Copy from GitHub repo
@@ -1,2 +1,28 @@
|
||||
# Openstack Deployment
|
||||
|
||||
## Scripts and Guides for enviroment setup
|
||||
|
||||
### 1. create-journal-on-ssd.sh ###
|
||||
This script used for creating joudnal partitions (4 partitions hardcoded) on drive, that alredy have other partition.
|
||||
|
||||
partition that created are logical, firstly created extended partition for all logical.
|
||||
|
||||
SYNTAX:
|
||||
|
||||
```create-journal-on-ssd.sh {device} {size in %}```
|
||||
|
||||
example:
|
||||
|
||||
``` #./create-journal-on-ssd.sh /dev/sde 10```
|
||||
|
||||
### 2. create-journal-on-ssd-gpt.sh ###
|
||||
This script used for creating joudnal partitions (4 partitions hardcoded) on GPT drive, that alredy have other partition.
|
||||
|
||||
|
||||
SYNTAX:
|
||||
|
||||
```create-journal-on-ssd-gpt.sh {device} {size in %}```
|
||||
|
||||
example:
|
||||
|
||||
``` #./create-journal-on-ssd-gpt.sh /dev/sde 10```
|
||||
|
||||
@@ -0,0 +1,496 @@
|
||||
# config file for ansible -- https://ansible.com/
|
||||
# ===============================================
|
||||
|
||||
# nearly all parameters can be overridden in ansible-playbook
|
||||
# or with command line flags. ansible will read ANSIBLE_CONFIG,
|
||||
# ansible.cfg in the current working directory, .ansible.cfg in
|
||||
# the home directory or /etc/ansible/ansible.cfg, whichever it
|
||||
# finds first
|
||||
|
||||
[defaults]
|
||||
|
||||
# some basic default values...
|
||||
|
||||
#inventory = /etc/ansible/hosts
|
||||
#library = /usr/share/my_modules/
|
||||
#module_utils = /usr/share/my_module_utils/
|
||||
#remote_tmp = ~/.ansible/tmp
|
||||
#local_tmp = ~/.ansible/tmp
|
||||
#plugin_filters_cfg = /etc/ansible/plugin_filters.yml
|
||||
#forks = 5
|
||||
#poll_interval = 15
|
||||
#sudo_user = root
|
||||
#ask_sudo_pass = True
|
||||
#ask_pass = True
|
||||
#transport = smart
|
||||
#remote_port = 22
|
||||
#module_lang = C
|
||||
#module_set_locale = False
|
||||
|
||||
# plays will gather facts by default, which contain information about
|
||||
# the remote system.
|
||||
#
|
||||
# smart - gather by default, but don't regather if already gathered
|
||||
# implicit - gather by default, turn off with gather_facts: False
|
||||
# explicit - do not gather by default, must say gather_facts: True
|
||||
#gathering = implicit
|
||||
|
||||
# This only affects the gathering done by a play's gather_facts directive,
|
||||
# by default gathering retrieves all facts subsets
|
||||
# all - gather all subsets
|
||||
# network - gather min and network facts
|
||||
# hardware - gather hardware facts (longest facts to retrieve)
|
||||
# virtual - gather min and virtual facts
|
||||
# facter - import facts from facter
|
||||
# ohai - import facts from ohai
|
||||
# You can combine them using comma (ex: network,virtual)
|
||||
# You can negate them using ! (ex: !hardware,!facter,!ohai)
|
||||
# A minimal set of facts is always gathered.
|
||||
#gather_subset = all
|
||||
|
||||
# some hardware related facts are collected
|
||||
# with a maximum timeout of 10 seconds. This
|
||||
# option lets you increase or decrease that
|
||||
# timeout to something more suitable for the
|
||||
# environment.
|
||||
# gather_timeout = 10
|
||||
|
||||
# Ansible facts are available inside the ansible_facts.* dictionary
|
||||
# namespace. This setting maintains the behaviour which was the default prior
|
||||
# to 2.5, duplicating these variables into the main namespace, each with a
|
||||
# prefix of 'ansible_'.
|
||||
# This variable is set to True by default for backwards compatibility. It
|
||||
# will be changed to a default of 'False' in a future release.
|
||||
# ansible_facts.
|
||||
# inject_facts_as_vars = True
|
||||
|
||||
# additional paths to search for roles in, colon separated
|
||||
#roles_path = /etc/ansible/roles
|
||||
|
||||
# uncomment this to disable SSH key host checking
|
||||
#host_key_checking = False
|
||||
|
||||
# change the default callback, you can only have one 'stdout' type enabled at a time.
|
||||
#stdout_callback = skippy
|
||||
|
||||
|
||||
## Ansible ships with some plugins that require whitelisting,
|
||||
## this is done to avoid running all of a type by default.
|
||||
## These setting lists those that you want enabled for your system.
|
||||
## Custom plugins should not need this unless plugin author specifies it.
|
||||
|
||||
# enable callback plugins, they can output to stdout but cannot be 'stdout' type.
|
||||
#callback_whitelist = timer, mail
|
||||
|
||||
# Determine whether includes in tasks and handlers are "static" by
|
||||
# default. As of 2.0, includes are dynamic by default. Setting these
|
||||
# values to True will make includes behave more like they did in the
|
||||
# 1.x versions.
|
||||
#task_includes_static = False
|
||||
#handler_includes_static = False
|
||||
|
||||
# Controls if a missing handler for a notification event is an error or a warning
|
||||
#error_on_missing_handler = True
|
||||
|
||||
# change this for alternative sudo implementations
|
||||
#sudo_exe = sudo
|
||||
|
||||
# What flags to pass to sudo
|
||||
# WARNING: leaving out the defaults might create unexpected behaviours
|
||||
#sudo_flags = -H -S -n
|
||||
|
||||
# SSH timeout
|
||||
#timeout = 10
|
||||
|
||||
# default user to use for playbooks if user is not specified
|
||||
# (/usr/bin/ansible will use current user as default)
|
||||
#remote_user = root
|
||||
|
||||
# logging is off by default unless this path is defined
|
||||
# if so defined, consider logrotate
|
||||
#log_path = /var/log/ansible.log
|
||||
|
||||
# default module name for /usr/bin/ansible
|
||||
#module_name = command
|
||||
|
||||
# use this shell for commands executed under sudo
|
||||
# you may need to change this to bin/bash in rare instances
|
||||
# if sudo is constrained
|
||||
#executable = /bin/sh
|
||||
|
||||
# if inventory variables overlap, does the higher precedence one win
|
||||
# or are hash values merged together? The default is 'replace' but
|
||||
# this can also be set to 'merge'.
|
||||
#hash_behaviour = replace
|
||||
|
||||
# by default, variables from roles will be visible in the global variable
|
||||
# scope. To prevent this, the following option can be enabled, and only
|
||||
# tasks and handlers within the role will see the variables there
|
||||
#private_role_vars = yes
|
||||
|
||||
# list any Jinja2 extensions to enable here:
|
||||
#jinja2_extensions = jinja2.ext.do,jinja2.ext.i18n
|
||||
|
||||
# if set, always use this private key file for authentication, same as
|
||||
# if passing --private-key to ansible or ansible-playbook
|
||||
#private_key_file = /path/to/file
|
||||
|
||||
# If set, configures the path to the Vault password file as an alternative to
|
||||
# specifying --vault-password-file on the command line.
|
||||
#vault_password_file = /path/to/vault_password_file
|
||||
|
||||
# format of string {{ ansible_managed }} available within Jinja2
|
||||
# templates indicates to users editing templates files will be replaced.
|
||||
# replacing {file}, {host} and {uid} and strftime codes with proper values.
|
||||
#ansible_managed = Ansible managed: {file} modified on %Y-%m-%d %H:%M:%S by {uid} on {host}
|
||||
# {file}, {host}, {uid}, and the timestamp can all interfere with idempotence
|
||||
# in some situations so the default is a static string:
|
||||
#ansible_managed = Ansible managed
|
||||
|
||||
# by default, ansible-playbook will display "Skipping [host]" if it determines a task
|
||||
# should not be run on a host. Set this to "False" if you don't want to see these "Skipping"
|
||||
# messages. NOTE: the task header will still be shown regardless of whether or not the
|
||||
# task is skipped.
|
||||
#display_skipped_hosts = True
|
||||
|
||||
# by default, if a task in a playbook does not include a name: field then
|
||||
# ansible-playbook will construct a header that includes the task's action but
|
||||
# not the task's args. This is a security feature because ansible cannot know
|
||||
# if the *module* considers an argument to be no_log at the time that the
|
||||
# header is printed. If your environment doesn't have a problem securing
|
||||
# stdout from ansible-playbook (or you have manually specified no_log in your
|
||||
# playbook on all of the tasks where you have secret information) then you can
|
||||
# safely set this to True to get more informative messages.
|
||||
#display_args_to_stdout = False
|
||||
|
||||
# by default (as of 1.3), Ansible will raise errors when attempting to dereference
|
||||
# Jinja2 variables that are not set in templates or action lines. Uncomment this line
|
||||
# to revert the behavior to pre-1.3.
|
||||
#error_on_undefined_vars = False
|
||||
|
||||
# by default (as of 1.6), Ansible may display warnings based on the configuration of the
|
||||
# system running ansible itself. This may include warnings about 3rd party packages or
|
||||
# other conditions that should be resolved if possible.
|
||||
# to disable these warnings, set the following value to False:
|
||||
#system_warnings = True
|
||||
|
||||
# by default (as of 1.4), Ansible may display deprecation warnings for language
|
||||
# features that should no longer be used and will be removed in future versions.
|
||||
# to disable these warnings, set the following value to False:
|
||||
#deprecation_warnings = True
|
||||
|
||||
# (as of 1.8), Ansible can optionally warn when usage of the shell and
|
||||
# command module appear to be simplified by using a default Ansible module
|
||||
# instead. These warnings can be silenced by adjusting the following
|
||||
# setting or adding warn=yes or warn=no to the end of the command line
|
||||
# parameter string. This will for example suggest using the git module
|
||||
# instead of shelling out to the git command.
|
||||
# command_warnings = False
|
||||
|
||||
|
||||
# set plugin path directories here, separate with colons
|
||||
#action_plugins = /usr/share/ansible/plugins/action
|
||||
#cache_plugins = /usr/share/ansible/plugins/cache
|
||||
#callback_plugins = /usr/share/ansible/plugins/callback
|
||||
#connection_plugins = /usr/share/ansible/plugins/connection
|
||||
#lookup_plugins = /usr/share/ansible/plugins/lookup
|
||||
#inventory_plugins = /usr/share/ansible/plugins/inventory
|
||||
#vars_plugins = /usr/share/ansible/plugins/vars
|
||||
#filter_plugins = /usr/share/ansible/plugins/filter
|
||||
#test_plugins = /usr/share/ansible/plugins/test
|
||||
#terminal_plugins = /usr/share/ansible/plugins/terminal
|
||||
#strategy_plugins = /usr/share/ansible/plugins/strategy
|
||||
|
||||
|
||||
# by default, ansible will use the 'linear' strategy but you may want to try
|
||||
# another one
|
||||
#strategy = free
|
||||
|
||||
# by default callbacks are not loaded for /bin/ansible, enable this if you
|
||||
# want, for example, a notification or logging callback to also apply to
|
||||
# /bin/ansible runs
|
||||
#bin_ansible_callbacks = False
|
||||
|
||||
|
||||
# don't like cows? that's unfortunate.
|
||||
# set to 1 if you don't want cowsay support or export ANSIBLE_NOCOWS=1
|
||||
#nocows = 1
|
||||
|
||||
# set which cowsay stencil you'd like to use by default. When set to 'random',
|
||||
# a random stencil will be selected for each task. The selection will be filtered
|
||||
# against the `cow_whitelist` option below.
|
||||
#cow_selection = default
|
||||
#cow_selection = random
|
||||
|
||||
# when using the 'random' option for cowsay, stencils will be restricted to this list.
|
||||
# it should be formatted as a comma-separated list with no spaces between names.
|
||||
# NOTE: line continuations here are for formatting purposes only, as the INI parser
|
||||
# in python does not support them.
|
||||
#cow_whitelist=bud-frogs,bunny,cheese,daemon,default,dragon,elephant-in-snake,elephant,eyes,\
|
||||
# hellokitty,kitty,luke-koala,meow,milk,moofasa,moose,ren,sheep,small,stegosaurus,\
|
||||
# stimpy,supermilker,three-eyes,turkey,turtle,tux,udder,vader-koala,vader,www
|
||||
|
||||
# don't like colors either?
|
||||
# set to 1 if you don't want colors, or export ANSIBLE_NOCOLOR=1
|
||||
#nocolor = 1
|
||||
|
||||
# if set to a persistent type (not 'memory', for example 'redis') fact values
|
||||
# from previous runs in Ansible will be stored. This may be useful when
|
||||
# wanting to use, for example, IP information from one group of servers
|
||||
# without having to talk to them in the same playbook run to get their
|
||||
# current IP information.
|
||||
#fact_caching = memory
|
||||
|
||||
#This option tells Ansible where to cache facts. The value is plugin dependent.
|
||||
#For the jsonfile plugin, it should be a path to a local directory.
|
||||
#For the redis plugin, the value is a host:port:database triplet: fact_caching_connection = localhost:6379:0
|
||||
|
||||
#fact_caching_connection=/tmp
|
||||
|
||||
|
||||
|
||||
# retry files
|
||||
# When a playbook fails by default a .retry file will be created in ~/
|
||||
# You can disable this feature by setting retry_files_enabled to False
|
||||
# and you can change the location of the files by setting retry_files_save_path
|
||||
|
||||
#retry_files_enabled = False
|
||||
#retry_files_save_path = ~/.ansible-retry
|
||||
|
||||
# squash actions
|
||||
# Ansible can optimise actions that call modules with list parameters
|
||||
# when looping. Instead of calling the module once per with_ item, the
|
||||
# module is called once with all items at once. Currently this only works
|
||||
# under limited circumstances, and only with parameters named 'name'.
|
||||
#squash_actions = apk,apt,dnf,homebrew,pacman,pkgng,yum,zypper
|
||||
|
||||
# prevents logging of task data, off by default
|
||||
#no_log = False
|
||||
|
||||
# prevents logging of tasks, but only on the targets, data is still logged on the master/controller
|
||||
#no_target_syslog = False
|
||||
|
||||
# controls whether Ansible will raise an error or warning if a task has no
|
||||
# choice but to create world readable temporary files to execute a module on
|
||||
# the remote machine. This option is False by default for security. Users may
|
||||
# turn this on to have behaviour more like Ansible prior to 2.1.x. See
|
||||
# https://docs.ansible.com/ansible/become.html#becoming-an-unprivileged-user
|
||||
# for more secure ways to fix this than enabling this option.
|
||||
#allow_world_readable_tmpfiles = False
|
||||
|
||||
# controls the compression level of variables sent to
|
||||
# worker processes. At the default of 0, no compression
|
||||
# is used. This value must be an integer from 0 to 9.
|
||||
#var_compression_level = 9
|
||||
|
||||
# controls what compression method is used for new-style ansible modules when
|
||||
# they are sent to the remote system. The compression types depend on having
|
||||
# support compiled into both the controller's python and the client's python.
|
||||
# The names should match with the python Zipfile compression types:
|
||||
# * ZIP_STORED (no compression. available everywhere)
|
||||
# * ZIP_DEFLATED (uses zlib, the default)
|
||||
# These values may be set per host via the ansible_module_compression inventory
|
||||
# variable
|
||||
#module_compression = 'ZIP_DEFLATED'
|
||||
|
||||
# This controls the cutoff point (in bytes) on --diff for files
|
||||
# set to 0 for unlimited (RAM may suffer!).
|
||||
#max_diff_size = 1048576
|
||||
|
||||
# This controls how ansible handles multiple --tags and --skip-tags arguments
|
||||
# on the CLI. If this is True then multiple arguments are merged together. If
|
||||
# it is False, then the last specified argument is used and the others are ignored.
|
||||
# This option will be removed in 2.8.
|
||||
#merge_multiple_cli_flags = True
|
||||
|
||||
# Controls showing custom stats at the end, off by default
|
||||
#show_custom_stats = True
|
||||
|
||||
# Controls which files to ignore when using a directory as inventory with
|
||||
# possibly multiple sources (both static and dynamic)
|
||||
#inventory_ignore_extensions = ~, .orig, .bak, .ini, .cfg, .retry, .pyc, .pyo
|
||||
|
||||
# This family of modules use an alternative execution path optimized for network appliances
|
||||
# only update this setting if you know how this works, otherwise it can break module execution
|
||||
#network_group_modules=eos, nxos, ios, iosxr, junos, vyos
|
||||
|
||||
# When enabled, this option allows lookups (via variables like {{lookup('foo')}} or when used as
|
||||
# a loop with `with_foo`) to return data that is not marked "unsafe". This means the data may contain
|
||||
# jinja2 templating language which will be run through the templating engine.
|
||||
# ENABLING THIS COULD BE A SECURITY RISK
|
||||
#allow_unsafe_lookups = False
|
||||
|
||||
# set default errors for all plays
|
||||
#any_errors_fatal = False
|
||||
|
||||
[inventory]
|
||||
# enable inventory plugins, default: 'host_list', 'script', 'yaml', 'ini'
|
||||
#enable_plugins = host_list, virtualbox, yaml, constructed
|
||||
|
||||
# ignore these extensions when parsing a directory as inventory source
|
||||
#ignore_extensions = .pyc, .pyo, .swp, .bak, ~, .rpm, .md, .txt, ~, .orig, .ini, .cfg, .retry
|
||||
|
||||
# ignore files matching these patterns when parsing a directory as inventory source
|
||||
#ignore_patterns=
|
||||
|
||||
# If 'true' unparsed inventory sources become fatal errors, they are warnings otherwise.
|
||||
#unparsed_is_failed=False
|
||||
|
||||
[privilege_escalation]
|
||||
#become=True
|
||||
#become_method=sudo
|
||||
#become_user=root
|
||||
#become_ask_pass=False
|
||||
|
||||
[paramiko_connection]
|
||||
|
||||
# uncomment this line to cause the paramiko connection plugin to not record new host
|
||||
# keys encountered. Increases performance on new host additions. Setting works independently of the
|
||||
# host key checking setting above.
|
||||
#record_host_keys=False
|
||||
|
||||
# by default, Ansible requests a pseudo-terminal for commands executed under sudo. Uncomment this
|
||||
# line to disable this behaviour.
|
||||
#pty=False
|
||||
|
||||
# paramiko will default to looking for SSH keys initially when trying to
|
||||
# authenticate to remote devices. This is a problem for some network devices
|
||||
# that close the connection after a key failure. Uncomment this line to
|
||||
# disable the Paramiko look for keys function
|
||||
#look_for_keys = False
|
||||
|
||||
# When using persistent connections with Paramiko, the connection runs in a
|
||||
# background process. If the host doesn't already have a valid SSH key, by
|
||||
# default Ansible will prompt to add the host key. This will cause connections
|
||||
# running in background processes to fail. Uncomment this line to have
|
||||
# Paramiko automatically add host keys.
|
||||
#host_key_auto_add = True
|
||||
|
||||
[ssh_connection]
|
||||
|
||||
# ssh arguments to use
|
||||
# Leaving off ControlPersist will result in poor performance, so use
|
||||
# paramiko on older platforms rather than removing it, -C controls compression use
|
||||
#ssh_args = -C -o ControlMaster=auto -o ControlPersist=60s
|
||||
|
||||
# The base directory for the ControlPath sockets.
|
||||
# This is the "%(directory)s" in the control_path option
|
||||
#
|
||||
# Example:
|
||||
# control_path_dir = /tmp/.ansible/cp
|
||||
#control_path_dir = ~/.ansible/cp
|
||||
|
||||
# The path to use for the ControlPath sockets. This defaults to a hashed string of the hostname,
|
||||
# port and username (empty string in the config). The hash mitigates a common problem users
|
||||
# found with long hostames and the conventional %(directory)s/ansible-ssh-%%h-%%p-%%r format.
|
||||
# In those cases, a "too long for Unix domain socket" ssh error would occur.
|
||||
#
|
||||
# Example:
|
||||
# control_path = %(directory)s/%%h-%%r
|
||||
#control_path =
|
||||
|
||||
# Enabling pipelining reduces the number of SSH operations required to
|
||||
# execute a module on the remote server. This can result in a significant
|
||||
# performance improvement when enabled, however when using "sudo:" you must
|
||||
# first disable 'requiretty' in /etc/sudoers
|
||||
#
|
||||
# By default, this option is disabled to preserve compatibility with
|
||||
# sudoers configurations that have requiretty (the default on many distros).
|
||||
#
|
||||
#pipelining = False
|
||||
|
||||
# Control the mechanism for transferring files (old)
|
||||
# * smart = try sftp and then try scp [default]
|
||||
# * True = use scp only
|
||||
# * False = use sftp only
|
||||
#scp_if_ssh = smart
|
||||
|
||||
# Control the mechanism for transferring files (new)
|
||||
# If set, this will override the scp_if_ssh option
|
||||
# * sftp = use sftp to transfer files
|
||||
# * scp = use scp to transfer files
|
||||
# * piped = use 'dd' over SSH to transfer files
|
||||
# * smart = try sftp, scp, and piped, in that order [default]
|
||||
#transfer_method = smart
|
||||
|
||||
# if False, sftp will not use batch mode to transfer files. This may cause some
|
||||
# types of file transfer failures impossible to catch however, and should
|
||||
# only be disabled if your sftp version has problems with batch mode
|
||||
#sftp_batch_mode = False
|
||||
|
||||
# The -tt argument is passed to ssh when pipelining is not enabled because sudo
|
||||
# requires a tty by default.
|
||||
#use_tty = True
|
||||
|
||||
# Number of times to retry an SSH connection to a host, in case of UNREACHABLE.
|
||||
# For each retry attempt, there is an exponential backoff,
|
||||
# so after the first attempt there is 1s wait, then 2s, 4s etc. up to 30s (max).
|
||||
#retries = 3
|
||||
|
||||
[persistent_connection]
