A switch port using 802.1x authentication will send EAP Request-Identity packets once the physical link is up, and will not be forwarding packets until the port identity has been established. We do not currently support 802.1x authentication. However, a reasonably common configuration involves using a preset list of permitted MAC addresses, with the "authentication" taking place between the switch and a RADIUS server. In this configuration, the end device does not need to perform any authentication step, but does need to be prepared for the switch port to fail to forward packets for a substantial time after physical link-up. This exactly matches the "blocked link" semantics already used when detecting a non-forwarding switch port via LACP or STP. Treat a received EAP Request-Identity as indicating a blocked link. Unlike LACP or STP, there is no way to determine the expected time until the next EAP packet and so we must choose a fixed timeout. Erroneously assuming that the link is blocked is relatively harmless since we will still attempt to transmit and receive data even over a link that is marked as blocked, and so the net effect is merely to prolong DHCP attempts. In contrast, erroneously assuming that the link is unblocked will potentially cause DHCP to time out and give up, resulting in a failed boot. The default EAP Request-Identity interval in Cisco switches (where this is most likely to be encountered in practice) is 30 seconds, so choose 45 seconds as a timeout that is likely to avoid gaps during which we falsely assume that the link is unblocked. Signed-off-by: Michael Brown <mcb30@ipxe.org>
52 lines
1.4 KiB
C
52 lines
1.4 KiB
C
/*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
|
|
* 02110-1301, USA.
|
|
*
|
|
* You can also choose to distribute this program under the terms of
|
|
* the Unmodified Binary Distribution Licence (as given in the file
|
|
* COPYING.UBDL), provided that you have satisfied its requirements.
|
|
*/
|
|
|
|
FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
|
|
|
|
#include <config/general.h>
|
|
|
|
/** @file
|
|
*
|
|
* Ethernet configuration options
|
|
*
|
|
*/
|
|
|
|
PROVIDE_REQUIRING_SYMBOL();
|
|
|
|
/*
|
|
* Drag in Ethernet-specific protocols
|
|
*/
|
|
#ifdef SANBOOT_PROTO_AOE
|
|
REQUIRE_OBJECT ( aoe );
|
|
#endif
|
|
#ifdef NET_PROTO_FCOE
|
|
REQUIRE_OBJECT ( fcoe );
|
|
#endif
|
|
#ifdef NET_PROTO_STP
|
|
REQUIRE_OBJECT ( stp );
|
|
#endif
|
|
#ifdef NET_PROTO_LACP
|
|
REQUIRE_OBJECT ( eth_slow );
|
|
#endif
|
|
#ifdef NET_PROTO_EAPOL
|
|
REQUIRE_OBJECT ( eapol );
|
|
#endif
|