f59ad50504
Provide registration mechanism for loaded images, so that we can e.g. refer to them by name from the command line, or build them into a multiboot module list.
Michael Brown2007-01-11 23:43:29 +00:00
79a399c05a
alloca() can be useful in some (limited) circumstances.
Michael Brown2007-01-11 23:19:31 +00:00
f31d91bce5
Populate multiboot information structure before calling OS.
Michael Brown2007-01-11 21:21:02 +00:00
ddbc60b5ae
Whoever put together the grub multiboot.h header is insane.
Michael Brown2007-01-11 21:20:27 +00:00
c468c68661
Add command line that can be passed to executed images.
Michael Brown2007-01-11 21:19:29 +00:00
819cd3f41c
Limit -ENOEXEC to mean "this is not in my format".
Michael Brown2007-01-11 17:06:25 +00:00
6a03552381
Distinguish between ENOMEM (as representing a lack of internal memory as allocated by malloc()) versus all other errors, in particular ENOBUFS (representing a lack of external buffer space, e.g. in a device's TX queue or a user buffer).
Michael Brown2007-01-11 16:30:21 +00:00
c810baad37
Use generic "struct image" rather than "struct elf".
Michael Brown2007-01-11 16:10:32 +00:00
c6c63d954d
Rename "image" field to "data", because "image->image" is just confusing.
Michael Brown2007-01-11 16:07:30 +00:00
4fc9333159
Move include/image.h to include/gpxe/image.h
Michael Brown2007-01-11 16:04:36 +00:00
d84ec0e5d5
Had this file lying around for ages; may as well check it in.
Michael Brown2007-01-11 15:31:50 +00:00
91ac92bc86
Try image as ELF file first. (Don't yet actually try to execute it).
Michael Brown2007-01-11 15:27:06 +00:00
3460860bef
Print informative error message when boot fails.
Michael Brown2007-01-11 15:26:17 +00:00
230f16538f
Create include/gpxe/elf.h for the ELF bits that aren't part of the ELF standard and so don't belong in include/elf.h
Michael Brown2007-01-11 15:25:07 +00:00
0010e10ef3
Update TFTP to use a struct buffer rather than a callback.
Michael Brown2007-01-11 15:14:54 +00:00
d9204ef676
Use physical address in debug messages; they make more sense to read.
Michael Brown2007-01-11 15:08:58 +00:00
7ad1c2eaa8
Removed the Etherboot-specific ELF-image code and replaced it with a generic ELF loader, to be used by the multiboot code.
Michael Brown2007-01-11 14:44:03 +00:00
3634e705b7
Remove osloader.c and replace with a prep_segment() that uses userptr_t and get_memmap() in image/segment.c
Michael Brown2007-01-11 14:32:26 +00:00
c980cdd0aa
Move memmap.h out of arch/i386; it no longer contains anything architecture-dependent and is needed by the ELF code.
Michael Brown2007-01-11 14:08:44 +00:00
03390f0cd6
Use pkb_pad() rather than doing it the dangerous way :)
Michael Brown2007-01-11 05:26:16 +00:00
a3ed0cbbc7
Extract packet-padding login from rtl8139.c to a separate pkbpad.c file.
Michael Brown2007-01-11 05:25:50 +00:00
6918cf9e9e
Change FTP to use a data buffer rather than a callback function.
Michael Brown2007-01-11 04:51:20 +00:00
c0ef730ec4
Fix bug in buffer.c, add buffer mini-unit test.
Michael Brown2007-01-11 04:46:41 +00:00
83fa318b86
Added strerror(0)=="No error", so that TCP protocols can use strerror(rc) in their closed() methods without producing "Error 0x0000" when the connection is closed normally.
Michael Brown2007-01-11 04:01:31 +00:00
e2dcd05b67
Update buffer-handling code to enable expandable buffers.
Michael Brown2007-01-11 03:50:47 +00:00
bb2024c6d6
Move include/buffer.h to include/gpxe/buffer.h
Michael Brown2007-01-11 01:47:26 +00:00
de042993c0
Warn when net device on an active route is not open.
Michael Brown2007-01-10 20:58:36 +00:00
d45c5e7ce7
Add "route" command (which currently only displays the routing table; it can't modify it).
Michael Brown2007-01-10 20:51:14 +00:00
d9ba8f790b
Add route() function to display routing table.
Michael Brown2007-01-10 20:38:20 +00:00
78ded6604a
Try booting from the "boot" network device first (i.e. the one which we were loaded from). The code to identify this device isn't present yet, but the code to act upon the knowledge is.
Michael Brown2007-01-10 20:21:42 +00:00
77bb7b13a7
Having forced __table() to natural structure alignment, it now seems that we *can* place arrays in tables, which means we can force the order within a table without having to resort to explicitly numbered sections on everything.
Michael Brown2007-01-10 05:08:05 +00:00
dad5274522
Add "name" field to struct device to allow human-readable hardware device names.
Michael Brown2007-01-10 04:22:09 +00:00
cc9b32c405
Remove uIP; we haven't used it for quite some time now.
Michael Brown2007-01-10 02:52:58 +00:00
753e156844
Allow udp_{send,sendto,sendto_via} to be called outside of the udp_senddata() callback. This will simplify any UDP protocols that don't need the temporary buffer.