|
||||
|
||||
# Configures the persistent connection timeout value in seconds. This value is
|
||||
# how long the persistent connection will remain idle before it is destroyed.
|
||||
# If the connection doesn't receive a request before the timeout value
|
||||
# expires, the connection is shutdown. The default value is 30 seconds.
|
||||
#connect_timeout = 30
|
||||
|
||||
# Configures the persistent connection retry timeout. This value configures the
|
||||
# the retry timeout that ansible-connection will wait to connect
|
||||
# to the local domain socket. This value must be larger than the
|
||||
# ssh timeout (timeout) and less than persistent connection idle timeout (connect_timeout).
|
||||
# The default value is 15 seconds.
|
||||
#connect_retry_timeout = 15
|
||||
|
||||
# The command timeout value defines the amount of time to wait for a command
|
||||
# or RPC call before timing out. The value for the command timeout must
|
||||
# be less than the value of the persistent connection idle timeout (connect_timeout)
|
||||
# The default value is 10 second.
|
||||
#command_timeout = 10
|
||||
|
||||
[accelerate]
|
||||
#accelerate_port = 5099
|
||||
#accelerate_timeout = 30
|
||||
#accelerate_connect_timeout = 5.0
|
||||
|
||||
# The daemon timeout is measured in minutes. This time is measured
|
||||
# from the last activity to the accelerate daemon.
|
||||
#accelerate_daemon_timeout = 30
|
||||
|
||||
# If set to yes, accelerate_multi_key will allow multiple
|
||||
# private keys to be uploaded to it, though each user must
|
||||
# have access to the system via SSH to add a new key. The default
|
||||
# is "no".
|
||||
#accelerate_multi_key = yes
|
||||
|
||||
[selinux]
|
||||
# file systems that require special treatment when dealing with security context
|
||||
# the default behaviour that copies the existing context or uses the user default
|
||||
# needs to be changed to use the file system dependent context.
|
||||
#special_context_filesystems=nfs,vboxsf,fuse,ramfs,9p
|
||||
|
||||
# Set this to yes to allow libvirt_lxc connections to work without SELinux.
|
||||
#libvirt_lxc_noseclabel = yes
|
||||
|
||||
[colors]
|
||||
#highlight = white
|
||||
#verbose = blue
|
||||
#warn = bright purple
|
||||
#error = red
|
||||
#debug = dark gray
|
||||
#deprecate = purple
|
||||
#skip = cyan
|
||||
#unreachable = red
|
||||
#ok = green
|
||||
#changed = yellow
|
||||
#diff_add = green
|
||||
#diff_remove = red
|
||||
#diff_lines = cyan
|
||||
|
||||
|
||||
[diff]
|
||||
# Always print diff when running ( same as always running with -D/--diff )
|
||||
# always = no
|
||||
|
||||
# Set how many context lines to show in diff
|
||||
# context = 3
|
||||
@@ -0,0 +1,34 @@
|
||||
[DEFAULT]
|
||||
transport_url = rabbit://openstack:GAQ5q55LTj9D@controller-virt
|
||||
[compute]
|
||||
[coordination]
|
||||
[dispatcher_gnocchi]
|
||||
[event]
|
||||
[hardware]
|
||||
[ipmi]
|
||||
[matchmaker_redis]
|
||||
[meter]
|
||||
[notification]
|
||||
[oslo_concurrency]
|
||||
[oslo_messaging_amqp]
|
||||
[oslo_messaging_kafka]
|
||||
[oslo_messaging_notifications]
|
||||
[oslo_messaging_rabbit]
|
||||
[oslo_messaging_zmq]
|
||||
[polling]
|
||||
[publisher]
|
||||
[publisher_notifier]
|
||||
[rgw_admin_credentials]
|
||||
[service_credentials]
|
||||
auth_url = http://controller-virt:5000
|
||||
project_domain_id = default
|
||||
user_domain_id = default
|
||||
auth_type = password
|
||||
username = ceilometer
|
||||
project_name = service
|
||||
password = PhCiXGXFlL
|
||||
interface = internalURL
|
||||
region_name = RegionOne
|
||||
[service_types]
|
||||
[vmware]
|
||||
[xenapi]
|
||||
@@ -0,0 +1,2 @@
|
||||
[client.vms]
|
||||
key = AQBFsIFbK1PlGhAAA7dg70FdghDmIZGF32157Q==
|
||||
@@ -0,0 +1,6 @@
|
||||
server 172.16.4.11 iburst
|
||||
server 172.16.4.95 iburst
|
||||
driftfile /var/lib/chrony/drift
|
||||
makestep 1.0 3
|
||||
rtcsync
|
||||
logdir /var/log/chrony
|
||||
@@ -0,0 +1 @@
|
||||
AQCBF4BbaRoNIxAAZXoWxwAnQdgdScJrpR054w==
|
||||
@@ -0,0 +1 @@
|
||||
AQBFsIFbK1PlGhAAA7dg70FdghDmIZGF32157Q==
|
||||
@@ -0,0 +1 @@
|
||||
uio_pci_generic
|
||||
@@ -0,0 +1,14 @@
|
||||
[Unit]
|
||||
Description=HugeTLB Gigantic Pages Reservation
|
||||
DefaultDependencies=no
|
||||
Before=dev-hugepages.mount
|
||||
ConditionPathExists=/sys/devices/system/node
|
||||
|
||||
|
||||
[Service]
|
||||
Type=oneshot
|
||||
RemainAfterExit=yes
|
||||
ExecStart=/usr/lib/systemd/hugetlb-reserve-pages.sh
|
||||
|
||||
[Install]
|
||||
WantedBy=sysinit.target
|
||||
@@ -0,0 +1,25 @@
|
||||
#!/bin/sh
|
||||
|
||||
nodes_path=/sys/devices/system/node/
|
||||
if [ ! -d $nodes_path ]; then
|
||||
echo "ERROR: $nodes_path does not exist"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
reserve_pages()
|
||||
{
|
||||
echo $1 > $nodes_path/$2/hugepages/hugepages-2048kB/nr_hugepages
|
||||
}
|
||||
|
||||
|
||||
nodes=$(ls /sys/devices/system/node/ | grep node)
|
||||
|
||||
|
||||
for i in $nodes; do
|
||||
if [[ $i == node0 ]]
|
||||
then
|
||||
reserve_pages 512 $i
|
||||
else
|
||||
reserve_pages 0 $i
|
||||
fi
|
||||
done
|
||||
@@ -0,0 +1,8 @@
|
||||
TYPE=Bridge
|
||||
NAME=br2
|
||||
DEVICE=br2
|
||||
ONBOOT=yes
|
||||
BOOTPROTO=none
|
||||
NOZEROCONF=yes
|
||||
ZONE=public
|
||||
MTU=9000
|
||||
@@ -0,0 +1,7 @@
|
||||
VLAN=yes
|
||||
NAME=vlan165
|
||||
DEVICE=vlan165
|
||||
PHYSDEV=bond0
|
||||
VLAN_NAME_TYPE=VLAN_PLUS_VID_PAD
|
||||
BRIDGE=br2
|
||||
VLAN_ID=165
|
||||
@@ -0,0 +1,4 @@
|
||||
options kvm-intel nested=1
|
||||
options kvm-intel enable_shadow_vmcs=1
|
||||
options kvm-intel enable_apicv=1
|
||||
options kvm-intel ept=1
|
||||
@@ -0,0 +1,33 @@
|
||||
# Override the default config file
|
||||
# NOTE: This setting is no longer honoured if using
|
||||
# systemd. Set '--config /etc/libvirt/libvirtd.conf'
|
||||
# in LIBVIRTD_ARGS instead.
|
||||
#LIBVIRTD_CONFIG=/etc/libvirt/libvirtd.conf
|
||||
|
||||
# Listen for TCP/IP connections
|
||||
# NB. must setup TLS/SSL keys prior to using this
|
||||
LIBVIRTD_ARGS="--listen"
|
||||
|
||||
# Override Kerberos service keytab for SASL/GSSAPI
|
||||
#KRB5_KTNAME=/etc/libvirt/krb5.tab
|
||||
|
||||
# Override the QEMU/SDL default audio driver probing when
|
||||
# starting virtual machines using SDL graphics
|
||||
#
|
||||
# NB these have no effect for VMs using VNC, unless vnc_allow_host_audio
|
||||
# is enabled in /etc/libvirt/qemu.conf
|
||||
#QEMU_AUDIO_DRV=sdl
|
||||
#
|
||||
#SDL_AUDIODRIVER=pulse
|
||||
|
||||
# Override the maximum number of opened files.
|
||||
# This only works with traditional init scripts.
|
||||
# In the systemd world, the limit can only be changed by overriding
|
||||
# LimitNOFILE for libvirtd.service. To do that, just create a *.conf
|
||||
# file in /etc/systemd/system/libvirtd.service.d/ (for example
|
||||
# /etc/systemd/system/libvirtd.service.d/openfiles.conf) and write
|
||||
# the following two lines in it:
|
||||
# [Service]
|
||||
# LimitNOFILE=2048
|
||||
#
|
||||
#LIBVIRTD_NOFILES_LIMIT=2048
|
||||
@@ -0,0 +1,468 @@
|
||||
# Master libvirt daemon configuration file
|
||||
#
|
||||
# For further information consult https://libvirt.org/format.html
|
||||
#
|
||||
# NOTE: the tests/daemon-conf regression test script requires
|
||||
# that each "PARAMETER = VALUE" line in this file have the parameter
|
||||
# name just after a leading "#".
|
||||
|
||||
#################################################################
|
||||
#
|
||||
# Network connectivity controls
|
||||
#
|
||||
|
||||
# Flag listening for secure TLS connections on the public TCP/IP port.
|
||||
# NB, must pass the --listen flag to the libvirtd process for this to
|
||||
# have any effect.
|
||||
#
|
||||
# It is necessary to setup a CA and issue server certificates before
|
||||
# using this capability.
|
||||
#
|
||||
# This is enabled by default, uncomment this to disable it
|
||||
listen_tls = 0
|
||||
|
||||
# Listen for unencrypted TCP connections on the public TCP/IP port.
|
||||
# NB, must pass the --listen flag to the libvirtd process for this to
|
||||
# have any effect.
|
||||
#
|
||||
# Using the TCP socket requires SASL authentication by default. Only
|
||||
# SASL mechanisms which support data encryption are allowed. This is
|
||||
# DIGEST_MD5 and GSSAPI (Kerberos5)
|
||||
#
|
||||
# This is disabled by default, uncomment this to enable it.
|
||||
listen_tcp = 1
|
||||
|
||||
|
||||
|
||||
# Override the port for accepting secure TLS connections
|
||||
# This can be a port number, or service name
|
||||
#
|
||||
#tls_port = "16514"
|
||||
|
||||
# Override the port for accepting insecure TCP connections
|
||||
# This can be a port number, or service name
|
||||
#
|
||||
#tcp_port = "16509"
|
||||
|
||||
|
||||
# Override the default configuration which binds to all network
|
||||
# interfaces. This can be a numeric IPv4/6 address, or hostname
|
||||
#
|
||||
# If the libvirtd service is started in parallel with network
|
||||
# startup (e.g. with systemd), binding to addresses other than
|
||||
# the wildcards (0.0.0.0/::) might not be available yet.
|
||||
#
|
||||
#listen_addr = "192.168.0.1"
|
||||
|
||||
|
||||
# Flag toggling mDNS advertizement of the libvirt service.
|
||||
#
|
||||
# Alternatively can disable for all services on a host by
|
||||
# stopping the Avahi daemon
|
||||
#
|
||||
# This is disabled by default, uncomment this to enable it
|
||||
#mdns_adv = 1
|
||||
|
||||
# Override the default mDNS advertizement name. This must be
|
||||
# unique on the immediate broadcast network.
|
||||
#
|
||||
# The default is "Virtualization Host HOSTNAME", where HOSTNAME
|
||||
# is substituted for the short hostname of the machine (without domain)
|
||||
#
|
||||
#mdns_name = "Virtualization Host Joe Demo"
|
||||
|
||||
|
||||
#################################################################
|
||||
#
|
||||
# UNIX socket access controls
|
||||
#
|
||||
|
||||
# Set the UNIX domain socket group ownership. This can be used to
|
||||
# allow a 'trusted' set of users access to management capabilities
|
||||
# without becoming root.
|
||||
#
|
||||
# This is restricted to 'root' by default.
|
||||
#unix_sock_group = "libvirt"
|
||||
|
||||
# Set the UNIX socket permissions for the R/O socket. This is used
|
||||
# for monitoring VM status only
|
||||
#
|
||||
# Default allows any user. If setting group ownership, you may want to
|
||||
# restrict this too.
|
||||
#unix_sock_ro_perms = "0777"
|
||||
|
||||
# Set the UNIX socket permissions for the R/W socket. This is used
|
||||
# for full management of VMs
|
||||
#
|
||||
# Default allows only root. If PolicyKit is enabled on the socket,
|
||||
# the default will change to allow everyone (eg, 0777)
|
||||
#
|
||||
# If not using PolicyKit and setting group ownership for access
|
||||
# control, then you may want to relax this too.
|
||||
#unix_sock_rw_perms = "0770"
|
||||
|
||||
# Set the UNIX socket permissions for the admin interface socket.
|
||||
#
|
||||
# Default allows only owner (root), do not change it unless you are
|
||||
# sure to whom you are exposing the access to.
|
||||
#unix_sock_admin_perms = "0700"
|
||||
|
||||
# Set the name of the directory in which sockets will be found/created.
|
||||
#unix_sock_dir = "/var/run/libvirt"
|
||||
|
||||
|
||||
|
||||
#################################################################
|
||||
#
|
||||
# Authentication.
|
||||
#
|
||||
# - none: do not perform auth checks. If you can connect to the
|
||||
# socket you are allowed. This is suitable if there are
|
||||
# restrictions on connecting to the socket (eg, UNIX
|
||||
# socket permissions), or if there is a lower layer in
|
||||
# the network providing auth (eg, TLS/x509 certificates)
|
||||
#
|
||||
# - sasl: use SASL infrastructure. The actual auth scheme is then
|
||||
# controlled from /etc/sasl2/libvirt.conf. For the TCP
|
||||
# socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
|
||||
# For non-TCP or TLS sockets, any scheme is allowed.
|
||||
#
|
||||
# - polkit: use PolicyKit to authenticate. This is only suitable
|
||||
# for use on the UNIX sockets. The default policy will
|
||||
# require a user to supply their own password to gain
|
||||
# full read/write access (aka sudo like), while anyone
|
||||
# is allowed read/only access.
|
||||
#
|
||||
# Set an authentication scheme for UNIX read-only sockets
|
||||
# By default socket permissions allow anyone to connect
|
||||
#
|
||||
# To restrict monitoring of domains you may wish to enable
|
||||
# an authentication mechanism here
|
||||
#auth_unix_ro = "none"
|
||||
|
||||
# Set an authentication scheme for UNIX read-write sockets
|
||||
# By default socket permissions only allow root. If PolicyKit
|
||||
# support was compiled into libvirt, the default will be to
|
||||
# use 'polkit' auth.
|
||||
#
|
||||
# If the unix_sock_rw_perms are changed you may wish to enable
|
||||
# an authentication mechanism here
|
||||
#auth_unix_rw = "none"
|
||||
|
||||
# Change the authentication scheme for TCP sockets.
|
||||
#
|
||||
# If you don't enable SASL, then all TCP traffic is cleartext.
|
||||
# Don't do this outside of a dev/test scenario. For real world
|
||||
# use, always enable SASL and use the GSSAPI or DIGEST-MD5
|
||||
# mechanism in /etc/sasl2/libvirt.conf
|
||||
auth_tcp = "none"
|
||||
|
||||
# Change the authentication scheme for TLS sockets.
|
||||
#
|
||||
# TLS sockets already have encryption provided by the TLS
|
||||
# layer, and limited authentication is done by certificates
|
||||
#
|
||||
# It is possible to make use of any SASL authentication
|
||||
# mechanism as well, by using 'sasl' for this option
|
||||
#auth_tls = "none"
|
||||
|
||||
|
||||
# Change the API access control scheme
|
||||
#
|
||||
# By default an authenticated user is allowed access
|
||||
# to all APIs. Access drivers can place restrictions
|
||||
# on this. By default the 'nop' driver is enabled,
|
||||
# meaning no access control checks are done once a
|
||||
# client has authenticated with libvirtd
|
||||
#
|
||||
#access_drivers = [ "polkit" ]
|
||||
|
||||
#################################################################
|
||||
#
|
||||
# TLS x509 certificate configuration
|
||||
#
|
||||
|
||||
|
||||
# Override the default server key file path
|
||||
#
|
||||
#key_file = "/etc/pki/libvirt/private/serverkey.pem"
|
||||
|
||||
# Override the default server certificate file path
|
||||
#
|
||||
#cert_file = "/etc/pki/libvirt/servercert.pem"
|
||||
|
||||
# Override the default CA certificate path
|
||||
#
|
||||
#ca_file = "/etc/pki/CA/cacert.pem"
|
||||
|
||||
# Specify a certificate revocation list.
|
||||
#
|
||||
# Defaults to not using a CRL, uncomment to enable it
|
||||
#crl_file = "/etc/pki/CA/crl.pem"
|
||||
|
||||
|
||||
|
||||
#################################################################
|
||||
#
|
||||
# Authorization controls
|
||||
#
|
||||
|
||||
|
||||
# Flag to disable verification of our own server certificates
|
||||
#
|
||||
# When libvirtd starts it performs some sanity checks against
|
||||
# its own certificates.
|
||||
#
|
||||
# Default is to always run sanity checks. Uncommenting this
|
||||
# will disable sanity checks which is not a good idea
|
||||
#tls_no_sanity_certificate = 1
|
||||
|
||||
# Flag to disable verification of client certificates
|
||||
#
|
||||
# Client certificate verification is the primary authentication mechanism.
|
||||
# Any client which does not present a certificate signed by the CA
|
||||
# will be rejected.
|
||||
#
|
||||
# Default is to always verify. Uncommenting this will disable
|
||||
# verification - make sure an IP whitelist is set
|
||||
#tls_no_verify_certificate = 1
|
||||
|
||||
|
||||
# A whitelist of allowed x509 Distinguished Names
|
||||
# This list may contain wildcards such as
|
||||
#
|
||||
# "C=GB,ST=London,L=London,O=Red Hat,CN=*"
|
||||
#
|
||||
# See the POSIX fnmatch function for the format of the wildcards.
|
||||
#
|
||||
# NB If this is an empty list, no client can connect, so comment out
|
||||
# entirely rather than using empty list to disable these checks
|
||||
#
|
||||
# By default, no DN's are checked
|
||||
#tls_allowed_dn_list = ["DN1", "DN2"]
|
||||
|
||||
|
||||
# A whitelist of allowed SASL usernames. The format for username
|
||||
# depends on the SASL authentication mechanism. Kerberos usernames
|
||||
# look like username@REALM
|
||||
#
|
||||
# This list may contain wildcards such as
|
||||
#
|
||||
# "*@EXAMPLE.COM"
|
||||
#
|
||||
# See the POSIX fnmatch function for the format of the wildcards.
|
||||
#
|
||||
# NB If this is an empty list, no client can connect, so comment out
|
||||
# entirely rather than using empty list to disable these checks
|
||||
#
|
||||
# By default, no Username's are checked
|
||||
#sasl_allowed_username_list = ["joe@EXAMPLE.COM", "fred@EXAMPLE.COM" ]
|
||||
|
||||
|
||||
# Override the compile time default TLS priority string. The
|
||||
# default is usually "NORMAL" unless overridden at build time.
|
||||
# Only set this is it is desired for libvirt to deviate from
|
||||
# the global default settings.
|
||||
#
|
||||
#tls_priority="NORMAL"
