Commit Graph
14 Commits
Author SHA1 Message Date
Michael Brown 761ed4365a [usb] Do not attempt to disable USB3 hub ports
The USB3 specification removes PORT_ENABLE from the list of features
that may be cleared via a CLEAR_FEATURE request.  Experimentation
shows that omitting the attempt to clear PORT_ENABLE seems to result
in the correct hotplug behaviour.

Signed-off-by: Michael Brown <mcb30@ipxe.org>
2020-07-02 16:52:00 +01:00
Michael Brown 8ff5babb47 [usb] Add missing usb_recycle() for completed hub interrupt transfers
Signed-off-by: Michael Brown <mcb30@ipxe.org>
2020-07-02 14:19:02 +01:00
Michael Brown 71b83a6d00 [usb] Allow USB endpoints to specify a reserved header length for refills
Signed-off-by: Michael Brown <mcb30@ipxe.org>
2016-01-19 00:01:11 +00:00
Michael Brown 53ba5936b5 [usb] Allow additional settling time for out-of-spec hubs
Some hubs (e.g. the Avocent Corp. Virtual Hub on a Lenovo x3550
Integrated Management Module) have been observed to require more than
the standard 200ms for ports to stabilise, with the result that
devices appear to disconnect and immediately reconnect during the
initial bus enumeration.

Work around this problem by allowing specific hubs an extra 500ms of
settling time.

Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-12-07 13:16:47 +00:00
Michael Brown 15ce7ce355 [usb] Use port->disconnected to check for disconnected devices
The usb_message() and usb_stream() functions currently check for
port->speed==USB_SPEED_NONE to determine whether or not a device has
been unplugged.  This test will give a false negative result if a new
device has been plugged in before the hotplug mechanism has finished
handling the removal of the old device.

Fix by checking instead the port->disconnected flag, which is now
cleared only after completing the removal of the old device.

Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-12-07 13:08:22 +00:00
Michael Brown 668dc73d52 [usb] Allow for wildcard USB class IDs
Make the class ID a property of the USB driver (rather than a property
of the USB device ID), and allow USB drivers to specify a wildcard ID
for any of the three component IDs (class, subclass, or protocol).

Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-09-14 21:56:40 +01:00
Michael Brown 549a0caabb [usb] Select preferred USB device configuration based on driver score
Generate a score for each possible USB device configuration based on
the available driver support, and select the configuration with the
highest score.  This will allow us to prefer ECM over RNDIS (for
devices which support both) and will allow us to meaningfully select a
configuration even when we have drivers available for all functions
(e.g. when exposing unused functions via EFI_USB_IO_PROTOCOL).

Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-09-14 21:45:34 +01:00
Michael Brown 0eaa3a34bf [usb] Add USB_INTERRUPT_OUT internal type
Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-05-11 14:56:46 +01:00
Michael Brown f6604627ff [usb] Detect missed disconnections
The USB core will currently fail to detect disconnections if a new
device has attached by the time the port is examined in
usb_hotplug().

Fix by recording the fact that a disconnection has taken place
whenever the "connection status changed" (CSC) bit is observed to be
set.  (Whether the change represents a disconnection or a
reconnection, it indicates that the port has experienced some time of
being disconnected.)

Note that the time at which a disconnection can be detected varies by
hub type.  In particular: root hubs can observe the CSC bit when
polling, and so will record the disconnection before calling
usb_port_changed(), but USB hubs read the port status (and hence the
CSC bit) only during the call to hub_speed(), long after the call to
usb_port_changed().

Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-05-08 14:57:14 +01:00
Michael Brown 9e88194655 [usb] Add clear_tt() hub method to clear transaction translator buffer
Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-03-23 16:21:13 +00:00
Michael Brown b6ee89ffb5 [legal] Relicense files under GPL2_OR_LATER_OR_UBDL
Relicense files for which I am the sole author (as identified by
util/relicense.pl).

Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-03-02 14:17:31 +00:00
Michael Brown ebe433e795 [usb] Use generic refill framework for USB hub interrupt endpoints
Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-02-13 01:10:57 +00:00
Michael Brown 58c3e7f747 [usb] Allow usb_stream() to enforce a terminating short packet
Some USB endpoints require that a short packet be used to terminate
transfers, since they have no other way to determine message
boundaries.  If the message length happens to be an exact multiple of
the USB packet size, then this requires the use of an additional
zero-length packet.

Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-02-10 13:49:27 +00:00
Michael Brown e17e771a13 [usb] Add basic support for USB hubs
Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-02-03 12:19:52 +00:00