Michael Brown2007-01-10 02:46:39 +00:00
649b789e93
DHCP transmits via specified net device, so no need to create a dummy routing table entry just to fool ipv4.c any more.
Michael Brown2007-01-10 02:37:23 +00:00
c821a7b20d
Add udp_sendto_via() to allow e.g. DHCP to transmit without first having to set up dummy routing entries.
Michael Brown2007-01-10 02:31:38 +00:00
f008b77ba2
Allow an explicit network device to be specified for IP-layer transmissions.
Michael Brown2007-01-10 02:25:11 +00:00
55e590ab3a
Move header file for usr/autoboot.c to include/usr
Michael Brown2007-01-10 02:03:20 +00:00
d24b80acf2
Added network interface management commands
Michael Brown2007-01-10 01:55:07 +00:00
98b6154c3e
Add "name" field to network device, to facilitate netdev commands.
Michael Brown2007-01-09 23:48:18 +00:00
c65fae2475
Add RX quotas to the net device poll() method. This avoids the problem of alloc_pkb() exhaustion when e.g. an iSCSI-booted DOS session is left idle for a long time at the C:\ prompt and builds up a huge packet backlog.
Michael Brown2007-01-09 21:47:01 +00:00
e822bc2a90
Autopadding was sometimes overwriting the struct list_head at the end of the packet buffer. Although pkbuffs are guaranteed to be at least PKB_ZLEN bytes long, there's no guarantee that the data starts at the start of the packet buffer.
Michael Brown2007-01-09 21:01:55 +00:00
18e5353bed
Rename pkb_available() to pkb_tailroom() for consistency with Linux's skb_tailroom(). Add pkb_headroom().
Michael Brown2007-01-09 20:56:31 +00:00
b7fcfe8ece
Added net device TX queue; this will be needed to support the PXE UNDI API (which will need us to wait for TX completions).
Michael Brown2007-01-09 20:18:31 +00:00
8a268073a7
Move start/stop/expire debug messages to DBG2() level.
Michael Brown2007-01-09 17:39:52 +00:00
3c2cc59d25
Added ability to break ISR processing over several calls to poll(). This will allow us to implement RX quotas.
Michael Brown2007-01-09 17:04:10 +00:00
aa7bda7b47
Send EOI after enabling interrupt, in case the device had asserted IRQ to the PIC while it was disabled.
Michael Brown2007-01-09 14:53:19 +00:00
a2ffe8c123
Allow boot sector to completely destroy real-mode stack, but still manage to return control.
Michael Brown2007-01-09 14:13:59 +00:00
a9369bb503
Leave protected-mode return address on PM stack when issuing a real_call(), rather than moving it to the RM stack and back again. This allows the real-mode function to completely destroy the stack contents, provided that it manages to return to real_call().
Michael Brown2007-01-09 14:13:06 +00:00
70cc3a164a
Reset character attributes before start of welcome banner, in case it's a serial console and remembers state from the previous program run.
Michael Brown2007-01-09 04:51:27 +00:00
aaca21a2b6
We can't assert that the RX engine is idle in iscsi_done(), because it may be called during the RX data processor, before the RX engine transitions back to idle. It doesn't really matter if the RX engine isn't idle when iscsi_done() is called, because it will just pick up where it left off on the next call. (The same is not true for the TX engine, so keep the TX engine assertion.)
Michael Brown2007-01-09 04:42:23 +00:00
d606edb41d
Added UNDI root bus driver (which saves including all the PCI bus code, UNDI ROM code etc. when you just want a "undi.kpxe"-type image).
Michael Brown2007-01-09 03:20:22 +00:00
6b09dd8244
undipci_probe() has to calculate busdevfn anyway, so we may as well pass it directly to undi_load_pci().
Michael Brown2007-01-09 02:58:07 +00:00
ed44e3730d
Avoid erasing non-existent signatures in undi_unload()
Michael Brown2007-01-09 02:53:24 +00:00
a2be828a33
Avoid leaving preloaded_undi with invalid PXENV+/!PXE structure addresses if the signature checks fail.
Michael Brown2007-01-09 02:52:28 +00:00
697bcc9d24
Since we now always unload the base code stack (even if we keep UNDI), we can never return to the PXE stack and must always use INT 18.
Michael Brown2007-01-09 02:46:58 +00:00
f2f492a536
If preloaded device matches, use that rather than going via the UNDI loader.
Michael Brown2007-01-09 02:32:06 +00:00
2436dac281
Populate preloaded_undi device when applicable.
Michael Brown2007-01-09 02:29:54 +00:00
937289cdc8
Provide storage for an undi_device structure representing the preloaded UNDI stack.
Michael Brown2007-01-09 02:29:18 +00:00
47222d5ed8
Call PXENV_UNDI_GET_NIC_TYPE to identify NIC physical device.
Michael Brown2007-01-09 01:42:28 +00:00
cea2221737
Use fixed-width fields in struct undi_device, so that pxeprefix.S will be able to populate the structure.
Michael Brown2007-01-09 01:41:26 +00:00
fbdebac5f4
Copy pxelinux's shutdown sequence: use UNLOAD_STACK without STOP_BASE, and call UNDI_SHUTDOWN first to make sure the NIC is in a safe state.
Michael Brown2007-01-08 05:06:26 +00:00