|
||||
|
||||
|
||||
#################################################################
|
||||
#
|
||||
# Processing controls
|
||||
#
|
||||
|
||||
# The maximum number of concurrent client connections to allow
|
||||
# over all sockets combined.
|
||||
#max_clients = 5000
|
||||
|
||||
# The maximum length of queue of connections waiting to be
|
||||
# accepted by the daemon. Note, that some protocols supporting
|
||||
# retransmission may obey this so that a later reattempt at
|
||||
# connection succeeds.
|
||||
#max_queued_clients = 1000
|
||||
|
||||
# The maximum length of queue of accepted but not yet
|
||||
# authenticated clients. The default value is 20. Set this to
|
||||
# zero to turn this feature off.
|
||||
#max_anonymous_clients = 20
|
||||
|
||||
# The minimum limit sets the number of workers to start up
|
||||
# initially. If the number of active clients exceeds this,
|
||||
# then more threads are spawned, up to max_workers limit.
|
||||
# Typically you'd want max_workers to equal maximum number
|
||||
# of clients allowed
|
||||
#min_workers = 5
|
||||
#max_workers = 20
|
||||
|
||||
|
||||
# The number of priority workers. If all workers from above
|
||||
# pool are stuck, some calls marked as high priority
|
||||
# (notably domainDestroy) can be executed in this pool.
|
||||
#prio_workers = 5
|
||||
|
||||
# Limit on concurrent requests from a single client
|
||||
# connection. To avoid one client monopolizing the server
|
||||
# this should be a small fraction of the global max_workers
|
||||
# parameter.
|
||||
#max_client_requests = 5
|
||||
|
||||
# Same processing controls, but this time for the admin interface.
|
||||
# For description of each option, be so kind to scroll few lines
|
||||
# upwards.
|
||||
|
||||
#admin_min_workers = 1
|
||||
#admin_max_workers = 5
|
||||
#admin_max_clients = 5
|
||||
#admin_max_queued_clients = 5
|
||||
#admin_max_client_requests = 5
|
||||
|
||||
#################################################################
|
||||
#
|
||||
# Logging controls
|
||||
#
|
||||
|
||||
# Logging level: 4 errors, 3 warnings, 2 information, 1 debug
|
||||
# basically 1 will log everything possible
|
||||
# Note: Journald may employ rate limiting of the messages logged
|
||||
# and thus lock up the libvirt daemon. To use the debug level with
|
||||
# journald you have to specify it explicitly in 'log_outputs', otherwise
|
||||
# only information level messages will be logged.
|
||||
#log_level = 3
|
||||
|
||||
# Logging filters:
|
||||
# A filter allows to select a different logging level for a given category
|
||||
# of logs
|
||||
# The format for a filter is one of:
|
||||
# x:name
|
||||
# x:+name
|
||||
|
||||
# where name is a string which is matched against the category
|
||||
# given in the VIR_LOG_INIT() at the top of each libvirt source
|
||||
# file, e.g., "remote", "qemu", or "util.json" (the name in the
|
||||
# filter can be a substring of the full category name, in order
|
||||
# to match multiple similar categories), the optional "+" prefix
|
||||
# tells libvirt to log stack trace for each message matching
|
||||
# name, and x is the minimal level where matching messages should
|
||||
# be logged:
|
||||
|
||||
# 1: DEBUG
|
||||
# 2: INFO
|
||||
# 3: WARNING
|
||||
# 4: ERROR
|
||||
#
|
||||
# Multiple filters can be defined in a single @filters, they just need to be
|
||||
# separated by spaces.
|
||||
#
|
||||
# e.g. to only get warning or errors from the remote layer and only errors
|
||||
# from the event layer:
|
||||
#log_filters="3:remote 4:event"
|
||||
|
||||
# Logging outputs:
|
||||
# An output is one of the places to save logging information
|
||||
# The format for an output can be:
|
||||
# x:stderr
|
||||
# output goes to stderr
|
||||
# x:syslog:name
|
||||
# use syslog for the output and use the given name as the ident
|
||||
# x:file:file_path
|
||||
# output to a file, with the given filepath
|
||||
# x:journald
|
||||
# output to journald logging system
|
||||
# In all case the x prefix is the minimal level, acting as a filter
|
||||
# 1: DEBUG
|
||||
# 2: INFO
|
||||
# 3: WARNING
|
||||
# 4: ERROR
|
||||
#
|
||||
# Multiple outputs can be defined, they just need to be separated by spaces.
|
||||
# e.g. to log all warnings and errors to syslog under the libvirtd ident:
|
||||
#log_outputs="3:syslog:libvirtd"
|
||||
#
|
||||
|
||||
# Log debug buffer size:
|
||||
#
|
||||
# This configuration option is no longer used, since the global
|
||||
# log buffer functionality has been removed. Please configure
|
||||
# suitable log_outputs/log_filters settings to obtain logs.
|
||||
#log_buffer_size = 64
|
||||
|
||||
|
||||
##################################################################
|
||||
#
|
||||
# Auditing
|
||||
#
|
||||
# This setting allows usage of the auditing subsystem to be altered:
|
||||
#
|
||||
# audit_level == 0 -> disable all auditing
|
||||
# audit_level == 1 -> enable auditing, only if enabled on host (default)
|
||||
# audit_level == 2 -> enable auditing, and exit if disabled on host
|
||||
#
|
||||
#audit_level = 2
|
||||
#
|
||||
# If set to 1, then audit messages will also be sent
|
||||
# via libvirt logging infrastructure. Defaults to 0
|
||||
#
|
||||
#audit_logging = 1
|
||||
|
||||
###################################################################
|
||||
# UUID of the host:
|
||||
# Host UUID is read from one of the sources specified in host_uuid_source.
|
||||
#
|
||||
# - 'smbios': fetch the UUID from 'dmidecode -s system-uuid'
|
||||
# - 'machine-id': fetch the UUID from /etc/machine-id
|
||||
#
|
||||
# The host_uuid_source default is 'smbios'. If 'dmidecode' does not provide
|
||||
# a valid UUID a temporary UUID will be generated.
|
||||
#
|
||||
# Another option is to specify host UUID in host_uuid.
|
||||
#
|
||||
# Keep the format of the example UUID below. UUID must not have all digits
|
||||
# be the same.
|
||||
|
||||
# NB This default all-zeros UUID will not work. Replace
|
||||
# it with the output of the 'uuidgen' command and then
|
||||
# uncomment this entry
|
||||
#host_uuid = "00000000-0000-0000-0000-000000000000"
|
||||
#host_uuid_source = "smbios"
|
||||
|
||||
###################################################################
|
||||
# Keepalive protocol:
|
||||
# This allows libvirtd to detect broken client connections or even
|
||||
# dead clients. A keepalive message is sent to a client after
|
||||
# keepalive_interval seconds of inactivity to check if the client is
|
||||
# still responding; keepalive_count is a maximum number of keepalive
|
||||
# messages that are allowed to be sent to the client without getting
|
||||
# any response before the connection is considered broken. In other
|
||||
# words, the connection is automatically closed approximately after
|
||||
# keepalive_interval * (keepalive_count + 1) seconds since the last
|
||||
# message received from the client. If keepalive_interval is set to
|
||||
# -1, libvirtd will never send keepalive requests; however clients
|
||||
# can still send them and the daemon will send responses. When
|
||||
# keepalive_count is set to 0, connections will be automatically
|
||||
# closed after keepalive_interval seconds of inactivity without
|
||||
# sending any keepalive messages.
|
||||
#
|
||||
#keepalive_interval = 5
|
||||
#keepalive_count = 5
|
||||
|
||||
#
|
||||
# These configuration options are no longer used. There is no way to
|
||||
# restrict such clients from connecting since they first need to
|
||||
# connect in order to ask for keepalive.
|
||||
#
|
||||
#keepalive_required = 1
|
||||
#admin_keepalive_required = 1
|
||||
|
||||
# Keepalive settings for the admin interface
|
||||
#admin_keepalive_interval = 5
|
||||
#admin_keepalive_count = 5
|
||||
|
||||
###################################################################
|
||||
# Open vSwitch:
|
||||
# This allows to specify a timeout for openvswitch calls made by
|
||||
# libvirt. The ovs-vsctl utility is used for the configuration and
|
||||
# its timeout option is set by default to 5 seconds to avoid
|
||||
# potential infinite waits blocking libvirt.
|
||||
#
|
||||
#ovs_timeout = 5
|
||||
@@ -0,0 +1,9 @@
|
||||
[DEFAULT]
|
||||
[agent]
|
||||
[linux_bridge]
|
||||
physical_interface_mappings = provider-nat:vlan165
|
||||
[securitygroup]
|
||||
firewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver
|
||||
enable_ipset = true
|
||||
[vxlan]
|
||||
l2_population = true
|
||||
@@ -0,0 +1,21 @@
|
||||
[DEFAULT]
|
||||
[l2pop]
|
||||
[ml2]
|
||||
path_mtu = 9000
|
||||
tenant_network_types = vxlan
|
||||
type_drivers = flat,vlan,vxlan
|
||||
extension_drivers = port_security
|
||||
mechanism_drivers = openvswitch,l2population
|
||||
physical_network_mtus = provider:9000
|
||||
[ml2_type_flat]
|
||||
[ml2_type_geneve]
|
||||
[ml2_type_gre]
|
||||
[ml2_type_vlan]
|
||||
network_vlan_ranges = provider:160:165,212
|
||||
[ml2_type_vxlan]
|
||||
vni_ranges = 65537:69999
|
||||
[securitygroup]
|
||||
enable_security_group = True
|
||||
firewall_driver = ovs_learn_action
|
||||
[agent]
|
||||
extensions = qos
|
||||
@@ -0,0 +1,11 @@
|
||||
TYPE=OVSBond
|
||||
DEVICETYPE=ovs
|
||||
NAME=bond0
|
||||
DEVICE=bond0
|
||||
ONBOOT=yes
|
||||
BOOTPROTO=none
|
||||
OVS_BRIDGE=br-ext-main
|
||||
BOND_IFACES="{{ firstport.stdout }} {{ secondport.stdout }}"
|
||||
OVS_OPTIONS="bond_mode=balance-tcp lacp=active"
|
||||
NOZEROCONF=yes
|
||||
HOTPUG=no
|
||||
@@ -0,0 +1,7 @@
|
||||
DEVICE=br-ext-main
|
||||
DEVICETYPE=ovs
|
||||
TYPE=OVSBridge
|
||||
BOOTPROTO=none
|
||||
OVS_EXTRA="set int $DEVICE mtu_request=9000"
|
||||
ONBOOT=yes
|
||||
HOTPLUG=no
|
||||
@@ -0,0 +1,14 @@
|
||||
TYPE=OVSIntPort
|
||||
DEVICETYPE=ovs
|
||||
DEVICE=mgmt0
|
||||
ONBOOT=yes
|
||||
OVS_BRIDGE=br-ext-main
|
||||
OVS_OPTIONS="tag=161"
|
||||
BOOTPROTO=static
|
||||
IPADDR={{ public_ip.stdout }}
|
||||
DNS1=172.17.1.10
|
||||
GATEWAY=172.17.1.1
|
||||
OVS_EXTRA="set int $DEVICE mtu_request=9000"
|
||||
NOZEROCONF=yes
|
||||
PREFIX=24
|
||||
HOTPLUG="no"
|
||||
@@ -0,0 +1,8 @@
|
||||
DEVICE=patch-main-ext01
|
||||
ONBOOT=yes
|
||||
DEVICETYPE=ovs
|
||||
TYPE=OVSPatchPort
|
||||
OVS_OPTIONS="tag=160"
|
||||
OVS_EXTRA="set int $DEVICE mtu_request=9000"
|
||||
OVS_BRIDGE=br-main
|
||||
OVS_PATCH_PEER=patch-ext01-main
|
||||
@@ -0,0 +1,8 @@
|
||||
DEVICE=patch-main-ext02
|
||||
ONBOOT=yes
|
||||
DEVICETYPE=ovs
|
||||
TYPE=OVSPatchPort
|
||||
OVS_OPTIONS="tag=165"
|
||||
OVS_EXTRA="set int $DEVICE mtu_request=9000"
|
||||
OVS_BRIDGE=br-main
|
||||
OVS_PATCH_PEER=patch-ext02-main
|
||||
@@ -0,0 +1,7 @@
|
||||
DEVICE=patch-main-slave
|
||||
ONBOOT=yes
|
||||
DEVICETYPE=ovs
|
||||
TYPE=OVSPatchPort
|
||||
OVS_EXTRA="set int $DEVICE mtu_request=9000"
|
||||
OVS_BRIDGE=br-ext-main
|
||||
OVS_PATCH_PEER=patch-slave-main
|
||||
@@ -0,0 +1,5 @@
|
||||
TYPE=Ethernet
|
||||
DEVICE={{ firstport.stdout }}
|
||||
ONBOOT=yes
|
||||
MTU=9000
|
||||
ETHTOOL_OPTS="-K ${DEVICE} rx off tx off; -K ${DEVICE} tso off; -K ${DEVICE} gso off"
|
||||
@@ -0,0 +1,5 @@
|
||||
TYPE=Ethernet
|
||||
DEVICE={{ secondport.stdout }}
|
||||
ONBOOT=yes
|
||||
MTU=9000
|
||||
ETHTOOL_OPTS="-K ${DEVICE} rx off tx off; -K ${DEVICE} tso off; -K ${DEVICE} gso off"
|
||||
@@ -0,0 +1,12 @@
|
||||
TYPE=OVSIntPort
|
||||
DEVICETYPE=ovs
|
||||
DEVICE=port-int
|
||||
ONBOOT=yes
|
||||
OVS_BRIDGE=br-ext-main
|
||||
OVS_OPTIONS="tag=162"
|
||||
BOOTPROTO=static
|
||||
OVS_EXTRA="set int $DEVICE mtu_request=9000"
|
||||
IPADDR={{ private_ip.stdout }}
|
||||
NOZEROCONF=yes
|
||||
PREFIX=24
|
||||
HOTPLUG="no"
|
||||
@@ -0,0 +1,12 @@
|
||||
TYPE=OVSIntPort
|
||||
DEVICETYPE=ovs
|
||||
DEVICE=port-tun
|
||||
ONBOOT=yes
|
||||
OVS_BRIDGE=br-dpdk
|
||||
OVS_OPTIONS="tag=163"
|
||||
BOOTPROTO=static
|
||||
OVS_EXTRA="set int $DEVICE mtu_request=9000"
|
||||
IPADDR={{ tun_ip.stdout }}
|
||||
NOZEROCONF=yes
|
||||
PREFIX=24
|
||||
HOTPLUG="no"
|
||||
@@ -0,0 +1,29 @@
|
||||
[DEFAULT]
|
||||
auth_strategy = keystone
|
||||
transport_url = rabbit://openstack:GAQ5q55LTj9D@controller-virt
|
||||
[agent]
|
||||
[cors]
|
||||
[database]
|
||||
[keystone_authtoken]
|
||||
auth_uri = http://controller-virt:5000
|
||||
auth_url = http://controller-virt:35357
|
||||
memcached_servers = controller-virt:11211
|
||||
auth_type = password
|
||||
project_domain_name = Default
|
||||
user_domain_name = Default
|
||||
project_name = service
|
||||
username = neutron
|
||||
password = 9hEFkAtYY
|
||||
[matchmaker_redis]
|
||||
[nova]
|
||||
[oslo_concurrency]
|
||||
lock_path = /var/lib/neutron/tmp
|
||||
[oslo_messaging_amqp]
|
||||
[oslo_messaging_kafka]
|
||||
[oslo_messaging_notifications]
|
||||
[oslo_messaging_rabbit]
|
||||
[oslo_messaging_zmq]
|
||||
[oslo_middleware]
|
||||
[oslo_policy]
|
||||
[quotas]
|
||||
[ssl]
|
||||
@@ -0,0 +1,111 @@
|
||||
[DEFAULT]
|
||||
my_ip={{ public_ip.stdout }}
|
||||
use_neutron=true
|
||||
firewall_driver = nova.virt.firewall.NoopFirewallDriver
|
||||
enabled_apis=osapi_compute,metadata
|
||||
transport_url = rabbit://openstack:GAQ5q55LTj9D@controller-virt
|
||||
force_raw_images = True
|
||||
security_group_api = neutron
|
||||
instance_usage_audit = True
|
||||
instance_usage_audit_period = hour
|
||||
notify_on_state_change = vm_and_task_state
|
||||
compute_monitors = cpu.virt_driver, numa_mem_bw.virt_driver
|
||||
[api]
|
||||
auth_strategy=keystone
|
||||
[api_database]
|
||||
[barbican]
|
||||
[cache]
|
||||
[cells]
|
||||
[cinder]
|
||||
os_region_name = RegionOne
|
||||
[compute]
|
||||
[conductor]
|
||||
[console]
|
||||
[consoleauth]
|
||||
[cors]
|
||||
[crypto]
|
||||
[database]
|
||||
[ephemeral_storage_encryption]
|
||||
[filter_scheduler]
|
||||
[glance]
|
||||
api_servers = http://controller-ceph:9292
|
||||
[guestfs]
|
||||
[healthcheck]
|
||||
[hyperv]
|
||||
[ironic]
|
||||
[key_manager]
|
||||
[keystone]
|
||||
[keystone_authtoken]
|
||||
auth_url = http://controller-virt:5000
|
||||
auth_url = http://controller-virt:35357
|
||||
memcached_servers = controller-virt:11211
|
||||
auth_type = password
|
||||
project_domain_name = Default
|
||||
user_domain_name = Default
|
||||
project_name = service
|
||||
username = nova
|
||||
password = AFdhNTV4Pj
|
||||
[libvirt]
|
||||
virt_type=kvm
|
||||
images_type = rbd
|
||||
images_rbd_pool = vms
|
||||
images_rbd_ceph_conf = /etc/ceph/ceph.conf
|
||||
rbd_user = vms
|
||||
rbd_secret_uuid = 565f7a01-3486-4a62-85bf-fbcc8490d7ca
|
||||
disk_cachemodes = writeback
|
||||
[matchmaker_redis]
|
||||
[metrics]
|
||||
[mks]
|
||||
[neutron]
|
||||
url = http://controller-net:9696
|
||||
auth_url = http://controller-virt:35357
|
||||
auth_type = password
|
||||
project_domain_name = Default
|
||||
user_domain_name = Default
|
||||
region_name = RegionOne
|
||||
project_name = service
|
||||
username = neutron
|
||||
password = 9hEFkAtYYa
|
||||
[notifications]
|
||||
notify_on_state_change = vm_and_task_state
|
||||
[osapi_v21]
|
||||
[oslo_concurrency]
|
||||
lock_path=/var/lib/nova/tmp
|
||||
[oslo_messaging_amqp]
|
||||
[oslo_messaging_kafka]
|
||||
[oslo_messaging_notifications]
|
||||
driver = messagingv2
|
||||
[oslo_messaging_rabbit]
|
||||
[oslo_messaging_zmq]
|
||||
[oslo_middleware]
|
||||
[oslo_policy]
|
||||
[pci]
|
||||
[placement]
|
||||
os_region_name = RegionOne
|
||||
project_domain_name = Default
|
||||
project_name = service
|
||||
auth_type = password
|
||||
user_domain_name = Default
|
||||
auth_url = http://controller-virt:35357/v3
|
||||
username = placement
|
||||
password = jxjuhBKRQ9
|
||||
[quota]
|
||||
[rdp]
|
||||
[remote_debug]
|
||||
[scheduler]
|
||||
[serial_console]
|
||||
[service_user]
|
||||
[spice]
|
||||
[trusted_computing]
|
||||
[upgrade_levels]
|
||||
[vendordata_dynamic_auth]
|
||||
[vmware]
|
||||
[vnc]
|
||||
enabled = True
|
||||
vncserver_listen = 0.0.0.0
|
||||
vncserver_proxyclient_address = $my_ip
|
||||
novncproxy_base_url = http://controller-virt:6080/vnc_auto.html
|
||||
[workarounds]
|
||||
[wsgi]
|
||||
[xenserver]
|
||||
[xvp]
|
||||
@@ -0,0 +1,11 @@
|
||||
[DEFAULT]
|
||||
[agent]
|
||||
tunnel_types = vxlan
|
||||
l2_population = true
|
||||
arp_responder = True
|
||||
[ovs]
|
||||
local_ip = {{ tunnel_ip.stdout }}
|
||||
bridge_mappings = provider:br-ext-main
|
||||
[securitygroup]
|
||||
firewall_driver = openvswitch
|
||||
[xenapi]
|
||||
@@ -0,0 +1,6 @@
|
||||
<secret ephemeral='no' private='no'>
|
||||
<uuid>da3a1f59-cb17-4259-9351-0b30cc54d778</uuid>
|
||||
<usage type='ceph'>
|
||||
<name>client.cinder secret</name>
|
||||
</usage>
|
||||
</secret>
|
||||
@@ -0,0 +1,464 @@
|
||||
###############################################################################
|
||||
#
|
||||
# snmpd.conf:
|
||||
# An example configuration file for configuring the ucd-snmp snmpd agent.
|
||||
#
|
||||
###############################################################################
|
||||
#
|
||||
# This file is intended to only be as a starting point. Many more
|
||||
# configuration directives exist than are mentioned in this file. For
|
||||
# full details, see the snmpd.conf(5) manual page.
|
||||
#
|
||||
# All lines beginning with a '#' are comments and are intended for you
|
||||
# to read. All other lines are configuration commands for the agent.
|
||||
|
||||
###############################################################################
|
||||
# Access Control
|
||||
###############################################################################
|
||||
|
||||
# As shipped, the snmpd demon will only respond to queries on the
|
||||
# system mib group until this file is replaced or modified for
|
||||
# security purposes. Examples are shown below about how to increase the
|
||||
# level of access.
|
||||
|
||||
# By far, the most common question I get about the agent is "why won't
|
||||
# it work?", when really it should be "how do I configure the agent to
|
||||
# allow me to access it?"
|
||||
#
|
||||
# By default, the agent responds to the "public" community for read
|
||||
# only access, if run out of the box without any configuration file in
|
||||
# place. The following examples show you other ways of configuring
|
||||
# the agent so that you can change the community names, and give
|
||||
# yourself write access to the mib tree as well.
|
||||
#
|
||||
# For more information, read the FAQ as well as the snmpd.conf(5)
|
||||
# manual page.
|
||||
|
||||
####
|
||||
# First, map the community name "public" into a "security name"
|
||||
|
||||
# sec.name source community
|
||||
com2sec notConfigUser default public
|
||||
|
||||
####
|
||||
# Second, map the security name into a group name:
|
||||
|
||||
# groupName securityModel securityName
|
||||
group notConfigGroup v1 notConfigUser
|
||||
group notConfigGroup v2c notConfigUser
|
||||
|
||||
####
|
||||
# Third, create a view for us to let the group have rights to:
|
||||
|
||||
# Make at least snmpwalk -v 1 localhost -c public system fast again.
|
||||
# name incl/excl subtree mask(optional)
|
||||
view systemview included .1.3.6.1.2.1
|
||||
view systemview included .1.3.6.1.4.1.2021
|
||||
view systemview included .1.3.6.1.2.1.1
|
||||
view systemview included .1.3.6.1.2.1.25.1.1
|
||||
|
||||
####
|
||||
# Finally, grant the group read-only access to the systemview view.
|
||||
|
||||
# group context sec.model sec.level prefix read write notif
|
||||
access notConfigGroup "" any noauth exact systemview none none
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
# Here is a commented out example configuration that allows less
|
||||
# restrictive access.
|
||||
|
||||
# YOU SHOULD CHANGE THE "COMMUNITY" TOKEN BELOW TO A NEW KEYWORD ONLY
|
||||
# KNOWN AT YOUR SITE. YOU *MUST* CHANGE THE NETWORK TOKEN BELOW TO
|
||||
# SOMETHING REFLECTING YOUR LOCAL NETWORK ADDRESS SPACE.
|
||||
|
||||
## sec.name source community
|
||||
#com2sec local localhost COMMUNITY
|
||||
#com2sec mynetwork NETWORK/24 COMMUNITY
|
||||
|
||||
## group.name sec.model sec.name
|
||||
#group MyRWGroup any local
|
||||
#group MyROGroup any mynetwork
|
||||
#
|
||||
#group MyRWGroup any otherv3user
|
||||
#...
