Commit Graph
22 Commits
Author SHA1 Message Date
Michael Brown cff857461b [rng] Add RDRAND as an entropy source
Signed-off-by: Michael Brown <mcb30@ipxe.org>
2023-02-15 22:43:33 +00:00
Michael Brown 3ec2079ce2 [time] Add support for the ACPI power management timer
Allow the ACPI power management timer to be used if enabled via
TIMER_ACPI in config/timer.h.  This provides an alternative timer on
systems where the standard 8254 PIT is unavailable or unreliable.

Signed-off-by: Michael Brown <mcb30@ipxe.org>
2018-03-20 17:26:49 +02:00
Michael Brown 302f1eeb80 [time] Allow timer to be selected at runtime
Allow the active timer (providing udelay() and currticks()) to be
selected at runtime based on probing during the INIT_EARLY stage of
initialisation.

TICKS_PER_SEC is now a fixed compile-time constant for all builds, and
is independent of the underlying clock tick rate.  We choose the value
1024 to allow multiplications and divisions on seconds to be converted
to bit shifts.

TICKS_PER_MS is defined as 1, allowing multiplications and divisions
on milliseconds to be omitted entirely.  The 2% inaccuracy in this
definition is negligible when using the standard BIOS timer (running
at around 18.2Hz).

TIMER_RDTSC now checks for a constant TSC before claiming to be a
usable timer.  (This timer can be tested in KVM via the command-line
option "-cpu host,+invtsc".)

Signed-off-by: Michael Brown <mcb30@ipxe.org>
2017-01-26 08:17:37 +00:00
Michael Brown d37e025b81 [cpuid] Provide cpuid_supported() to test for supported functions
Signed-off-by: Michael Brown <mcb30@ipxe.org>
2017-01-25 20:57:18 +00:00
Michael Brown e19c0a8fd2 [acpi] Add support for ACPI power off
Signed-off-by: Michael Brown <mcb30@ipxe.org>
2016-07-11 14:05:18 +01:00
Michael Brown 74222cd2c1 [rng] Check for functioning RTC interrupt
On some platforms (observed in a small subset of Microsoft Azure
(Hyper-V) virtual machines), the RTC appears to be incapable of
generating an interrupt via the legacy PIC.  The RTC status registers
show that a periodic interrupt has been asserted, but the PIC IRR
shows that IRQ8 remains inactive.

On such systems, iPXE will currently freeze during the "iPXE
initialising devices..." message.

Work around this problem by checking that RTC interrupts are being
raised before returning from rtc_entropy_enable().  If no interrupt is
seen within 100ms, then we assume that the RTC interrupt mechanism is
broken.  In these circumstances, iPXE will continue to initialise but
any subsequent attempt to generate entropy will fail.  In particular,
HTTPS connections will fail with an error indicating that no entropy
is available.

Signed-off-by: Michael Brown <mcb30@ipxe.org>
2016-07-10 20:42:53 +01:00
Michael Brown 57d0ea7c46 [efi] Generalise EFI entropy generation to non-x86 CPUs
Signed-off-by: Michael Brown <mcb30@ipxe.org>
2016-05-04 14:34:24 +01:00
Michael Brown 311a5732c8 [gdb] Add support for x86_64
Signed-off-by: Michael Brown <mcb30@ipxe.org>
2016-03-22 08:44:32 +00:00
Michael Brown 611c9e39da [serial] Add general abstraction of a 16550-compatible UART
Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-06-29 11:03:05 +01:00
Michael Brown 3ec8b67818 [int13con] Add basic ability to log to a local disk via INT 13
Several popular public cloud providers do not provide any sensible
mechanism for obtaining debug output from an OS which is failing to
boot.  For example, Amazon EC2 provides the "Get System Log" facility,
which occasionally deigns to report a random subset of the characters
emitted via the VM's serial port, but usually returns only a blank
screen.  (Amazingly, this is still superior to the debugging
facilities provided by Azure.)

Work around these shortcomings by adding a console type which sends
output to a magically detected raw disk partition, and including such
a partition within any iPXE .usb-format image.