|
||||
|
||||
## incl/excl subtree mask
|
||||
#view all included .1 80
|
||||
|
||||
## -or just the mib2 tree-
|
||||
|
||||
#view mib2 included .iso.org.dod.internet.mgmt.mib-2 fc
|
||||
|
||||
|
||||
## context sec.model sec.level prefix read write notif
|
||||
#access MyROGroup "" any noauth 0 all none none
|
||||
#access MyRWGroup "" any noauth 0 all all all
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Sample configuration to make net-snmpd RFC 1213.
|
||||
# Unfortunately v1 and v2c don't allow any user based authentification, so
|
||||
# opening up the default config is not an option from a security point.
|
||||
#
|
||||
# WARNING: If you uncomment the following lines you allow write access to your
|
||||
# snmpd daemon from any source! To avoid this use different names for your
|
||||
# community or split out the write access to a different community and
|
||||
# restrict it to your local network.
|
||||
# Also remember to comment the syslocation and syscontact parameters later as
|
||||
# otherwise they are still read only (see FAQ for net-snmp).
|
||||
#
|
||||
|
||||
# First, map the community name "public" into a "security name"
|
||||
# sec.name source community
|
||||
#com2sec notConfigUser default public
|
||||
|
||||
# Second, map the security name into a group name:
|
||||
# groupName securityModel securityName
|
||||
#group notConfigGroup v1 notConfigUser
|
||||
#group notConfigGroup v2c notConfigUser
|
||||
|
||||
# Third, create a view for us to let the group have rights to:
|
||||
# Open up the whole tree for ro, make the RFC 1213 required ones rw.
|
||||
# name incl/excl subtree mask(optional)
|
||||
#view roview included .1
|
||||
#view rwview included system.sysContact
|
||||
#view rwview included system.sysName
|
||||
#view rwview included system.sysLocation
|
||||
#view rwview included interfaces.ifTable.ifEntry.ifAdminStatus
|
||||
#view rwview included at.atTable.atEntry.atPhysAddress
|
||||
#view rwview included at.atTable.atEntry.atNetAddress
|
||||
#view rwview included ip.ipForwarding
|
||||
#view rwview included ip.ipDefaultTTL
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteDest
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteIfIndex
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric1
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric2
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric3
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric4
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteType
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteAge
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMask
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric5
|
||||
#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaIfIndex
|
||||
#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaPhysAddress
|
||||
#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaNetAddress
|
||||
#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaType
|
||||
#view rwview included tcp.tcpConnTable.tcpConnEntry.tcpConnState
|
||||
#view rwview included egp.egpNeighTable.egpNeighEntry.egpNeighEventTrigger
|
||||
#view rwview included snmp.snmpEnableAuthenTraps
|
||||
|
||||
# Finally, grant the group read-only access to the systemview view.
|
||||
# group context sec.model sec.level prefix read write notif
|
||||
#access notConfigGroup "" any noauth exact roview rwview none
|
||||
|
||||
|
||||
|
||||
###############################################################################
|
||||
# System contact information
|
||||
#
|
||||
|
||||
# It is also possible to set the sysContact and sysLocation system
|
||||
# variables through the snmpd.conf file:
|
||||
|
||||
syslocation Unknown (edit /etc/snmp/snmpd.conf)
|
||||
syscontact Root <root@localhost> (configure /etc/snmp/snmp.local.conf)
|
||||
|
||||
# Example output of snmpwalk:
|
||||
# % snmpwalk -v 1 localhost -c public system
|
||||
# system.sysDescr.0 = "SunOS name sun4c"
|
||||
# system.sysObjectID.0 = OID: enterprises.ucdavis.ucdSnmpAgent.sunos4
|
||||
# system.sysUpTime.0 = Timeticks: (595637548) 68 days, 22:32:55
|
||||
# system.sysContact.0 = "Me <me@somewhere.org>"
|
||||
# system.sysName.0 = "name"
|
||||
# system.sysLocation.0 = "Right here, right now."
|
||||
# system.sysServices.0 = 72
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Logging
|
||||
#
|
||||
|
||||
# We do not want annoying "Connection from UDP: " messages in syslog.
|
||||
# If the following option is commented out, snmpd will print each incoming
|
||||
# connection, which can be useful for debugging.
|
||||
|
||||
dontLogTCPWrappersConnects yes
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Process checks.
|
||||
#
|
||||
# The following are examples of how to use the agent to check for
|
||||
# processes running on the host. The syntax looks something like:
|
||||
#
|
||||
# proc NAME [MAX=0] [MIN=0]
|
||||
#
|
||||
# NAME: the name of the process to check for. It must match
|
||||
# exactly (ie, http will not find httpd processes).
|
||||
# MAX: the maximum number allowed to be running. Defaults to 0.
|
||||
# MIN: the minimum number to be running. Defaults to 0.
|
||||
|
||||
#
|
||||
# Examples (commented out by default):
|
||||
#
|
||||
|
||||
# Make sure mountd is running
|
||||
#proc mountd
|
||||
|
||||
# Make sure there are no more than 4 ntalkds running, but 0 is ok too.
|
||||
#proc ntalkd 4
|
||||
|
||||
# Make sure at least one sendmail, but less than or equal to 10 are running.
|
||||
#proc sendmail 10 1
|
||||
|
||||
# A snmpwalk of the process mib tree would look something like this:
|
||||
#
|
||||
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.2
|
||||
# enterprises.ucdavis.procTable.prEntry.prIndex.1 = 1
|
||||
# enterprises.ucdavis.procTable.prEntry.prIndex.2 = 2
|
||||
# enterprises.ucdavis.procTable.prEntry.prIndex.3 = 3
|
||||
# enterprises.ucdavis.procTable.prEntry.prNames.1 = "mountd"
|
||||
# enterprises.ucdavis.procTable.prEntry.prNames.2 = "ntalkd"
|
||||
# enterprises.ucdavis.procTable.prEntry.prNames.3 = "sendmail"
|
||||
# enterprises.ucdavis.procTable.prEntry.prMin.1 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prMin.2 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prMin.3 = 1
|
||||
# enterprises.ucdavis.procTable.prEntry.prMax.1 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prMax.2 = 4
|
||||
# enterprises.ucdavis.procTable.prEntry.prMax.3 = 10
|
||||
# enterprises.ucdavis.procTable.prEntry.prCount.1 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prCount.2 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prCount.3 = 1
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.1 = 1
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.2 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.3 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrMessage.1 = "No mountd process running."
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrMessage.2 = ""
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrMessage.3 = ""
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrFix.1 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrFix.2 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrFix.3 = 0
|
||||
#
|
||||
# Note that the errorFlag for mountd is set to 1 because one is not
|
||||
# running (in this case an rpc.mountd is, but thats not good enough),
|
||||
# and the ErrMessage tells you what's wrong. The configuration
|
||||
# imposed in the snmpd.conf file is also shown.
|
||||
#
|
||||
# Special Case: When the min and max numbers are both 0, it assumes
|
||||
# you want a max of infinity and a min of 1.
|
||||
#
|
||||
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Executables/scripts
|
||||
#
|
||||
|
||||
#
|
||||
# You can also have programs run by the agent that return a single
|
||||
# line of output and an exit code. Here are two examples.
|
||||
#
|
||||
# exec NAME PROGRAM [ARGS ...]
|
||||
#
|
||||
# NAME: A generic name. The name must be unique for each exec statement.
|
||||
# PROGRAM: The program to run. Include the path!
|
||||
# ARGS: optional arguments to be passed to the program
|
||||
|
||||
# a simple hello world
|
||||
|
||||
#exec echotest /bin/echo hello world
|
||||
|
||||
# Run a shell script containing:
|
||||
#
|
||||
# #!/bin/sh
|
||||
# echo hello world
|
||||
# echo hi there
|
||||
# exit 35
|
||||
#
|
||||
# Note: this has been specifically commented out to prevent
|
||||
# accidental security holes due to someone else on your system writing
|
||||
# a /tmp/shtest before you do. Uncomment to use it.
|
||||
#
|
||||
#exec shelltest /bin/sh /tmp/shtest
|
||||
|
||||
# Then,
|
||||
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.8
|
||||
# enterprises.ucdavis.extTable.extEntry.extIndex.1 = 1
|
||||
# enterprises.ucdavis.extTable.extEntry.extIndex.2 = 2
|
||||
# enterprises.ucdavis.extTable.extEntry.extNames.1 = "echotest"
|
||||
# enterprises.ucdavis.extTable.extEntry.extNames.2 = "shelltest"
|
||||
# enterprises.ucdavis.extTable.extEntry.extCommand.1 = "/bin/echo hello world"
|
||||
# enterprises.ucdavis.extTable.extEntry.extCommand.2 = "/bin/sh /tmp/shtest"
|
||||
# enterprises.ucdavis.extTable.extEntry.extResult.1 = 0
|
||||
# enterprises.ucdavis.extTable.extEntry.extResult.2 = 35
|
||||
# enterprises.ucdavis.extTable.extEntry.extOutput.1 = "hello world."
|
||||
# enterprises.ucdavis.extTable.extEntry.extOutput.2 = "hello world."
|
||||
# enterprises.ucdavis.extTable.extEntry.extErrFix.1 = 0
|
||||
# enterprises.ucdavis.extTable.extEntry.extErrFix.2 = 0
|
||||
|
||||
# Note that the second line of the /tmp/shtest shell script is cut
|
||||
# off. Also note that the exit status of 35 was returned.
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
|
||||
###############################################################################
|
||||
# disk checks
|
||||
#
|
||||
|
||||
# The agent can check the amount of available disk space, and make
|
||||
# sure it is above a set limit.
|
||||
|
||||
# disk PATH [MIN=100000]
|
||||
#
|
||||
# PATH: mount path to the disk in question.
|
||||
# MIN: Disks with space below this value will have the Mib's errorFlag set.
|
||||
# Default value = 100000.
|
||||
|
||||
# Check the / partition and make sure it contains at least 10 megs.
|
||||
|
||||
#disk / 10000
|
||||
|
||||
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.9
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskIndex.1 = 0
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskPath.1 = "/" Hex: 2F
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskDevice.1 = "/dev/dsk/c201d6s0"
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskMinimum.1 = 10000
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskTotal.1 = 837130
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskAvail.1 = 316325
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskUsed.1 = 437092
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskPercent.1 = 58
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskErrorFlag.1 = 0
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskErrorMsg.1 = ""
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
|
||||
###############################################################################
|
||||
# load average checks
|
||||
#
|
||||
|
||||
# load [1MAX=12.0] [5MAX=12.0] [15MAX=12.0]
|
||||
#
|
||||
# 1MAX: If the 1 minute load average is above this limit at query
|
||||
# time, the errorFlag will be set.
|
||||
# 5MAX: Similar, but for 5 min average.
|
||||
# 15MAX: Similar, but for 15 min average.
|
||||
|
||||
# Check for loads:
|
||||
#load 12 14 14
|
||||
|
||||
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.10
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.1 = 1
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.2 = 2
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.3 = 3
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.1 = "Load-1"
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.2 = "Load-5"
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.3 = "Load-15"
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.1 = "0.49" Hex: 30 2E 34 39
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.2 = "0.31" Hex: 30 2E 33 31
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.3 = "0.26" Hex: 30 2E 32 36
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.1 = "12.00"
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.2 = "14.00"
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.3 = "14.00"
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.1 = 0
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.2 = 0
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.3 = 0
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.1 = ""
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.2 = ""
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.3 = ""
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Extensible sections.
|
||||
#
|
||||
|
||||
# This alleviates the multiple line output problem found in the
|
||||
# previous executable mib by placing each mib in its own mib table:
|
||||
|
||||
# Run a shell script containing:
|
||||
#
|
||||
# #!/bin/sh
|
||||
# echo hello world
|
||||
# echo hi there
|
||||
# exit 35
|
||||
#
|
||||
# Note: this has been specifically commented out to prevent
|
||||
# accidental security holes due to someone else on your system writing
|
||||
# a /tmp/shtest before you do. Uncomment to use it.
|
||||
#
|
||||
# exec .1.3.6.1.4.1.2021.50 shelltest /bin/sh /tmp/shtest
|
||||
|
||||
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.50
|
||||
# enterprises.ucdavis.50.1.1 = 1
|
||||
# enterprises.ucdavis.50.2.1 = "shelltest"
|
||||
# enterprises.ucdavis.50.3.1 = "/bin/sh /tmp/shtest"
|
||||
# enterprises.ucdavis.50.100.1 = 35
|
||||
# enterprises.ucdavis.50.101.1 = "hello world."
|
||||
# enterprises.ucdavis.50.101.2 = "hi there."
|
||||
# enterprises.ucdavis.50.102.1 = 0
|
||||
|
||||
# Now the Output has grown to two lines, and we can see the 'hi
|
||||
# there.' output as the second line from our shell script.
|
||||
#
|
||||
# Note that you must alter the mib.txt file to be correct if you want
|
||||
# the .50.* outputs above to change to reasonable text descriptions.
|
||||
|
||||
# Other ideas:
|
||||
#
|
||||
# exec .1.3.6.1.4.1.2021.51 ps /bin/ps
|
||||
# exec .1.3.6.1.4.1.2021.52 top /usr/local/bin/top
|
||||
# exec .1.3.6.1.4.1.2021.53 mailq /usr/bin/mailq
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Pass through control.
|
||||
#
|
||||
|
||||
# Usage:
|
||||
# pass MIBOID EXEC-COMMAND
|
||||
#
|
||||
# This will pass total control of the mib underneath the MIBOID
|
||||
# portion of the mib to the EXEC-COMMAND.
|
||||
#
|
||||
# Note: You'll have to change the path of the passtest script to your
|
||||
# source directory or install it in the given location.
|
||||
#
|
||||
# Example: (see the script for details)
|
||||
# (commented out here since it requires that you place the
|
||||
# script in the right location. (its not installed by default))
|
||||
|
||||
# pass .1.3.6.1.4.1.2021.255 /bin/sh /usr/local/local/passtest
|
||||
|
||||
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.255
|
||||
# enterprises.ucdavis.255.1 = "life the universe and everything"
|
||||
# enterprises.ucdavis.255.2.1 = 42
|
||||
# enterprises.ucdavis.255.2.2 = OID: 42.42.42
|
||||
# enterprises.ucdavis.255.3 = Timeticks: (363136200) 42 days, 0:42:42
|
||||
# enterprises.ucdavis.255.4 = IpAddress: 127.0.0.1
|
||||
# enterprises.ucdavis.255.5 = 42
|
||||
# enterprises.ucdavis.255.6 = Gauge: 42
|
||||
#
|
||||
# % snmpget -v 1 localhost public .1.3.6.1.4.1.2021.255.5
|
||||
# enterprises.ucdavis.255.5 = 42
|
||||
#
|
||||
# % snmpset -v 1 localhost public .1.3.6.1.4.1.2021.255.1 s "New string"
|
||||
# enterprises.ucdavis.255.1 = "New string"
|
||||
#
|
||||
|
||||
# For specific usage information, see the man/snmpd.conf.5 manual page
|
||||
# as well as the local/passtest script used in the above example.
|
||||
|
||||
###############################################################################
|
||||
# Further Information
|
||||
#
|
||||
# See the snmpd.conf manual page, and the output of "snmpd -H".
|
||||
@@ -0,0 +1,484 @@
|
||||
###############################################################################
|
||||
#
|
||||
# snmpd.conf:
|
||||
# An example configuration file for configuring the ucd-snmp snmpd agent.
|
||||
#
|
||||
###############################################################################
|
||||
#
|
||||
# This file is intended to only be as a starting point. Many more
|
||||
# configuration directives exist than are mentioned in this file. For
|
||||
# full details, see the snmpd.conf(5) manual page.
|
||||
#
|
||||
# All lines beginning with a '#' are comments and are intended for you
|
||||
# to read. All other lines are configuration commands for the agent.
|
||||
|
||||
###############################################################################
|
||||
# Access Control
|
||||
###############################################################################
|
||||
|
||||
# As shipped, the snmpd demon will only respond to queries on the
|
||||
# system mib group until this file is replaced or modified for
|
||||
# security purposes. Examples are shown below about how to increase the
|
||||
# level of access.
|
||||
|
||||
# By far, the most common question I get about the agent is "why won't
|
||||
# it work?", when really it should be "how do I configure the agent to
|
||||
# allow me to access it?"
|
||||
#
|
||||
# By default, the agent responds to the "public" community for read
|
||||
# only access, if run out of the box without any configuration file in
|
||||
# place. The following examples show you other ways of configuring
|
||||
# the agent so that you can change the community names, and give
|
||||
# yourself write access to the mib tree as well.
|
||||
#
|
||||
# For more information, read the FAQ as well as the snmpd.conf(5)
|
||||
# manual page.
|
||||
|
||||
####
|
||||
# First, map the community name "public" into a "security name"
|
||||
|
||||
# sec.name source community
|
||||
com2sec notConfigUser default public
|
||||
|
||||
####
|
||||
# Second, map the security name into a group name:
|
||||
|
||||
# groupName securityModel securityName
|
||||
group notConfigGroup v1 notConfigUser
|
||||
group notConfigGroup v2c notConfigUser
|
||||
|
||||
####
|
||||
# Third, create a view for us to let the group have rights to:
|
||||
|
||||
# Make at least snmpwalk -v 1 localhost -c public system fast again.
|
||||
# name incl/excl subtree mask(optional)
|
||||
#view systemview included .1.3.6.1.2.1
|
||||
#view systemview included .1.3.6.1.4.1.2021
|
||||
|
||||
view systemview included .1.3.6.1.4.1.2021.10.1.3.1
|
||||
view systemview included .1.3.6.1.4.1.2021.10.1.3.2
|
||||
view systemview included .1.3.6.1.4.1.2021.10.1.3.3
|
||||
view systemview included .1.3.6.1.4.1.2021.11.9.0
|
||||
view systemview included .1.3.6.1.4.1.2021.4.5.0
|
||||
view systemview included .1.3.6.1.4.1.2021.4.6.0
|
||||
view systemview included .1.3.6.1.4.1.2021.4.3.0
|
||||
view systemview included .1.3.6.1.4.1.2021.4.4.0
|
||||
view systemview included .1.3.6.1.4.1.2021.4.14.0
|
||||
view systemview included .1.3.6.1.4.1.2021.4.15.0
|
||||
view systemview included .1.3.6.1.2.1.2.2.1.10
|
||||
view systemview included .1.3.6.1.2.1.2.2.1.2
|
||||
view systemview included .1.3.6.1.2.1.2.2.1.5
|
||||
view systemview included .1.3.6.1.2.1.2.2.1.6
|
||||
view systemview included .1.3.6.1.2.1.2.2.1.16
|
||||
view systemview included .1.3.6.1.2.1.2.2.1.20
|
||||
view systemview included .1.3.6.1.2.1.4.10.0
|
||||
view systemview included .1.3.6.1.2.1.4.3.0
|
||||
view systemview included .1.3.6.1.4.1.2021.11.11.0
|
||||
view systemview included .1.3.6.1.2.1.1
|
||||
view systemview included .1.3.6.1.2.1.25.1.1
|
||||
|
||||
####
|
||||
# Finally, grant the group read-only access to the systemview view.
|
||||
|
||||
# group context sec.model sec.level prefix read write notif
|
||||
access notConfigGroup "" any noauth exact systemview none none
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
# Here is a commented out example configuration that allows less
|
||||
# restrictive access.
|
||||
|
||||
# YOU SHOULD CHANGE THE "COMMUNITY" TOKEN BELOW TO A NEW KEYWORD ONLY
|
||||
# KNOWN AT YOUR SITE. YOU *MUST* CHANGE THE NETWORK TOKEN BELOW TO
|
||||
# SOMETHING REFLECTING YOUR LOCAL NETWORK ADDRESS SPACE.
|
||||
|
||||
## sec.name source community
|
||||
#com2sec local localhost COMMUNITY
|
||||
#com2sec mynetwork NETWORK/24 COMMUNITY
|
||||
|
||||
## group.name sec.model sec.name
|
||||
#group MyRWGroup any local
|
||||
#group MyROGroup any mynetwork
|
||||
#
|
||||
#group MyRWGroup any otherv3user
|
||||
#...
|
||||
|
||||
## incl/excl subtree mask
|
||||
#view all included .1 80
|
||||
|
||||
## -or just the mib2 tree-
|
||||
|
||||
#view mib2 included .iso.org.dod.internet.mgmt.mib-2 fc
|
||||
|
||||
|
||||
## context sec.model sec.level prefix read write notif
|
||||
#access MyROGroup "" any noauth 0 all none none
|
||||
#access MyRWGroup "" any noauth 0 all all all
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Sample configuration to make net-snmpd RFC 1213.
|
||||
# Unfortunately v1 and v2c don't allow any user based authentification, so
|
||||
# opening up the default config is not an option from a security point.
|
||||
#
|
||||
# WARNING: If you uncomment the following lines you allow write access to your
|
||||
# snmpd daemon from any source! To avoid this use different names for your
|
||||
# community or split out the write access to a different community and
|
||||
# restrict it to your local network.
|
||||
# Also remember to comment the syslocation and syscontact parameters later as
|
||||
# otherwise they are still read only (see FAQ for net-snmp).
|
||||
#
|
||||
|
||||
# First, map the community name "public" into a "security name"
|
||||
# sec.name source community
|
||||
#com2sec notConfigUser default public
|
||||
|
||||
# Second, map the security name into a group name:
|
||||
# groupName securityModel securityName
|
||||
#group notConfigGroup v1 notConfigUser
|
||||
#group notConfigGroup v2c notConfigUser
|
||||
|
||||
# Third, create a view for us to let the group have rights to:
|
||||
# Open up the whole tree for ro, make the RFC 1213 required ones rw.
|
||||
# name incl/excl subtree mask(optional)
|
||||
#view roview included .1
|
||||
#view rwview included system.sysContact
|
||||
#view rwview included system.sysName
|
||||
#view rwview included system.sysLocation
|
||||
#view rwview included interfaces.ifTable.ifEntry.ifAdminStatus
|
||||
#view rwview included at.atTable.atEntry.atPhysAddress
|
||||
#view rwview included at.atTable.atEntry.atNetAddress
|
||||
#view rwview included ip.ipForwarding
|
||||
#view rwview included ip.ipDefaultTTL
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteDest
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteIfIndex
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric1
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric2
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric3
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric4
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteType
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteAge
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMask
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric5
|
||||
#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaIfIndex
|
||||
#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaPhysAddress
|
||||
#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaNetAddress
|
||||
#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaType
|
||||
#view rwview included tcp.tcpConnTable.tcpConnEntry.tcpConnState
|
||||
#view rwview included egp.egpNeighTable.egpNeighEntry.egpNeighEventTrigger
|
||||
#view rwview included snmp.snmpEnableAuthenTraps
|
||||
|
||||
# Finally, grant the group read-only access to the systemview view.
|
||||
# group context sec.model sec.level prefix read write notif
|
||||
#access notConfigGroup "" any noauth exact roview rwview none
|
||||
|
||||
|
||||
|
||||
###############################################################################
|
||||
# System contact information
|
||||
#
|
||||
|
||||
# It is also possible to set the sysContact and sysLocation system
|
||||
# variables through the snmpd.conf file:
|
||||
|
||||
syslocation Unknown (edit /etc/snmp/snmpd.conf)
|
||||
syscontact Root <root@localhost> (configure /etc/snmp/snmp.local.conf)
|
||||
|
||||
# Example output of snmpwalk:
|
||||
# % snmpwalk -v 1 localhost -c public system
|
||||
# system.sysDescr.0 = "SunOS name sun4c"
|
||||
# system.sysObjectID.0 = OID: enterprises.ucdavis.ucdSnmpAgent.sunos4
|
||||
# system.sysUpTime.0 = Timeticks: (595637548) 68 days, 22:32:55
|
||||
# system.sysContact.0 = "Me <me@somewhere.org>"
|
||||
# system.sysName.0 = "name"
|
||||
# system.sysLocation.0 = "Right here, right now."
|
||||
# system.sysServices.0 = 72
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Logging
|
||||
#
|
||||
|
||||
# We do not want annoying "Connection from UDP: " messages in syslog.
|
||||
# If the following option is commented out, snmpd will print each incoming
|
||||
# connection, which can be useful for debugging.
|
||||
|
||||
dontLogTCPWrappersConnects yes
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Process checks.
|
||||
#
|
||||
# The following are examples of how to use the agent to check for
|
||||
# processes running on the host. The syntax looks something like:
|
||||
#
|
||||
# proc NAME [MAX=0] [MIN=0]
|
||||
#
|
||||
# NAME: the name of the process to check for. It must match
|
||||
# exactly (ie, http will not find httpd processes).
|
||||
# MAX: the maximum number allowed to be running. Defaults to 0.
|
||||
# MIN: the minimum number to be running. Defaults to 0.
|
||||
|
||||
#
|
||||
# Examples (commented out by default):
|
||||
#
|
||||
|
||||
# Make sure mountd is running
|
||||
#proc mountd
|
||||
|
||||
# Make sure there are no more than 4 ntalkds running, but 0 is ok too.
|
||||
#proc ntalkd 4
|
||||
|
||||
# Make sure at least one sendmail, but less than or equal to 10 are running.
|
||||
#proc sendmail 10 1
|
||||
|
||||
# A snmpwalk of the process mib tree would look something like this:
|
||||
#
|
||||
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.2
|
||||
# enterprises.ucdavis.procTable.prEntry.prIndex.1 = 1
|
||||
# enterprises.ucdavis.procTable.prEntry.prIndex.2 = 2
|
||||
# enterprises.ucdavis.procTable.prEntry.prIndex.3 = 3
|
||||
# enterprises.ucdavis.procTable.prEntry.prNames.1 = "mountd"
|
||||
# enterprises.ucdavis.procTable.prEntry.prNames.2 = "ntalkd"
|
||||
# enterprises.ucdavis.procTable.prEntry.prNames.3 = "sendmail"
|
||||
# enterprises.ucdavis.procTable.prEntry.prMin.1 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prMin.2 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prMin.3 = 1
|
||||
# enterprises.ucdavis.procTable.prEntry.prMax.1 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prMax.2 = 4
|
||||
# enterprises.ucdavis.procTable.prEntry.prMax.3 = 10
|
||||
# enterprises.ucdavis.procTable.prEntry.prCount.1 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prCount.2 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prCount.3 = 1
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.1 = 1
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.2 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.3 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrMessage.1 = "No mountd process running."
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrMessage.2 = ""
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrMessage.3 = ""
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrFix.1 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrFix.2 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrFix.3 = 0
|
||||
#
|
||||
# Note that the errorFlag for mountd is set to 1 because one is not
|
||||
# running (in this case an rpc.mountd is, but thats not good enough),
|
||||
# and the ErrMessage tells you what's wrong. The configuration
|
||||
# imposed in the snmpd.conf file is also shown.
|
||||
#
|
||||
# Special Case: When the min and max numbers are both 0, it assumes
|
||||
# you want a max of infinity and a min of 1.
|
||||
#
|
||||
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Executables/scripts
|
||||
#
|
||||
|
||||
#
|
||||
# You can also have programs run by the agent that return a single
|
||||
# line of output and an exit code. Here are two examples.
|
||||
#
|
||||
# exec NAME PROGRAM [ARGS ...]
|
||||
#
|
||||
# NAME: A generic name. The name must be unique for each exec statement.
|
||||
# PROGRAM: The program to run. Include the path!
|
||||
# ARGS: optional arguments to be passed to the program
|
||||
|
||||
# a simple hello world
|
||||
|
||||
#exec echotest /bin/echo hello world
|
||||
|
||||
# Run a shell script containing:
|
||||
#
|
||||
# #!/bin/sh
|
||||
# echo hello world
|
||||
# echo hi there
|
||||
# exit 35
|
||||
#
|
||||
# Note: this has been specifically commented out to prevent
|
||||
# accidental security holes due to someone else on your system writing
|
||||
# a /tmp/shtest before you do. Uncomment to use it.
|
||||
#
|
||||
#exec shelltest /bin/sh /tmp/shtest
|
||||
|
||||
# Then,
|
||||
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.8
|
||||
# enterprises.ucdavis.extTable.extEntry.extIndex.1 = 1
|
||||
# enterprises.ucdavis.extTable.extEntry.extIndex.2 = 2
|
||||
# enterprises.ucdavis.extTable.extEntry.extNames.1 = "echotest"
|
||||
# enterprises.ucdavis.extTable.extEntry.extNames.2 = "shelltest"
|
||||
# enterprises.ucdavis.extTable.extEntry.extCommand.1 = "/bin/echo hello world"
|
||||
# enterprises.ucdavis.extTable.extEntry.extCommand.2 = "/bin/sh /tmp/shtest"
|
||||
# enterprises.ucdavis.extTable.extEntry.extResult.1 = 0
|
||||
# enterprises.ucdavis.extTable.extEntry.extResult.2 = 35
|
||||
# enterprises.ucdavis.extTable.extEntry.extOutput.1 = "hello world."
|
||||
# enterprises.ucdavis.extTable.extEntry.extOutput.2 = "hello world."
|
||||
# enterprises.ucdavis.extTable.extEntry.extErrFix.1 = 0
|
||||
# enterprises.ucdavis.extTable.extEntry.extErrFix.2 = 0
|
||||
|
||||
# Note that the second line of the /tmp/shtest shell script is cut
|
||||
# off. Also note that the exit status of 35 was returned.
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
|
||||
###############################################################################
|
||||
# disk checks
|
||||
#
|
||||
|
||||
# The agent can check the amount of available disk space, and make
|
||||
# sure it is above a set limit.
|
||||
|
||||
# disk PATH [MIN=100000]
|
||||
#
|
||||
# PATH: mount path to the disk in question.
|
||||
# MIN: Disks with space below this value will have the Mib's errorFlag set.
|
||||
# Default value = 100000.
|
||||
|
||||
# Check the / partition and make sure it contains at least 10 megs.
|
||||
|
||||
#disk / 10000
|
||||
|
||||
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.9
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskIndex.1 = 0
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskPath.1 = "/" Hex: 2F
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskDevice.1 = "/dev/dsk/c201d6s0"
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskMinimum.1 = 10000
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskTotal.1 = 837130
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskAvail.1 = 316325
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskUsed.1 = 437092
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskPercent.1 = 58
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskErrorFlag.1 = 0
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskErrorMsg.1 = ""
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
|
||||
###############################################################################
|
||||
# load average checks
|
||||
#
|
||||
|
||||
# load [1MAX=12.0] [5MAX=12.0] [15MAX=12.0]
|
||||
#
|
||||
# 1MAX: If the 1 minute load average is above this limit at query
|
||||
# time, the errorFlag will be set.
|
||||
# 5MAX: Similar, but for 5 min average.
|
||||
# 15MAX: Similar, but for 15 min average.
|
||||
|
||||
# Check for loads:
|
||||
#load 12 14 14
|
||||
|
||||
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.10
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.1 = 1
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.2 = 2
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.3 = 3
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.1 = "Load-1"
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.2 = "Load-5"
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.3 = "Load-15"
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.1 = "0.49" Hex: 30 2E 34 39
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.2 = "0.31" Hex: 30 2E 33 31
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.3 = "0.26" Hex: 30 2E 32 36
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.1 = "12.00"
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.2 = "14.00"
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.3 = "14.00"
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.1 = 0
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.2 = 0
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.3 = 0
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.1 = ""
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.2 = ""
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.3 = ""
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Extensible sections.
|
||||
#
|
||||
|
||||
# This alleviates the multiple line output problem found in the
|
||||
# previous executable mib by placing each mib in its own mib table:
|
||||
|
||||
# Run a shell script containing:
|
||||
#
|
||||
# #!/bin/sh
|
||||
# echo hello world
|
||||
# echo hi there
|
||||
# exit 35
|
||||
#
|
||||
# Note: this has been specifically commented out to prevent
|
||||
# accidental security holes due to someone else on your system writing
|
||||
# a /tmp/shtest before you do. Uncomment to use it.
|
||||
#
|
||||
# exec .1.3.6.1.4.1.2021.50 shelltest /bin/sh /tmp/shtest
|
||||
|
||||
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.50
|
||||
# enterprises.ucdavis.50.1.1 = 1
|
||||
# enterprises.ucdavis.50.2.1 = "shelltest"
|
||||
# enterprises.ucdavis.50.3.1 = "/bin/sh /tmp/shtest"
|
||||
# enterprises.ucdavis.50.100.1 = 35
|
||||
# enterprises.ucdavis.50.101.1 = "hello world."
|
||||
# enterprises.ucdavis.50.101.2 = "hi there."
|
||||
# enterprises.ucdavis.50.102.1 = 0
|
||||
|
||||
# Now the Output has grown to two lines, and we can see the 'hi
|
||||
# there.' output as the second line from our shell script.
|
||||
#
|
||||
# Note that you must alter the mib.txt file to be correct if you want
|
||||
# the .50.* outputs above to change to reasonable text descriptions.
|
||||
|
||||
# Other ideas:
|
||||
#
|
||||
# exec .1.3.6.1.4.1.2021.51 ps /bin/ps
|
||||
# exec .1.3.6.1.4.1.2021.52 top /usr/local/bin/top
|
||||
# exec .1.3.6.1.4.1.2021.53 mailq /usr/bin/mailq
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Pass through control.
|
||||
#
|
||||
|
||||
# Usage:
|
||||
# pass MIBOID EXEC-COMMAND
|
||||
#
|
||||
# This will pass total control of the mib underneath the MIBOID
|
||||
# portion of the mib to the EXEC-COMMAND.
|
||||
#
|
||||
# Note: You'll have to change the path of the passtest script to your
|
||||
# source directory or install it in the given location.
|
||||
#
|
||||
# Example: (see the script for details)
|
||||
# (commented out here since it requires that you place the
|
||||
# script in the right location. (its not installed by default))
|
||||
|
||||
# pass .1.3.6.1.4.1.2021.255 /bin/sh /usr/local/local/passtest
|
||||
|
||||
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.255
|
||||
# enterprises.ucdavis.255.1 = "life the universe and everything"
|
||||
# enterprises.ucdavis.255.2.1 = 42
|
||||
# enterprises.ucdavis.255.2.2 = OID: 42.42.42
|
||||
# enterprises.ucdavis.255.3 = Timeticks: (363136200) 42 days, 0:42:42
|
||||
# enterprises.ucdavis.255.4 = IpAddress: 127.0.0.1
|
||||
# enterprises.ucdavis.255.5 = 42
|
||||
# enterprises.ucdavis.255.6 = Gauge: 42
|
||||
#
|
||||
# % snmpget -v 1 localhost public .1.3.6.1.4.1.2021.255.5
|
||||
# enterprises.ucdavis.255.5 = 42
|
||||
#
|
||||
# % snmpset -v 1 localhost public .1.3.6.1.4.1.2021.255.1 s "New string"
|
||||
# enterprises.ucdavis.255.1 = "New string"
|
||||
#
|
||||
|
||||
# For specific usage information, see the man/snmpd.conf.5 manual page
|
||||
# as well as the local/passtest script used in the above example.
|
||||
|
||||
###############################################################################
|
||||
# Further Information
|
||||
#
|
||||
# See the snmpd.conf manual page, and the output of "snmpd -H".
|
||||
@@ -0,0 +1,464 @@
|
||||
###############################################################################
|
||||
#
|
||||
# snmpd.conf:
|
||||
# An example configuration file for configuring the ucd-snmp snmpd agent.
|
||||
#
|
||||
###############################################################################
|
||||
#
|
||||
# This file is intended to only be as a starting point. Many more
|
||||
# configuration directives exist than are mentioned in this file. For
|
||||
# full details, see the snmpd.conf(5) manual page.
|
||||
#
|
||||
# All lines beginning with a '#' are comments and are intended for you
|
||||
# to read. All other lines are configuration commands for the agent.
|
||||
|
||||
###############################################################################
|
||||
# Access Control
|
||||
###############################################################################
|
||||
|
||||
# As shipped, the snmpd demon will only respond to queries on the
|
||||
# system mib group until this file is replaced or modified for
|
||||
# security purposes. Examples are shown below about how to increase the
|
||||
# level of access.
|
||||
|
||||
# By far, the most common question I get about the agent is "why won't
|
||||
# it work?", when really it should be "how do I configure the agent to
|
||||
# allow me to access it?"
|
||||
#
|
||||
# By default, the agent responds to the "public" community for read
|
||||
# only access, if run out of the box without any configuration file in
|
||||
# place. The following examples show you other ways of configuring
|
||||
# the agent so that you can change the community names, and give
|
||||
# yourself write access to the mib tree as well.
|
||||
#
|
||||
# For more information, read the FAQ as well as the snmpd.conf(5)
|
||||
# manual page.
|
||||
|
||||
####
|
||||
# First, map the community name "public" into a "security name"
|
||||
|
||||
# sec.name source community
|
||||
com2sec notConfigUser default public
|
||||
|
||||
####
|
||||
# Second, map the security name into a group name:
|
||||
|
||||
# groupName securityModel securityName
|
||||
group notConfigGroup v1 notConfigUser
|
||||
group notConfigGroup v2c notConfigUser
|
||||
|
||||
####
|
||||
# Third, create a view for us to let the group have rights to:
|
||||
|
||||
# Make at least snmpwalk -v 1 localhost -c public system fast again.
|
||||
# name incl/excl subtree mask(optional)
|
||||
view systemview included .1.3.6.1.2.1
|
||||
view systemview included .1.3.6.1.4.1.2021
|
||||
view systemview included .1.3.6.1.2.1.1
|
||||
view systemview included .1.3.6.1.2.1.25.1.1
|
||||
|
||||
####
|
||||
# Finally, grant the group read-only access to the systemview view.
|
||||
|
||||
# group context sec.model sec.level prefix read write notif
|
||||
access notConfigGroup "" any noauth exact systemview none none
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
# Here is a commented out example configuration that allows less
|
||||
# restrictive access.
|
||||
|
||||
# YOU SHOULD CHANGE THE "COMMUNITY" TOKEN BELOW TO A NEW KEYWORD ONLY
|
||||
# KNOWN AT YOUR SITE. YOU *MUST* CHANGE THE NETWORK TOKEN BELOW TO
|
||||
# SOMETHING REFLECTING YOUR LOCAL NETWORK ADDRESS SPACE.
|
||||
|
||||
## sec.name source community
|
||||
#com2sec local localhost COMMUNITY
|
||||
#com2sec mynetwork NETWORK/24 COMMUNITY
|
||||
|
||||
## group.name sec.model sec.name
|
||||
#group MyRWGroup any local
|
||||
#group MyROGroup any mynetwork
|
||||
#
|
||||
#group MyRWGroup any otherv3user
|
||||
#...
|
||||
|
||||
## incl/excl subtree mask
|
||||
#view all included .1 80
|
||||
|
||||
## -or just the mib2 tree-
|
||||
|
||||
#view mib2 included .iso.org.dod.internet.mgmt.mib-2 fc
|
||||
|
||||
|
||||
## context sec.model sec.level prefix read write notif
|
||||
#access MyROGroup "" any noauth 0 all none none
|
||||
#access MyRWGroup "" any noauth 0 all all all
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Sample configuration to make net-snmpd RFC 1213.
|
||||
# Unfortunately v1 and v2c don't allow any user based authentification, so
|
||||
# opening up the default config is not an option from a security point.
|
||||
#
|
||||
# WARNING: If you uncomment the following lines you allow write access to your
|
||||
# snmpd daemon from any source! To avoid this use different names for your
|
||||
# community or split out the write access to a different community and
|
||||
# restrict it to your local network.
|
||||
# Also remember to comment the syslocation and syscontact parameters later as
|
||||
# otherwise they are still read only (see FAQ for net-snmp).
|
||||
#
|
||||
|
||||
# First, map the community name "public" into a "security name"
|
||||
# sec.name source community
|
||||
#com2sec notConfigUser default public
|
||||
|
||||
# Second, map the security name into a group name:
|
||||
# groupName securityModel securityName
|
||||
#group notConfigGroup v1 notConfigUser
|
||||
#group notConfigGroup v2c notConfigUser
|
||||
|
||||
# Third, create a view for us to let the group have rights to:
|
||||
# Open up the whole tree for ro, make the RFC 1213 required ones rw.
|
||||
# name incl/excl subtree mask(optional)
|
||||
#view roview included .1
|
||||
#view rwview included system.sysContact
|
||||
#view rwview included system.sysName
|
||||
#view rwview included system.sysLocation
|
||||
#view rwview included interfaces.ifTable.ifEntry.ifAdminStatus
|
||||
#view rwview included at.atTable.atEntry.atPhysAddress
|
||||
#view rwview included at.atTable.atEntry.atNetAddress
|
||||
#view rwview included ip.ipForwarding
|
||||
#view rwview included ip.ipDefaultTTL
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteDest
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteIfIndex
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric1
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric2
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric3
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric4
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteType
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteAge
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMask
|
||||
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric5
|
||||
#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaIfIndex
|
||||
#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaPhysAddress
|
||||
#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaNetAddress
|
||||
#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaType
|
||||
#view rwview included tcp.tcpConnTable.tcpConnEntry.tcpConnState
|
||||
#view rwview included egp.egpNeighTable.egpNeighEntry.egpNeighEventTrigger
|
||||
#view rwview included snmp.snmpEnableAuthenTraps
|
||||
|
||||
# Finally, grant the group read-only access to the systemview view.
|
||||
# group context sec.model sec.level prefix read write notif
|
||||
#access notConfigGroup "" any noauth exact roview rwview none
|
||||
|
||||
|
||||
|
||||
###############################################################################
|
||||
# System contact information
|
||||
#
|
||||
|
||||
# It is also possible to set the sysContact and sysLocation system
|
||||
# variables through the snmpd.conf file:
|
||||
|
||||
syslocation Unknown (edit /etc/snmp/snmpd.conf)
|
||||
syscontact Root <root@localhost> (configure /etc/snmp/snmp.local.conf)
|
||||
|
||||
# Example output of snmpwalk:
|
||||
# % snmpwalk -v 1 localhost -c public system
|
||||
# system.sysDescr.0 = "SunOS name sun4c"
|
||||
# system.sysObjectID.0 = OID: enterprises.ucdavis.ucdSnmpAgent.sunos4
|
||||
# system.sysUpTime.0 = Timeticks: (595637548) 68 days, 22:32:55
|
||||
# system.sysContact.0 = "Me <me@somewhere.org>"
|
||||
# system.sysName.0 = "name"
|
||||
# system.sysLocation.0 = "Right here, right now."
|
||||
# system.sysServices.0 = 72
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Logging
|
||||
#
|
||||
|
||||
# We do not want annoying "Connection from UDP: " messages in syslog.
|
||||
# If the following option is commented out, snmpd will print each incoming
|
||||
# connection, which can be useful for debugging.
|
||||
|
||||
dontLogTCPWrappersConnects yes
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Process checks.
|
||||
#
|
||||
# The following are examples of how to use the agent to check for
|
||||
# processes running on the host. The syntax looks something like:
|
||||
#
|
||||
# proc NAME [MAX=0] [MIN=0]
|
||||
#
|
||||
# NAME: the name of the process to check for. It must match
|
||||
# exactly (ie, http will not find httpd processes).
|
||||
# MAX: the maximum number allowed to be running. Defaults to 0.
|
||||
# MIN: the minimum number to be running. Defaults to 0.
|
||||
|
||||
#
|
||||
# Examples (commented out by default):
|
||||
#
|
||||
|
||||
# Make sure mountd is running
|
||||
#proc mountd
|
||||
|
||||
# Make sure there are no more than 4 ntalkds running, but 0 is ok too.
|
||||
#proc ntalkd 4
|
||||
|
||||
# Make sure at least one sendmail, but less than or equal to 10 are running.
|
||||
#proc sendmail 10 1
|
||||
|
||||
# A snmpwalk of the process mib tree would look something like this:
|
||||
#
|
||||
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.2
|
||||
# enterprises.ucdavis.procTable.prEntry.prIndex.1 = 1
|
||||
# enterprises.ucdavis.procTable.prEntry.prIndex.2 = 2
|
||||
# enterprises.ucdavis.procTable.prEntry.prIndex.3 = 3
|
||||
# enterprises.ucdavis.procTable.prEntry.prNames.1 = "mountd"
|
||||
# enterprises.ucdavis.procTable.prEntry.prNames.2 = "ntalkd"
|
||||
# enterprises.ucdavis.procTable.prEntry.prNames.3 = "sendmail"
|
||||
# enterprises.ucdavis.procTable.prEntry.prMin.1 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prMin.2 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prMin.3 = 1
|
||||
# enterprises.ucdavis.procTable.prEntry.prMax.1 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prMax.2 = 4
|
||||
# enterprises.ucdavis.procTable.prEntry.prMax.3 = 10
|
||||
# enterprises.ucdavis.procTable.prEntry.prCount.1 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prCount.2 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prCount.3 = 1
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.1 = 1
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.2 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.3 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrMessage.1 = "No mountd process running."