To use this facility:

 - build an iPXE .usb image with CONSOLE_INT13 enabled

 - boot the cloud VM from this image

 - after the boot fails, attach the VM's boot disk to a second VM

 - from this second VM, use "less -f -R /dev/sdb3" (or similar) to
   view the iPXE output.

Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-05-19 12:58:03 +01:00
Michael Brown eb2252fd7a [efi] Add EFI entropy source
Originally-implemented-by: Jarrod Johnson <jbjohnso@us.ibm.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-04-14 11:37:38 +01:00
Michael Brown 2f020a8df3 [legal] Relicense files under GPL2_OR_LATER_OR_UBDL
These files cannot be automatically relicensed by util/relicense.pl
since they either contain unusual but trivial contributions (such as
the addition of __nonnull function attributes), or contain lines
dating back to the initial git revision (and so require manual
knowledge of the code's origin).

Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-03-02 16:35:29 +00:00
Michael Brown d77a546fb4 [hyperv] Add support for Hyper-V hypervisor
Add support for detecting and communicating with the Hyper-V
hypervisor.

Signed-off-by: Michael Brown <mcb30@ipxe.org>
2014-12-18 16:27:27 +00:00
Michael Brown 036af27a45 [xen] Add basic support for PV-HVM domains
Add basic support for Xen PV-HVM domains (detected via the Xen
platform PCI device with IDs 5853:0001), including support for
accessing configuration via XenStore and enumerating devices via
XenBus.

Signed-off-by: Michael Brown <mcb30@ipxe.org>
2014-07-29 15:57:44 +01:00
Michael Brown aa2e04fe1c [vesafb] Add VESA frame buffer console
The VESA frame buffer console uses the VESA BIOS extensions (VBE) to
enumerate video modes, selects an appropriate mode, and then hands off
to the generic frame buffer code.

The font is extracted from the VGA BIOS, avoiding the need to provide
an external font file.

Signed-off-by: Michael Brown <mcb30@ipxe.org>
2013-11-28 05:55:45 +00:00
Michael Brown 55201e2d0e [settings] Expose CPUID instruction via settings mechanism
Allow CPUID values to be read using the syntax

  ${cpuid/<register>.<function>}

For example, ${cpuid/2.0x80000001} will give the value of %ecx after
calling CPUID with %eax=0x80000001.  Values for <register> are encoded
as %eax=0, %ebx=1, %ecx=2, %edx=3.

The numeric encoding is more sophisticated than described above,
allowing for settings such as the CPU model (obtained by calling CPUID
with %eax=0x80000002-0x80000004 inclusive and concatenating the values
returned in %eax:%ebx:%ecx:%edx).  See the source code for details.

The "cpuvendor" and "cpumodel" settings provide easy access to these
more complex CPUID settings.

This functionality is intended to complement the "cpuid" command,
which allows for testing individual CPUID feature bits.

Signed-off-by: Michael Brown <mcb30@ipxe.org>
2013-08-07 12:06:28 +01:00
Marin Hannache c0af8c0433 [cmdline] Add "poweroff" command
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Marin Hannache <git@mareo.fr>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
2013-07-15 13:49:48 +02:00
Michael Brown e411b37eb1 [pxe] Convert external PXE API errors into iPXE platform-generated errors
Signed-off-by: Michael Brown <mcb30@ipxe.org>
2013-04-29 19:58:25 +01:00
Michael Brown 4ca98693b9 [initrd] Add ability to reshuffle initrds into image list order
Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-11-12 21:56:20 +00:00
Michael Brown e6427b7ee1 [sdi] Add support for SDI images
Add support (disabled by default) for booting .sdi images as used by
Windows XP Embedded.

Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-09-05 14:11:01 +01:00
Michael Brown 591541af66 [cmdline] Add "cpuid" command
Allow x86 CPU feature flags (such as support for 64-bit mode) to be
checked using the "cpuid" command.

Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-06-07 00:37:04 +01:00
Michael Brown 734de43585 [build] Merge i386 and x86_64 versions of errfile.h
Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-06-06 15:21:34 +01:00