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrMessage.2 = ""
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrMessage.3 = ""
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrFix.1 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrFix.2 = 0
|
||||
# enterprises.ucdavis.procTable.prEntry.prErrFix.3 = 0
|
||||
#
|
||||
# Note that the errorFlag for mountd is set to 1 because one is not
|
||||
# running (in this case an rpc.mountd is, but thats not good enough),
|
||||
# and the ErrMessage tells you what's wrong. The configuration
|
||||
# imposed in the snmpd.conf file is also shown.
|
||||
#
|
||||
# Special Case: When the min and max numbers are both 0, it assumes
|
||||
# you want a max of infinity and a min of 1.
|
||||
#
|
||||
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Executables/scripts
|
||||
#
|
||||
|
||||
#
|
||||
# You can also have programs run by the agent that return a single
|
||||
# line of output and an exit code. Here are two examples.
|
||||
#
|
||||
# exec NAME PROGRAM [ARGS ...]
|
||||
#
|
||||
# NAME: A generic name. The name must be unique for each exec statement.
|
||||
# PROGRAM: The program to run. Include the path!
|
||||
# ARGS: optional arguments to be passed to the program
|
||||
|
||||
# a simple hello world
|
||||
|
||||
#exec echotest /bin/echo hello world
|
||||
|
||||
# Run a shell script containing:
|
||||
#
|
||||
# #!/bin/sh
|
||||
# echo hello world
|
||||
# echo hi there
|
||||
# exit 35
|
||||
#
|
||||
# Note: this has been specifically commented out to prevent
|
||||
# accidental security holes due to someone else on your system writing
|
||||
# a /tmp/shtest before you do. Uncomment to use it.
|
||||
#
|
||||
#exec shelltest /bin/sh /tmp/shtest
|
||||
|
||||
# Then,
|
||||
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.8
|
||||
# enterprises.ucdavis.extTable.extEntry.extIndex.1 = 1
|
||||
# enterprises.ucdavis.extTable.extEntry.extIndex.2 = 2
|
||||
# enterprises.ucdavis.extTable.extEntry.extNames.1 = "echotest"
|
||||
# enterprises.ucdavis.extTable.extEntry.extNames.2 = "shelltest"
|
||||
# enterprises.ucdavis.extTable.extEntry.extCommand.1 = "/bin/echo hello world"
|
||||
# enterprises.ucdavis.extTable.extEntry.extCommand.2 = "/bin/sh /tmp/shtest"
|
||||
# enterprises.ucdavis.extTable.extEntry.extResult.1 = 0
|
||||
# enterprises.ucdavis.extTable.extEntry.extResult.2 = 35
|
||||
# enterprises.ucdavis.extTable.extEntry.extOutput.1 = "hello world."
|
||||
# enterprises.ucdavis.extTable.extEntry.extOutput.2 = "hello world."
|
||||
# enterprises.ucdavis.extTable.extEntry.extErrFix.1 = 0
|
||||
# enterprises.ucdavis.extTable.extEntry.extErrFix.2 = 0
|
||||
|
||||
# Note that the second line of the /tmp/shtest shell script is cut
|
||||
# off. Also note that the exit status of 35 was returned.
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
|
||||
###############################################################################
|
||||
# disk checks
|
||||
#
|
||||
|
||||
# The agent can check the amount of available disk space, and make
|
||||
# sure it is above a set limit.
|
||||
|
||||
# disk PATH [MIN=100000]
|
||||
#
|
||||
# PATH: mount path to the disk in question.
|
||||
# MIN: Disks with space below this value will have the Mib's errorFlag set.
|
||||
# Default value = 100000.
|
||||
|
||||
# Check the / partition and make sure it contains at least 10 megs.
|
||||
|
||||
#disk / 10000
|
||||
|
||||
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.9
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskIndex.1 = 0
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskPath.1 = "/" Hex: 2F
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskDevice.1 = "/dev/dsk/c201d6s0"
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskMinimum.1 = 10000
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskTotal.1 = 837130
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskAvail.1 = 316325
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskUsed.1 = 437092
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskPercent.1 = 58
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskErrorFlag.1 = 0
|
||||
# enterprises.ucdavis.diskTable.dskEntry.diskErrorMsg.1 = ""
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
|
||||
###############################################################################
|
||||
# load average checks
|
||||
#
|
||||
|
||||
# load [1MAX=12.0] [5MAX=12.0] [15MAX=12.0]
|
||||
#
|
||||
# 1MAX: If the 1 minute load average is above this limit at query
|
||||
# time, the errorFlag will be set.
|
||||
# 5MAX: Similar, but for 5 min average.
|
||||
# 15MAX: Similar, but for 15 min average.
|
||||
|
||||
# Check for loads:
|
||||
#load 12 14 14
|
||||
|
||||
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.10
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.1 = 1
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.2 = 2
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.3 = 3
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.1 = "Load-1"
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.2 = "Load-5"
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.3 = "Load-15"
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.1 = "0.49" Hex: 30 2E 34 39
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.2 = "0.31" Hex: 30 2E 33 31
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.3 = "0.26" Hex: 30 2E 32 36
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.1 = "12.00"
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.2 = "14.00"
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.3 = "14.00"
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.1 = 0
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.2 = 0
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.3 = 0
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.1 = ""
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.2 = ""
|
||||
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.3 = ""
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Extensible sections.
|
||||
#
|
||||
|
||||
# This alleviates the multiple line output problem found in the
|
||||
# previous executable mib by placing each mib in its own mib table:
|
||||
|
||||
# Run a shell script containing:
|
||||
#
|
||||
# #!/bin/sh
|
||||
# echo hello world
|
||||
# echo hi there
|
||||
# exit 35
|
||||
#
|
||||
# Note: this has been specifically commented out to prevent
|
||||
# accidental security holes due to someone else on your system writing
|
||||
# a /tmp/shtest before you do. Uncomment to use it.
|
||||
#
|
||||
# exec .1.3.6.1.4.1.2021.50 shelltest /bin/sh /tmp/shtest
|
||||
|
||||
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.50
|
||||
# enterprises.ucdavis.50.1.1 = 1
|
||||
# enterprises.ucdavis.50.2.1 = "shelltest"
|
||||
# enterprises.ucdavis.50.3.1 = "/bin/sh /tmp/shtest"
|
||||
# enterprises.ucdavis.50.100.1 = 35
|
||||
# enterprises.ucdavis.50.101.1 = "hello world."
|
||||
# enterprises.ucdavis.50.101.2 = "hi there."
|
||||
# enterprises.ucdavis.50.102.1 = 0
|
||||
|
||||
# Now the Output has grown to two lines, and we can see the 'hi
|
||||
# there.' output as the second line from our shell script.
|
||||
#
|
||||
# Note that you must alter the mib.txt file to be correct if you want
|
||||
# the .50.* outputs above to change to reasonable text descriptions.
|
||||
|
||||
# Other ideas:
|
||||
#
|
||||
# exec .1.3.6.1.4.1.2021.51 ps /bin/ps
|
||||
# exec .1.3.6.1.4.1.2021.52 top /usr/local/bin/top
|
||||
# exec .1.3.6.1.4.1.2021.53 mailq /usr/bin/mailq
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Pass through control.
|
||||
#
|
||||
|
||||
# Usage:
|
||||
# pass MIBOID EXEC-COMMAND
|
||||
#
|
||||
# This will pass total control of the mib underneath the MIBOID
|
||||
# portion of the mib to the EXEC-COMMAND.
|
||||
#
|
||||
# Note: You'll have to change the path of the passtest script to your
|
||||
# source directory or install it in the given location.
|
||||
#
|
||||
# Example: (see the script for details)
|
||||
# (commented out here since it requires that you place the
|
||||
# script in the right location. (its not installed by default))
|
||||
|
||||
# pass .1.3.6.1.4.1.2021.255 /bin/sh /usr/local/local/passtest
|
||||
|
||||
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.255
|
||||
# enterprises.ucdavis.255.1 = "life the universe and everything"
|
||||
# enterprises.ucdavis.255.2.1 = 42
|
||||
# enterprises.ucdavis.255.2.2 = OID: 42.42.42
|
||||
# enterprises.ucdavis.255.3 = Timeticks: (363136200) 42 days, 0:42:42
|
||||
# enterprises.ucdavis.255.4 = IpAddress: 127.0.0.1
|
||||
# enterprises.ucdavis.255.5 = 42
|
||||
# enterprises.ucdavis.255.6 = Gauge: 42
|
||||
#
|
||||
# % snmpget -v 1 localhost public .1.3.6.1.4.1.2021.255.5
|
||||
# enterprises.ucdavis.255.5 = 42
|
||||
#
|
||||
# % snmpset -v 1 localhost public .1.3.6.1.4.1.2021.255.1 s "New string"
|
||||
# enterprises.ucdavis.255.1 = "New string"
|
||||
#
|
||||
|
||||
# For specific usage information, see the man/snmpd.conf.5 manual page
|
||||
# as well as the local/passtest script used in the above example.
|
||||
|
||||
###############################################################################
|
||||
# Further Information
|
||||
#
|
||||
# See the snmpd.conf manual page, and the output of "snmpd -H".
|
||||
@@ -0,0 +1,6 @@
|
||||
<secret ephemeral='no' private='no'>
|
||||
<uuid>565f7a01-3486-4a62-85bf-fbcc8490d7ca</uuid>
|
||||
<usage type='ceph'>
|
||||
<name>client.vms secret</name>
|
||||
</usage>
|
||||
</secret>
|
||||
@@ -0,0 +1,2 @@
|
||||
---
|
||||
ansible_ssh_user: cephadmin
|
||||
@@ -0,0 +1,71 @@
|
||||
# This is the default ansible 'hosts' file.
|
||||
#
|
||||
# It should live in /etc/ansible/hosts
|
||||
#
|
||||
# - Comments begin with the '#' character
|
||||
# - Blank lines are ignored
|
||||
# - Groups of hosts are delimited by [header] elements
|
||||
# - You can enter hostnames or ip addresses
|
||||
# - A hostname/ip can be a member of multiple groups
|
||||
|
||||
# Ex 1: Ungrouped hosts, specify before any group headers.
|
||||
|
||||
## green.example.com
|
||||
## blue.example.com
|
||||
## 192.168.100.1
|
||||
## 192.168.100.10
|
||||
|
||||
# Ex 2: A collection of hosts belonging to the 'webservers' group
|
||||
|
||||
## [webservers]
|
||||
## alpha.example.org
|
||||
## beta.example.org
|
||||
## 192.168.1.100
|
||||
## 192.168.1.110
|
||||
|
||||
# If you have multiple hosts following a pattern you can specify
|
||||
# them like this:
|
||||
|
||||
## www[001:006].example.com
|
||||
|
||||
# Ex 3: A collection of database servers in the 'dbservers' group
|
||||
|
||||
## [dbservers]
|
||||
##
|
||||
## db01.intranet.mydomain.net
|
||||
## db02.intranet.mydomain.net
|
||||
## 10.25.1.56
|
||||
## 10.25.1.57
|
||||
|
||||
# Here's another example of host ranges, this time there are no
|
||||
# leading 0s:
|
||||
|
||||
## db-[99:101]-node.example.com
|
||||
|
||||
[bonchvisors]
|
||||
bonchvisor04 ansible_ssh_host=172.17.2.54 ansible_user=cephadmin
|
||||
bonchvisor05 ansible_ssh_host=172.17.2.55 ansible_user=cephadmin
|
||||
bonchvisor06 ansible_ssh_host=172.17.2.56 ansible_user=cephadmin
|
||||
bonchvisor07 ansible_ssh_host=172.17.2.57 ansible_user=cephadmin
|
||||
bonchvisor08 ansible_ssh_host=172.17.2.58 ansible_user=cephadmin
|
||||
bonchvisor09 ansible_ssh_host=172.17.2.59 ansible_user=cephadmin
|
||||
bonchvisor10 ansible_ssh_host=172.17.2.60 ansible_user=cephadmin
|
||||
bonchvisor11 ansible_ssh_host=172.17.2.61 ansible_user=cephadmin
|
||||
bonchvisor12 ansible_ssh_host=172.17.2.62 ansible_user=cephadmin
|
||||
|
||||
[bonchvisors-small]
|
||||
bonchvisor05 ansible_ssh_host=172.17.2.55
|
||||
bonchvisor06 ansible_ssh_host=172.17.2.56
|
||||
bonchvisor07 ansible_ssh_host=172.17.2.57
|
||||
bonchvisor08 ansible_ssh_host=172.17.2.58
|
||||
bonchvisor09 ansible_ssh_host=172.17.2.59
|
||||
bonchvisor10 ansible_ssh_host=172.17.2.60
|
||||
bonchvisor11 ansible_ssh_host=172.17.2.61
|
||||
bonchvisor12 ansible_ssh_host=172.17.2.62
|
||||
|
||||
[bonchvisor-dpdk]
|
||||
|
||||
[controllers]
|
||||
controller-ceph ansible_ssh_host=172.17.2.50
|
||||
controller-virt ansible_ssh_host=172.17.2.100
|
||||
controller-net ansible_ssh_host=172.17.2.200
|
||||
@@ -0,0 +1,26 @@
|
||||
- hosts: {{ your hosts }}
|
||||
remote_user: {{ you users }}
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
|
||||
tasks:
|
||||
|
||||
- name: ensure a list of packages installed
|
||||
yum:
|
||||
name: centos-release-openstack-pike
|
||||
state: latest
|
||||
|
||||
- name: upgrade all packages
|
||||
yum:
|
||||
name: '*'
|
||||
state: latest
|
||||
|
||||
|
||||
- name: ensure a list of packages installed
|
||||
yum:
|
||||
name: "{{ packages }}"
|
||||
vars:
|
||||
packages:
|
||||
- python-openstackclient
|
||||
- openstack-selinux
|
||||
@@ -0,0 +1,27 @@
|
||||
---
|
||||
- hosts: bonchvisors
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
|
||||
tasks:
|
||||
|
||||
- name: Add hosts entry
|
||||
lineinfile:
|
||||
path: /etc/hosts
|
||||
line: "{{ item.hosts }}"
|
||||
with_items:
|
||||
- { hosts: '172.17.3.54 bonchvisor04' }
|
||||
- { hosts: '172.17.3.55 bonchvisor05' }
|
||||
- { hosts: '172.17.3.56 bonchvisor06' }
|
||||
- { hosts: '172.17.3.57 bonchvisor07' }
|
||||
- { hosts: '172.17.3.58 bonchvisor08' }
|
||||
- { hosts: '172.17.3.59 bonchvisor09' }
|
||||
- { hosts: '172.17.3.60 bonchvisor10' }
|
||||
- { hosts: '172.17.3.61 bonchvisor11' }
|
||||
- { hosts: '172.17.3.62 bonchvisor12' }
|
||||
- { hosts: '172.17.3.63 bonchvisor13' }
|
||||
- { hosts: '172.17.3.64 bonchvisor14' }
|
||||
- { hosts: '172.17.3.50 controller-ceph' }
|
||||
- { hosts: '172.17.3.100 controller-virt' }
|
||||
@@ -0,0 +1,58 @@
|
||||
---
|
||||
- hosts: bonchvisors
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
vars:
|
||||
disk:
|
||||
- sdb
|
||||
- sdc
|
||||
- sdd
|
||||
- sde
|
||||
|
||||
tasks:
|
||||
|
||||
- name: detect lv
|
||||
shell: pvscan | grep ceph | sed -n "1,4p" | awk '{print $4}'
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: ceph_lv
|
||||
|
||||
- name: detect pv
|
||||
shell: pvscan | grep ceph | sed -n "1,4p" | awk '{print $2}'
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: ceph_pv
|
||||
|
||||
- name: list PV
|
||||
debug:
|
||||
msg: "{{ item }}"
|
||||
loop: "{{ceph_pv.stdout_lines}}"
|
||||
when: ceph_pv.stdout != ""
|
||||
|
||||
- name: delete VG
|
||||
lvg:
|
||||
vg: "{{ item }}"
|
||||
state: absent
|
||||
force: yes
|
||||
loop: "{{ceph_lv.stdout_lines}}"
|
||||
when: ceph_lv.stdout != ""
|
||||
|
||||
- name: delete pv
|
||||
shell: pvremove -y {{ item }}
|
||||
args:
|
||||
executable: /bin/bash
|
||||
loop: "{{ceph_pv.stdout_lines}}"
|
||||
when: ceph_pv.stdout != ""
|
||||
|
||||
- name: wipe HDD
|
||||
shell: wipefs -a /dev/{{item}}
|
||||
args:
|
||||
executable: /bin/bash
|
||||
with_items: "{{ disk }}"
|
||||
|
||||
- name: delete partition info
|
||||
shell: for i in b c d; do dd if=/dev/zero of=/dev/sd$i bs=512 count=1 conv=notrunc; done
|
||||
args:
|
||||
executable: /bin/bash
|
||||
@@ -0,0 +1,72 @@
|
||||
---
|
||||
- hosts: bonchvisors
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
vars:
|
||||
disk:
|
||||
- sdb
|
||||
- sdc
|
||||
- sdd
|
||||
- sde
|
||||
|
||||
tasks:
|
||||
|
||||
- name: detect lv
|
||||
shell: pvscan | grep ceph | sed -n "1,4p" | awk '{print $4}'
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: ceph_lv
|
||||
|
||||
- name: detect pv
|
||||
shell: pvscan | grep ceph | sed -n "1,4p" | awk '{print $2}'
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: ceph_pv
|
||||
|
||||
- name: list PV
|
||||
debug:
|
||||
msg: "{{ item }}"
|
||||
loop: "{{ceph_pv.stdout_lines}}"
|
||||
when: ceph_pv.stdout != ""
|
||||
|
||||
- name: list mounted ceph volume
|
||||
shell: mount | grep ceph | grep -v tmpfs | awk '{print $3}'
|
||||
args:
|
||||
executable: /bin/bash
|
||||
warn: false
|
||||
register: ceph_mount
|
||||
|
||||
- name: umount OSD
|
||||
shell: umount {{item}}
|
||||
args:
|
||||
executable: /bin/bash
|
||||
loop: "{{ceph_mount.stdout_lines}}"
|
||||
when: ceph_lv.stdout != ""
|
||||
|
||||
- name: delete VG
|
||||
lvg:
|
||||
vg: "{{ item }}"
|
||||
state: absent
|
||||
force: yes
|
||||
loop: "{{ceph_lv.stdout_lines}}"
|
||||
when: ceph_lv.stdout != ""
|
||||
|
||||
- name: delete pv
|
||||
shell: pvremove -y {{ item }}
|
||||
args:
|
||||
executable: /bin/bash
|
||||
loop: "{{ceph_pv.stdout_lines}}"
|
||||
when: ceph_pv.stdout != ""
|
||||
|
||||
- name: wipe HDD
|
||||
shell: wipefs -a /dev/{{item}}
|
||||
args:
|
||||
executable: /bin/bash
|
||||
with_items: "{{ disk }}"
|
||||
|
||||
- name: delete partition info
|
||||
shell: for i in b c d; do dd if=/dev/zero of=/dev/sd$i bs=512 count=1 conv=notrunc; done
|
||||
args:
|
||||
executable: /bin/bash
|
||||
@@ -0,0 +1,43 @@
|
||||
---
|
||||
- hosts: bonchvisors
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
vars:
|
||||
disk:
|
||||
- sdb
|
||||
- sdc
|
||||
- sdd
|
||||
|
||||
tasks:
|
||||
|
||||
# - name: list variables
|
||||
# debug:
|
||||
# msg: "{{ item }}"
|
||||
# loop: "{{ disk }}"
|
||||
|
||||
- name: wipe SSD
|
||||
shell: wipefs -a /dev/sde
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: SSD to gpt
|
||||
shell: parted -s /dev/sde mklabel gpt
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: create ssd {{disk[0]}} db partitions
|
||||
shell: parted /dev/sde mkpart ceph-db-{{disk[0]}} ext2 0% 20%
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: create ssd {{disk[1]}} db partitions
|
||||
shell: parted /dev/sde mkpart ceph-db-{{disk[1]}} ext2 20% 40%
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: create ssd {{disk[2]}} db partitions
|
||||
shell: parted /dev/sde mkpart ceph-db-{{disk[2]}} ext2 40% 60%
|
||||
args:
|
||||
executable: /bin/bash
|
||||
@@ -0,0 +1,39 @@
|
||||
---
|
||||
- hosts: bonchvisors
|
||||
serial: 1
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
vars:
|
||||
disk:
|
||||
- sdb
|
||||
- sdc
|
||||
- sdd
|
||||
dbpart:
|
||||
- sde1
|
||||
- sde2
|
||||
- sde3
|
||||
|
||||
tasks:
|
||||
|
||||
# - name: list variables
|
||||
# debug:
|
||||
# msg: ceph-volume lvm create --bluestore --data /dev/{{disk[index]}} --block.db /dev/{{dbpart[index]}}
|
||||
# loop: "{{ disk|flatten(levels=1) }}"
|
||||
# loop_control:
|
||||
# index_var: index
|
||||
|
||||
# - name: wipe HDD
|
||||
# shell: wipefs -a /dev/{{item}}
|
||||
# args:
|
||||
# executable: /bin/bash
|
||||
# with_items: "{{ disk }}"
|
||||
|
||||
- name: create OSD on hosts
|
||||
shell: ceph-volume lvm create --bluestore --data /dev/{{disk[index]}} --block.db /dev/{{dbpart[index]}}
|
||||
args:
|
||||
executable: /bin/bash
|
||||
loop: "{{ disk|flatten(levels=1) }}"
|
||||
loop_control:
|
||||
index_var: index
|
||||
@@ -0,0 +1,41 @@
|
||||
---
|
||||
- hosts: bonchvisors
|
||||
serial: 1
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
vars:
|
||||
disk:
|
||||
- sda
|
||||
- sdb
|
||||
- sdc
|
||||
- sdd
|
||||
dbpart:
|
||||
- sde5
|
||||
- sde6
|
||||
- sde7
|
||||
- sde8
|
||||
|
||||
tasks:
|
||||
|
||||
# - name: list variables
|
||||
# debug:
|
||||
# msg: ceph-volume lvm create --bluestore --data /dev/{{disk[index]}} --block.db /dev/{{dbpart[index]}}
|
||||
# loop: "{{ disk|flatten(levels=1) }}"
|
||||
# loop_control:
|
||||
# index_var: index
|
||||
|
||||
# - name: wipe HDD
|
||||
# shell: wipefs -a /dev/{{item}}
|
||||
# args:
|
||||
# executable: /bin/bash
|
||||
# with_items: "{{ disk }}"
|
||||
|
||||
- name: create OSD on hosts
|
||||
shell: ceph-volume lvm create --filestore --data /dev/{{disk[index]}} --journal /dev/{{dbpart[index]}}
|
||||
args:
|
||||
executable: /bin/bash
|
||||
loop: "{{ disk|flatten(levels=1) }}"
|
||||
loop_control:
|
||||
index_var: index
|
||||
@@ -0,0 +1 @@
|
||||
bonchvisor04
|
||||
@@ -0,0 +1,24 @@
|
||||
---
|
||||
- hosts: bonchvisors
|
||||
serial: 11
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
|
||||
tasks:
|
||||
|
||||
- name: detect osd number in array
|
||||
shell: systemctl list-units --type=service --all | grep osd | awk '{print $1}' | awk -F "@" '{print $2}' | awk -F "." '{print $1}'
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: osd_num
|
||||
|
||||
|
||||
- name: delete osd
|
||||
shell: ceph osd crush reweight osd.{{item}} 0.0; ceph osd out {{item}}; systemctl stop ceph-osd@{{item}}; ceph osd crush remove osd.{{item}}; ceph auth del osd.{{item}}; ceph osd rm {{item}}
|
||||
args:
|
||||
executable: /bin/bash
|
||||
loop: "{{osd_num.stdout_lines}}"
|
||||
when: osd_num.stdout != ""
|
||||
|
||||
@@ -0,0 +1,24 @@
|
||||
---
|
||||
- hosts: bonchvisors
|
||||
serial: 11
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
|
||||
tasks:
|
||||
|
||||
- name: detect osd number in array
|
||||
shell: systemctl list-units --type=service --all | grep ceph-volume | awk '{print $1}'
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: volume_service
|
||||
|
||||
|
||||
- name: delete osd
|
||||
systemd:
|
||||
enabled: no
|
||||
name: "{{item}}"
|
||||
loop: "{{volume_service.stdout_lines}}"
|
||||
when: volume_service.stdout != ""
|
||||
|
||||
@@ -0,0 +1,29 @@
|
||||
---
|
||||
- hosts: bonchvisor14
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
vars:
|
||||
disk:
|
||||
- sdb
|
||||
- sdc
|
||||
- sdd
|
||||
- sde
|
||||
|
||||
tasks:
|
||||
|
||||
- name: Detect used service
|
||||
shell: systemctl list-units --type=service --all | grep ceph | grep running | awk '{print $1}'
|
||||
args:
|
||||
executable: /bin/bash
|
||||
warn: false
|
||||
register: services
|
||||
|
||||
- name: Restart all services
|
||||
shell: systemctl restart {{item}}
|
||||
args:
|
||||
executable: /bin/bash
|
||||
warn: false
|
||||
loop: "{{services.stdout_lines}}"
|
||||
when: services.stdout != ""
|
||||
@@ -0,0 +1,127 @@
|
||||
---
|
||||
- hosts: bonchvisors
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
|
||||
tasks:
|
||||
|
||||
- name: get public ip address
|
||||
shell: ip a | grep -v virbr0\:\ | grep -A2 br0\:\ | grep inet | awk '{print $2}' | awk -F "/" '{print $1}'
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: public_ip
|
||||
|
||||
- name: get private ip address
|
||||
shell: ip a | grep -v virbr0\:\ | grep -A2 br1\:\ | grep inet | awk '{print $2}' | awk -F "/" '{print $1}'
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: private_ip
|
||||
|
||||
- name: create nova.conf file
|
||||
copy:
|
||||
src: /etc/ansible/files/nova.conf
|
||||
dest: /etc/nova/nova.conf
|
||||
owner: root
|
||||
group: nova
|
||||
mode: 0640
|
||||
|
||||
- name: create neutron.conf file
|
||||
copy:
|
||||
src: /etc/ansible/files/neutron.conf
|
||||
dest: /etc/neutron/neutron.conf
|
||||
owner: root
|
||||
group: neutron
|
||||
mode: 0640
|
||||
|
||||
- name: create linuxbridge_agent.ini file
|
||||
copy:
|
||||
src: /etc/ansible/files/linuxbridge_agent.ini
|
||||
dest: /etc/neutron/plugins/ml2/linuxbridge_agent.ini
|
||||
owner: root
|
||||
group: neutron
|
||||
mode: 0640
|
||||
|
||||
- name: copy secret.xml file
|
||||
copy:
|
||||
src: /etc/ansible/files/secret.xml
|
||||
dest: /etc/ceph/secret.xml
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0640
|
||||
|
||||
- name: copy ml2_conf.ini file
|
||||
copy:
|
||||
src: /etc/ansible/files/ml2_conf.ini
|
||||
dest: /etc/neutron/plugins/ml2/ml2_conf.ini
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: copy client.cinder.key file
|
||||
copy:
|
||||
src: /etc/ansible/files/client.cinder.key
|
||||
dest: /etc/ceph/client.cinder.key
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0640
|
||||
|
||||
- name: insert public_ip in nova.conf my_ip string
|
||||
lineinfile:
|
||||
path: /etc/nova/nova.conf
|
||||
insertbefore: 'use_neutron=true'
|
||||
line: 'my_ip={{item}}'
|
||||
loop: "{{public_ip.stdout_lines}}"
|
||||
when: public_ip.stdout != ""
|
||||
|
||||
- name: insert private_ip in linuxbridge_agent.ini local_ip string for overlay network
|
||||
lineinfile:
|
||||
path: /etc/neutron/plugins/ml2/linuxbridge_agent.ini
|
||||
insertafter: '\[vxlan\]'
|
||||
line: 'local_ip={{item}}'
|
||||
loop: "{{private_ip.stdout_lines}}"
|
||||
when: private_ip.stdout != ""
|
||||
|
||||
# - name: virsh secret define
|
||||
# shell: virsh secret-define --file /etc/ceph/secret.xml
|
||||
# args:
|
||||
# executable: /bin/bash
|
||||
# register: required_uuid
|
||||
|
||||
# - name: virsh secret set
|
||||
# shell: virsh secret-set-value --secret $(echo {{ item }} | awk '{print $2}') --base64 $(cat /etc/ceph/client.cinder.key)
|
||||
# args:
|
||||
# executable: /bin/bash
|
||||
# loop: "{{required_uuid.stdout_lines}}"
|
||||
# when: required_uuid.stdout != ""
|
||||
|
||||
# - name: restart libvirtd services
|
||||
# systemd:
|
||||
# state: restarted
|
||||
# enabled: yes
|
||||
# daemon_reload: yes
|
||||
# name: libvirtd.service
|
||||
|
||||
# - name: restart nova-compute services
|
||||
# systemd:
|
||||
# state: restarted
|
||||
# enabled: yes
|
||||
# daemon_reload: yes
|
||||
# name: openstack-nova-compute.service
|
||||
|
||||
- name: restart libvirtd services
|
||||
systemd:
|
||||
state: restarted
|
||||
enabled: yes
|
||||
daemon_reload: yes
|
||||
name: libvirtd.service
|
||||
|
||||
- name: restart neutron-linux-brigde-agent services
|
||||
systemd:
|
||||
state: restarted
|
||||
enabled: yes
|
||||
daemon_reload: yes
|
||||
name: neutron-linuxbridge-agent.service
|
||||
|
||||
|
||||
@@ -0,0 +1,92 @@
|
||||
---
|
||||
- hosts: bonchvisors
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
|
||||
tasks:
|
||||
|
||||
|
||||
- name: check ceph-mon service exist
|
||||
shell: systemctl list-units --type=service --all | grep ceph-mon | awk '{print $1}'
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: mon_service
|
||||
|
||||
# определение OSD
|
||||
|
||||
- name: find OSD and check if exist
|
||||
shell: systemctl list-units --type=service --all | grep ceph-osd | awk '{print $1}'
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: osd_service
|
||||
|
||||
- name: check ceph-mon service exist
|
||||
shell: systemctl list-units --type=service --all | grep ceph-mon | awk '{print $1}'
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: mon_service
|
||||
|
||||
# определение OSD
|
||||
|
||||
- name: find OSD and check if exist
|
||||
shell: systemctl list-units --type=service --all | grep ceph-osd | awk '{print $1}'
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: osd_service
|
||||
|
||||
# определение MGR
|
||||
|
||||
- name: check ceph-mgr service exist
|
||||
shell: systemctl list-units --type=service --all | grep ceph-mgr | awk '{print $1}'
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: mgr_service
|
||||
|
||||
- name: Change ceph-osd cpu affinity
|
||||
lineinfile:
|
||||
path: /usr/lib/systemd/system/ceph-osd@.service
|
||||
insertbefore: '^RestartSec=*'
|
||||
line: CPUAffinity=0,1
|
||||
when: osd_service.stdout != ""
|
||||
|
||||
- name: Change ceph-mon cpu affinity
|
||||
lineinfile:
|
||||
path: /usr/lib/systemd/system/ceph-mon@.service
|
||||
insertbefore: '^RestartSec=*'
|
||||
line: CPUAffinity=0,1
|
||||
when: mon_service.stdout != ""
|
||||
|
||||
- name: Change ceph-mgr cpu affinity
|
||||
lineinfile:
|
||||
path: /usr/lib/systemd/system/ceph-mgr@.service
|
||||
insertbefore: '^StartLimitBurst=*'
|
||||
line: CPUAffinity=0,1
|
||||
when: mgr_service.stdout != ""
|
||||
|
||||
- name: restart ceph-osd service
|
||||
systemd:
|
||||
state: restarted
|
||||
daemon_reload: yes
|
||||
name: "{{ item }}"
|
||||
loop: "{{osd_service.stdout_lines}}"
|
||||
when: osd_service.stdout != ""
|
||||
|
||||
|
||||
- name: restart ceph-mon service
|
||||
systemd:
|
||||
state: restarted
|
||||
daemon_reload: yes
|
||||
name: "{{ item }}"
|
||||
loop: "{{mon_service.stdout_lines}}"
|
||||
when: mon_service.stdout != ""
|
||||
|
||||
- name: restart ceph-mgr service
|
||||
systemd:
|
||||
state: restarted
|
||||
daemon_reload: yes
|
||||
name: "{{ item }}"
|
||||
loop: "{{mgr_service.stdout_lines}}"
|
||||
when: mgr_service.stdout != ""
|
||||
|
||||
@@ -0,0 +1,27 @@
|
||||
---
|
||||
- hosts: controllers
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
|
||||
tasks:
|
||||
|
||||
- name: Add hosts entry
|
||||
lineinfile:
|
||||
path: /etc/hosts
|
||||
line: "{{ item.hosts }}"
|
||||
with_items:
|
||||
- { hosts: '172.17.2.54 bonchvisor04' }
|
||||
- { hosts: '172.17.2.55 bonchvisor05' }
|
||||
- { hosts: '172.17.2.56 bonchvisor06' }
|
||||
- { hosts: '172.17.2.57 bonchvisor07' }
|
||||
- { hosts: '172.17.2.58 bonchvisor08' }
|
||||
- { hosts: '172.17.2.59 bonchvisor09' }
|
||||
- { hosts: '172.17.2.60 bonchvisor10' }
|
||||
- { hosts: '172.17.2.61 bonchvisor11' }
|
||||
- { hosts: '172.17.2.62 bonchvisor12' }
|
||||
- { hosts: '172.17.3.50 controller-ceph' }
|
||||
- { hosts: '172.17.3.100 controller-virt' }
|
||||
- { hosts: '172.17.3.200 controller-net' }
|
||||
|
||||
@@ -0,0 +1,11 @@
|
||||
bonchvisor04
|
||||
bonchvisor05
|
||||
bonchvisor06
|
||||
bonchvisor07
|
||||
bonchvisor08
|
||||
bonchvisor09
|
||||
bonchvisor10
|
||||
bonchvisor11
|
||||
bonchvisor12
|
||||
bonchvisor13
|
||||
bonchvisor14
|
||||
@@ -0,0 +1,78 @@
|
||||
---
|
||||
- hosts: bonchvisors-small
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
|
||||
tasks:
|
||||
# - name: change MTU in br0 interface
|
||||
# lineinfile:
|
||||
# path: /etc/sysconfig/network-scripts/ifcfg-br0
|
||||
# line: 'MTU=9000'
|
||||
# - name: change MTU in br1 interface
|
||||
# lineinfile:
|
||||
# path: /etc/sysconfig/network-scripts/ifcfg-br1
|
||||
# line: 'MTU=9000'
|
||||
- name: change MTU in bond interface
|
||||
lineinfile:
|
||||
path: /etc/sysconfig/network-scripts/ifcfg-bond0
|
||||
line: 'MTU=9000'
|
||||
# - name: restart network service
|
||||
# systemd:
|
||||
# state: restarted
|
||||
# daemon_reload: yes
|
||||
# name: network
|
||||
- name: Find 10Gbit network files
|
||||
find:
|
||||
paths: /etc/sysconfig/network-scripts/
|
||||
patterns: "ifcfg-enp*"
|
||||
register: files_matched
|
||||
# - debug:
|
||||
# msg: "{{ files_matched.files[0].path }}"
|
||||
|
||||
# - name: delete unproper ethtool options 1st device
|
||||
# lineinfile:
|
||||
# path: "{{ files_matched.files[0].path }}"
|
||||
# line: '-K ${DEVICE} rx off tx off; -K ${DEVICE} tso off; -K ${DEVICE} gso off'
|
||||
# state: absent
|
||||
#
|
||||
# - name: delete unproper ethtool options 2nd device
|
||||
# lineinfile:
|
||||
# path: "{{ files_matched.files[1].path }}"
|
||||
# line: '-K ${DEVICE} rx off tx off; -K ${DEVICE} tso off; -K ${DEVICE} gso off'
|
||||
# state: absent
|
||||
|
||||
- name: copy vlan165 file
|
||||
copy:
|
||||
src: /etc/ansible/files/ifcfg-vlan165
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-vlan165
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: copy br2 file
|
||||
copy:
|
||||
src: /etc/ansible/files/ifcfg-br2
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-br2
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: Change ethtool options 1st device
|
||||
lineinfile:
|
||||
path: "{{ files_matched.files[0].path }}"
|
||||
line: 'ETHTOOL_OPTS="-K ${DEVICE} rx off tx off; -K ${DEVICE} tso off; -K ${DEVICE} gso off"'
|
||||
|
||||
- name: Change ethtool options 2nd device
|
||||
lineinfile:
|
||||
path: "{{ files_matched.files[1].path }}"
|
||||
line: 'ETHTOOL_OPTS="-K ${DEVICE} rx off tx off; -K ${DEVICE} tso off; -K ${DEVICE} gso off"'
|
||||
|
||||
|
||||
|
||||
- name: restart network service
|
||||
systemd:
|
||||
state: restarted
|
||||
daemon_reload: yes
|
||||
name: network
|
||||
@@ -0,0 +1,145 @@
|
||||
---
|
||||
- hosts: bonchvisors
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
|
||||
tasks:
|
||||
|
||||
# - name: install openstack nova compute elements
|
||||
# yum:
|
||||
# name: "{{ packages }}"
|
||||
# state: latest
|
||||
# vars:
|
||||
# packages:
|
||||
# - openstack-neutron-linuxbridge
|
||||
# - ebtables
|
||||
# - ipset
|
||||
# - openstack-nova-compute
|
||||
# - openstack-neutron-ml2
|
||||
# - openstack-neutron-openvswitch
|
||||
|
||||
|
||||
- name: install snmp tool
|
||||
yum:
|
||||
name: "net-snmp"
|
||||
state: latest
|
||||
|
||||
|
||||
# - name: restart openvswitch services
|
||||
# systemd:
|
||||
# state: restarted
|
||||
# enabled: yes
|
||||
# daemon_reload: yes
|
||||
# name: openvswitch.service
|
||||
|
||||
- name: get public ip address
|
||||
shell: echo 172.17.2.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: public_ip
|
||||
|
||||
- name: get private ip address
|
||||
shell: echo 172.17.3.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: private_ip
|
||||
|
||||
- name: get tunnel ip address
|
||||
shell: echo 172.17.1.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: tunnel_ip
|
||||
|
||||
# - name: create neutron config file
|
||||
# template:
|
||||
# src: /etc/ansible/files/openvswitch_agent.ini
|
||||
# dest: /etc/neutron/plugins/ml2/openvswitch_agent.ini
|
||||
# owner: root
|
||||
# group: root
|
||||
# mode: 0644
|
||||
|
||||
# add snmp firewall port
|
||||
|
||||
- firewalld:
|
||||
immediate: yes
|
||||
port: 161/udp
|
||||
permanent: true
|
||||
state: enabled
|
||||
|
||||
- name: create snmpd config file
|
||||
template:
|
||||
src: /etc/ansible/files/snmpd.conf
|
||||
dest: /etc/snmp/snmpd.conf
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: create nova config file
|
||||
template:
|
||||
src: /etc/ansible/files/nova.conf
|
||||
dest: /etc/nova/nova.conf
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: create neutron config file
|
||||
template:
|
||||
src: /etc/ansible/files/neutron.conf
|
||||
dest: /etc/neutron/neutron.conf
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: create ml2_conf.ini file
|
||||
template:
|
||||
src: /etc/ansible/files/ml2_conf.ini
|
||||
dest: /etc/neutron/plugins/ml2/ml2_conf.ini
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: create openvswitch_agent.ini file
|
||||
template:
|
||||
src: /etc/ansible/files/openvswitch_agent.ini
|
||||
dest: /etc/neutron/plugins/ml2/openvswitch_agent.ini
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: create ceilometer config file
|
||||
template:
|
||||
src: /etc/ansible/files/ceilometer.conf
|
||||
dest: /etc/ceilometer/ceilometer.conf
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: restart openstack-ceilometer-compute
|
||||
systemd:
|
||||
state: restarted
|
||||
enabled: yes
|
||||
daemon_reload: yes
|
||||
name: openstack-ceilometer-compute
|
||||
|
||||
- name: restart openstack-nova-compute
|
||||
systemd:
|
||||
state: restarted
|
||||
enabled: yes
|
||||
daemon_reload: yes
|
||||
name: openstack-nova-compute
|
||||
|
||||
- name: restart neutron-openvswitch-agent
|
||||
systemd:
|
||||
state: restarted
|
||||
enabled: yes
|
||||
daemon_reload: yes
|
||||
name: neutron-openvswitch-agent
|
||||
|
||||
- name: restart snmpd
|
||||
systemd:
|
||||
state: restarted
|
||||
enabled: yes
|
||||
daemon_reload: yes
|
||||
name: snmpd
|
||||
@@ -0,0 +1,69 @@
|
||||
---
|
||||
- hosts: bonchvisors-dpdk
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
|
||||
tasks:
|
||||
|
||||
# - name: install openstack nova compute elements
|
||||
# yum:
|
||||
# name: "{{ packages }}"
|
||||
# state: latest
|
||||
# vars:
|
||||
# packages:
|
||||
# - openstack-neutron-linuxbridge
|
||||
# - ebtables
|
||||
# - ipset
|
||||
# - openstack-nova-compute
|
||||
# - openstack-neutron-ml2
|
||||
# - openstack-neutron-openvswitch
|
||||
|
||||
|
||||
# - name: restart openvswitch services
|
||||
# systemd:
|
||||
# state: restarted
|
||||
# enabled: yes
|
||||
# daemon_reload: yes
|
||||
# name: openvswitch.service
|
||||
|
||||
- name: get public ip address
|
||||
shell: echo 172.17.2.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: public_ip
|
||||
|
||||
- name: get private ip address
|
||||
shell: echo 172.17.3.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: private_ip
|
||||
|
||||
- name: configure kernel
|
||||
default_hugepagesz=2M hugepagesz=2M hugepages=2048 iommu=pt intel_iommu=on isolcpus=3-5"q
|
||||
|
||||
- name: create openvswitch_agent.ini config file
|
||||
template:
|
||||
src: /etc/ansible/files/openvswitch_agent.ini
|
||||
dest: /etc/neutron/plugins/ml2/openvswitch_agent.ini
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
|
||||
- name: create ml2_conf.ini config file
|
||||
template:
|
||||
src: /etc/ansible/files/ml2_conf.ini
|
||||
dest: /etc/neutron/plugins/ml2/ml2_conf.ini
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: create nova.conf config file
|
||||
template:
|
||||
src: /etc/ansible/files/nova.conf
|
||||
dest: /etc/nova/nova.conf
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
@@ -0,0 +1,225 @@
|
||||
---
|
||||
- hosts: bonchvisors
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
|
||||
tasks:
|
||||
|
||||
# - name: install openstack nova compute elements
|
||||
# yum:
|
||||
# name: "{{ packages }}"
|
||||
# state: latest
|
||||
# vars:
|
||||
# packages:
|
||||
# - openstack-neutron-linuxbridge
|
||||
# - ebtables
|
||||
# - ipset
|
||||
# - openstack-nova-compute
|
||||
# - openstack-neutron-ml2
|
||||
# - openstack-neutron-openvswitch
|
||||
|
||||
|
||||
# - name: restart openvswitch services
|
||||
# systemd:
|
||||
# state: restarted
|
||||
# enabled: yes
|
||||
# daemon_reload: yes
|
||||
# name: openvswitch.service
|
||||
|
||||
- name: get public ip address
|
||||
shell: echo 172.17.2.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: public_ip
|
||||
|
||||
- name: get private ip address
|
||||
shell: echo 172.17.3.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: private_ip
|
||||
|
||||
- name: get first interface name
|
||||
shell: "ip a | grep enp | awk 'NR==1{print $2}' | tr -d :"
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: firstport
|
||||
|
||||
- name: get second interface name
|
||||
shell: "ip a | grep enp | awk 'NR==2{print $2}' | tr -d :"
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: secondport
|
||||
|
||||
- name: collect old ifcfg-files
|
||||
shell: ls /etc/sysconfig/network-scripts/ | grep ifcfg | grep -v 'ifcfg-lo\|ifcfg-ens1f0\|ens1f1' | awk '{print $1}'
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: oldint
|
||||
|
||||
- name: delete old interface files
|
||||
file:
|
||||
state: absent
|
||||
path: /etc/sysconfig/network-scripts/{{ item }}
|
||||
loop: "{{oldint.stdout_lines}}"
|
||||
when: oldint.stdout != ""
|
||||
|
||||
- name: cretae ifcfg-{{ firstport.stdout }} network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-physicalif01
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-{{ firstport.stdout }}
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: cretae ifcfg-{{ secondport.stdout }} network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-physicalif02
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-{{ secondport.stdout }}
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: cretae bond0 network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-bond0
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-bond0
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: cretae main bridge network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-br-ext-main
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-br-ext-main
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: cretae mgmt0 network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-mgmt0
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-mgmt0
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: create internal port config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-port-int
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-port-int
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
# - name: creat first externalbridge patchpanel network config file
|
||||
# template:
|
||||
# src: /etc/ansible/files/networks/ifcfg-patch-main-ext01
|
||||
# dest: /etc/sysconfig/network-scripts/ifcfg-patch-main-ext01
|
||||
# owner: root
|
||||
# group: root
|
||||
# mode: 0644
|
||||
|
||||
|
||||
# - name: creat second external bridge patchpanel network config file
|
||||
# template:
|
||||
# src: /etc/ansible/files/networks/ifcfg-patch-main-ext02
|
||||
# dest: /etc/sysconfig/network-scripts/ifcfg-patch-main-ext02
|
||||
# owner: root
|
||||
# group: root
|
||||
# mode: 0644
|
||||
|
||||
- name: creat slave bridge patchpanel network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-patch-main-slave
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-patch-main-slave
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: create neutron config file
|
||||
template:
|
||||
src: /etc/ansible/files/openvswitch_agent.ini
|
||||
dest: /etc/neutron/plugins/ml2/openvswitch_agent.ini
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: restart all network services and delete all ovs bridge
|
||||
shell: ls /etc/sysconfig/network-scripts/ | grep ifcfg | grep -v 'ifcfg-lo\|ifcfg-ens1f0\|ens1f1\|enp\|bond0' | awk '{print $1}' | sed 's/ifcfg-//g'| while read line; do ip link set dev $line down && ip link delete $line; done; ovs-vsctl list-br | awk "{print $1}" | while read line; do ovs-vsctl --if-exist del-br $line; done; systemctl restart network; systemctl restart network
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
|
||||
#slave bridge creation
|
||||
|
||||
|
||||
|
||||
|
||||
# - name: detect all bridges, except ovs-main
|
||||
# shell: ovs-vsctl list-br | grep -v "ovs-main" | awk "{print $1}"
|
||||
# args:
|
||||
# executable: /bin/bash
|
||||
# register: oldbridges
|
||||
|
||||
# - name: clear all bridges, except ovs-main
|
||||
# shell: ovs-vsctl --if-exist del-br {{ item }}
|
||||
# args:
|
||||
# executable: /bin/bash
|
||||
# loop: "{{oldbridges.stdout_lines}}"
|
||||
# when: oldbridges.stdout != ""
|
||||
|
||||
- name: create slave bridge
|
||||
shell: ovs-vsctl --may-exist add-br br-slave && ovs-vsctl set int br-slave mtu_request=9000
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: create fake management bridge
|
||||
shell: ovs-vsctl --may-exist add-br br-mgmt-fake br-slave 162 && ovs-vsctl set int br-mgmt-fake mtu_request=9000
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: create fake interconnect bridge
|
||||
shell: ovs-vsctl --may-exist add-br br-ic-fake br-slave 163 && ovs-vsctl set int br-ic-fake mtu_request=9000
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: create patchport -- br-slave to br-ext-main
|
||||
shell: ovs-vsctl --may-exist add-port br-slave patch-slave-main && ovs-vsctl set int patch-slave-main mtu_request=9000
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: connect patchport -- br-slave to br-ext-main
|
||||
shell: ovs-vsctl set interface patch-slave-main type=patch options:peer=patch-main-slave
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: create external bridge
|
||||
shell: ovs-vsctl --may-exist add-br br-ext && ovs-vsctl set int br-ext mtu_request=9000
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: create patchport -- br-ext to br-ext-main
|
||||
shell: ovs-vsctl --may-exist add-port br-ext patch-ext-main && ovs-vsctl set int patch-ext-main mtu_request=8996
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: connect patchport -- br-ext to br-ext-main
|
||||
shell: ovs-vsctl set interface patch-ext-main type=patch options:peer=patch-main-ext
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: restart neutron-openvswitch
|
||||
systemd:
|
||||
state: restarted
|
||||
enabled: yes
|
||||
daemon_reload: yes
|
||||
name: neutron-openvswitch-agent.service
|
||||
|
||||
# postconfig
|
||||
#
|
||||
# - name: set physical interface MTU
|
||||
# shell: ovs-vsctl set int {{ firstport.stdout }} mtu_request=9000 && ovs-vsctl set int {{ secondport.stdout }} mtu_request=9000
|
||||
# args:
|
||||
# executable: /bin/bash
|
||||
@@ -0,0 +1,188 @@
|
||||
---
|
||||
- hosts: bonchvisors
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
|
||||
tasks:
|
||||
|
||||
# - name: install openstack nova compute elements
|
||||
# yum:
|
||||
# name: "{{ packages }}"
|
||||
# state: latest
|
||||
# vars:
|
||||
# packages:
|
||||
# - openstack-neutron-linuxbridge
|
||||
# - ebtables
|
||||
# - ipset
|
||||
# - openstack-nova-compute
|
||||
# - openstack-neutron-ml2
|
||||
# - openstack-neutron-openvswitch
|
||||
|
||||
|
||||
# - name: restart openvswitch services
|
||||
# systemd:
|
||||
# state: restarted
|
||||
# enabled: yes
|
||||
# daemon_reload: yes
|
||||
# name: openvswitch.service
|
||||
|
||||
- name: get public ip address
|
||||
shell: echo 172.17.2.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: public_ip
|
||||
|
||||
- name: get private ip address
|
||||
shell: echo 172.17.3.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: private_ip
|
||||
|
||||
- name: get first interface name
|
||||
shell: "ip a | grep enp | awk 'NR==1{print $2}' | tr -d :"
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: firstport
|
||||
|
||||
- name: get second interface name
|
||||
shell: "ip a | grep enp | awk 'NR==2{print $2}' | tr -d :"
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: secondport
|
||||
|
||||
- name: collect old ifcfg-files
|
||||
shell: ls /etc/sysconfig/network-scripts/ | grep ifcfg | grep -v 'ifcfg-lo\|ifcfg-ens1f0\|ens1f1' | awk '{print $1}'
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: oldint
|
||||
|
||||
- name: delete old interface files
|
||||
file:
|
||||
state: absent
|
||||
path: /etc/sysconfig/network-scripts/{{ item }}
|
||||
loop: "{{oldint.stdout_lines}}"
|
||||
when: oldint.stdout != ""
|
||||
|
||||
- name: cretae ifcfg-{{ firstport.stdout }} network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-physicalif01
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-{{ firstport.stdout }}
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: cretae ifcfg-{{ secondport.stdout }} network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-physicalif02
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-{{ secondport.stdout }}
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: cretae bond0 network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-bond0
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-bond0
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: cretae main bridge network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-main-bridge
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-ovs-main
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: cretae mgmt0 network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-mgmt0
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-mgmt0
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: create main bridge network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-port-int
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-port-int
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: create patchpanel network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-ovs-patch0
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-ovs-patch0
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: create neutron config file
|
||||
template:
|
||||
src: /etc/ansible/files/openvswitch_agent.ini
|
||||
dest: /etc/neutron/plugins/ml2/openvswitch_agent.ini
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
#slave bridge creation
|
||||
|
||||
|
||||
|
||||
- name: create ovs-slave bridge
|
||||
shell: ovs-vsctl --may-exist add-br ovs-slave && ovs-vsctl set int ovs-slave mtu_request=9000
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: create management bridge
|
||||
shell: ovs-vsctl --may-exist add-br br-mgmt ovs-slave 162 && ovs-vsctl set int br-mgmt mtu_request=9000
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: create internal bridge
|
||||
shell: ovs-vsctl --may-exist add-br br-ic ovs-slave 163 && ovs-vsctl set int br-ic mtu_request=9000
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: create first external bridge
|
||||
shell: ovs-vsctl --may-exist add-br br-ext01 ovs-slave 160 && ovs-vsctl set int br-ext01 mtu_request=9000
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: create second external bridge
|
||||
shell: ovs-vsctl --may-exist add-br br-ext02 ovs-slave 165 && ovs-vsctl set int br-ext02 mtu_request=9000
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: create patchport to ovs-main
|
||||
shell: ovs-vsctl --may-exist add-port ovs-slave patch1 && ovs-vsctl set int patch1 mtu_request=9000
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: connect patchport to ovs-main
|
||||
shell: ovs-vsctl set interface patch1 type=patch options:peer=patch0
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: restart network services
|
||||
shell: ls /etc/sysconfig/network-scripts/ | grep ifcfg | grep -v 'ifcfg-lo\|ifcfg-ens1f0\|ens1f1\|enp' | awk '{print $1}' | sed 's/ifcfg-//g'| while read line; do ip link set dev $line down && ip link delete $line; done && systemctl restart network; systemctl restart network
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: restart neutron-openvswitch
|
||||
systemd:
|
||||
state: restarted
|
||||
enabled: yes
|
||||
daemon_reload: yes
|
||||
name: neutron-openvswitch-agent.service
|
||||
|
||||
# postconfig
|
||||
|
||||
- name: set physical interface MTU
|
||||
shell: ovs-vsctl set int {{ firstport.stdout }} mtu_request=9000 && ovs-vsctl set int {{ secondport.stdout }} mtu_request=9000
|
||||
args:
|
||||
executable: /bin/bash
|
||||
@@ -0,0 +1,37 @@
|
||||
---
|
||||
- hosts: bonchvisors
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
|
||||
tasks:
|
||||
|
||||
- name: create libvirtd.conf file
|
||||
template:
|
||||
src: /etc/ansible/files/libvirtd.conf
|
||||
dest: /etc/libvirt/libvirtd.conf
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: cretae libvirtd file for port listening
|
||||
template:
|
||||
src: /etc/ansible/files/libvirtd
|
||||
dest: /etc/sysconfig/libvirtd
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: cretae firewalld rule
|
||||
shell: firewall-cmd --add-port 49152-49216/tcp --permanent; firewall-cmd --add-port 16509/tcp --permanent; firewall-cmd --reload
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: restart libvirtd
|
||||
systemd:
|
||||
state: restarted
|
||||
enabled: yes
|
||||
daemon_reload: yes
|
||||
name: libvirtd.service
|
||||
|
||||
@@ -0,0 +1,32 @@
|
||||
---
|
||||
- hosts: bonchvisors
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
|
||||
tasks:
|
||||
tasks:
|
||||
|
||||
- name: create nested-vm enabling file
|
||||
copy:
|
||||
src: /etc/ansible/files/kvm-nested.conf
|
||||
dest: /etc/modprobe.d/kvm-nested.conf
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: disable && enable kvm_intel module
|
||||
shell: modprobe -r kvm_intel && modprobe -a kvm_intel
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: check nested vm enabled
|
||||
shell: cat /sys/module/kvm_intel/parameters/nested
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: nested_vm
|
||||
|
||||
- name: get nested vm enabled state
|
||||
debug:
|
||||
msg: "{{ nested_vm.stdout }}"
|
||||
@@ -0,0 +1,42 @@
|
||||
---
|
||||
- hosts: bonchvisors
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
|
||||
tasks:
|
||||
|
||||
- name: enable isolcpu and hugepages in kernel
|
||||
shell: grep GRUB_CMDLINE_LINUX /etc/default/grub | grep -c "hugepages" || true
|
||||
register: hugepages_status
|
||||
ignore_errors: true
|
||||
|
||||
- name: enable isolcpu in kernel
|
||||
shell: grep GRUB_CMDLINE_LINUX /etc/default/grub | grep -c "isolcpus" || true
|
||||
register: isolcpu_status
|
||||
ignore_errors: true
|
||||
|
||||
- name: Enable isolcpu in grub
|
||||
lineinfile: dest="/etc/default/grub" regexp='GRUB_CMDLINE_LINUX="(.*)"' line='GRUB_CMDLINE_LINUX="\1 isolcpus=2-3"' backrefs=yes
|
||||
when: isolcpu_status.stdout == "0"
|
||||
|
||||
- name: Enable hugepages in grub
|
||||
lineinfile: dest="/etc/default/grub" regexp='GRUB_CMDLINE_LINUX="(.*)"' line='GRUB_CMDLINE_LINUX="\1 hugepages=512"' backrefs=yes
|
||||
when: hugepages_status.stdout == "0"
|
||||
|
||||
- name: check if hugepages fstab entry exist
|
||||
shell: grep "^hugetlbfs" /etc/fstab || true
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: test_grep
|
||||
|
||||
- name: test_grep results
|
||||
debug:
|
||||
msg: "{{ test_grep.stdout }}"
|
||||
|
||||
- name: modify fstab
|
||||
lineinfile:
|
||||
path: /etc/fstab
|
||||
line: "nodev /mnt/huge hugetlbfs defaults 0 0"
|
||||
when: test_grep.stdout == ""
|
||||
@@ -0,0 +1,318 @@
|
||||
---
|
||||
- hosts: bonchvisor04
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
|
||||
tasks:
|
||||
|
||||
- name: install repos
|
||||
yum:
|
||||
name: "{{ packages }}"
|
||||
state: latest
|
||||
vars:
|
||||
packages:
|
||||
- epel-release
|
||||
- https://rdoproject.org/repos/rdo-release.rpm
|
||||
- https://download.ceph.com/rpm-luminous/el7/noarch/ceph-release-1-1.el7.noarch.rpm
|
||||
|
||||
|
||||
- name: install initial components
|
||||
yum:
|
||||
name: "{{ packages }}"
|
||||
state: latest
|
||||
vars:
|
||||
packages:
|
||||
- net-tools
|
||||
- chrony
|
||||
- openvswitch
|
||||
- qemu-kvm
|
||||
- virt-install
|
||||
- libvirt
|
||||
- libvirt-python
|
||||
- virt-manager
|
||||
- policycoreutils-python
|
||||
- libibverbs
|
||||
- driverctl
|
||||
- libguestfs-tools
|
||||
- python2-pip
|
||||
|
||||
- name: get public ip address
|
||||
shell: echo 172.17.1.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: public_ip
|
||||
|
||||
- name: get private ip address
|
||||
shell: echo 172.17.2.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: private_ip
|
||||
|
||||
- name: get tun ip address
|
||||
shell: echo 172.17.3.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: tun_ip
|
||||
|
||||
- name: get first interface name
|
||||
shell: "ip a | grep enp | awk 'NR==1{print $2}' | tr -d :"
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: firstport
|
||||
|
||||
- name: get second interface name
|
||||
shell: "ip a | grep enp | awk 'NR==2{print $2}' | tr -d :"
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: secondport
|
||||
|
||||
- name: Add hosts entry
|
||||
lineinfile:
|
||||
path: /etc/hosts
|
||||
line: "{{ item.hosts }}"
|
||||
with_items:
|
||||
- { hosts: '172.17.2.54 bonchvisor04' }
|
||||
- { hosts: '172.17.2.55 bonchvisor05' }
|
||||
- { hosts: '172.17.2.56 bonchvisor06' }
|
||||
- { hosts: '172.17.2.57 bonchvisor07' }
|
||||
- { hosts: '172.17.2.58 bonchvisor08' }
|
||||
- { hosts: '172.17.2.59 bonchvisor09' }
|
||||
- { hosts: '172.17.2.60 bonchvisor10' }
|
||||
- { hosts: '172.17.2.61 bonchvisor11' }
|
||||
- { hosts: '172.17.2.62 bonchvisor12' }
|
||||
- { hosts: '172.17.2.50 controller-ceph' }
|
||||
- { hosts: '172.17.2.100 controller-virt' }
|
||||
- { hosts: '172.17.2.200 controller-net' }
|
||||
|
||||
- name: copy chrony file
|
||||
copy:
|
||||
src: /etc/ansible/files/chrony.conf
|
||||
dest: /etc/chrony.conf
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0640
|
||||
|
||||
- name: insert uio_pci_generic module
|
||||
shell: modprobe uio_pci_generic
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: copy uio_pci_generic module file to autostart
|
||||
copy: src=/etc/ansible/files/dpdk.conf dest=/etc/modules-load.d/dpdk.conf owner=root group=root mode=0640
|
||||
|
||||
- name: detect dpdk interface name
|
||||
shell: driverctl -v list-devices | grep -i net | grep 82576 | awk '{print $1}'
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: dpdk_bus
|
||||
|
||||
- name: change dpdk device#1 driver
|
||||
shell: driverctl set-override {{ dpdk_bus.stdout_lines[0] }} uio_pci_generic
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: change dpdk device#2 driver
|
||||
shell: driverctl set-override {{ dpdk_bus.stdout_lines[1] }} uio_pci_generic
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: upload selinux modules
|
||||
copy: src=/etc/ansible/files/{{ item }} dest=/tmp owner=root group=root mode=0640
|
||||
with_items:
|
||||
- ovs-vswitchd.pp
|
||||
- ovsdb-server.pp
|
||||
|
||||
- name: install selinux modules
|
||||
shell: semodule -i /tmp/{{ item }}
|
||||
with_items:
|
||||
- ovs-vswitchd.pp
|
||||
- ovsdb-server.pp
|
||||
|
||||
- name: copy grub file to load hugepages
|
||||
copy: src=/etc/ansible/files/grub dest=/etc/default owner=root group=root mode=0640
|
||||
|
||||
- name: modify grub to load hugepages
|
||||
shell: grub2-mkconfig -o /boot/efi/EFI/centos/grub.cfg
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: check if hugepages fstab entry exist
|
||||
shell: grep "^hugetlbfs" /etc/fstab || true
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: test_grep
|
||||
|
||||
- name: modify fstab
|
||||
lineinfile:
|
||||
path: /etc/grub
|
||||
line: 'nodev /mnt/huge hugetlbfs defaults 0 0'
|
||||
when: test_grep.stdout != ""
|
||||
|
||||
- name: Creates directory
|
||||
file:
|
||||
path: /mnt/huge
|
||||
state: directory
|
||||
|
||||
- name: copy systemd service file to use hugepages on node0
|
||||
copy:
|
||||
src: /etc/ansible/files/hugetlb-gigantic-pages.service
|
||||
dest: /usr/lib/systemd/system/hugetlb-gigantic-pages.service
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0640
|
||||
|
||||
- name: copy bash script file to use hugepages
|
||||
copy:
|
||||
src: /etc/ansible/files/hugetlb-reserve-pages.sh
|
||||
dest: /usr/lib/systemd/hugetlb-reserve-pages.sh
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0750
|
||||
|
||||
- name: modify openvswitch startup users
|
||||
replace:
|
||||
path: /etc/sysconfig/openvswitch
|
||||
regexp: '^OVS_USER_ID(.*)$'
|
||||
replace: 'OVS_USER_ID="root:root"'
|
||||
|
||||
- name: enable and start libvirtd services
|
||||
systemd:
|
||||
state: started
|
||||
enabled: yes
|
||||
daemon_reload: yes
|
||||
name: libvirtd.service
|
||||
|
||||
- name: enable and start chronyd services
|
||||
systemd:
|
||||
state: started
|
||||
enabled: yes
|
||||
daemon_reload: yes
|
||||
name: chronyd.service
|
||||
|
||||
|
||||
- name: enable and start service hugetlb-gigantic-pages
|
||||
systemd:
|
||||
state: started
|
||||
name: hugetlb-gigantic-pages
|
||||
enabled: yes
|
||||
daemon_reload: yes
|
||||
|
||||
- name: enable and start opevswitchd
|
||||
systemd:
|
||||
state: started
|
||||
name: openvswitch
|
||||
enabled: yes
|
||||
|
||||
- name: ovs enable dpdk
|
||||
shell: ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-init="true"
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: ovs dpdk config cpu mask
|
||||
shell: ovs-vsctl --no-wait set Open_vSwitch . other_config:pmd-cpu-mask=0x4
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: ovs dpdk config memory usage
|
||||
shell: ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-socket-mem="1024,0"
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: config dpdk port
|
||||
shell: ovs-vsctl --may-exist add-br br-dpdk -- set bridge br-dpdk datapath_type=netdev
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: add dpdk port
|
||||
shell: ovs-vsctl --may-exist add-bond br-dpdk dpdkbond p0 p1 lacp=active bond_mode=balance-tcp
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: add dpdk port
|
||||
shell: ovs-vsctl set Interface p0 type=dpdk options:dpdk-devargs={{ dpdk_bus.stdout_lines[0] }}
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: add dpdk port
|
||||
shell: ovs-vsctl set Interface p1 type=dpdk options:dpdk-devargs={{ dpdk_bus.stdout_lines[1] }}
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: collect old ifcfg-files
|
||||
shell: ls /etc/sysconfig/network-scripts/ | grep ifcfg | grep -v 'ifcfg-lo\|ifcfg-ens1f0\|ens1f1' | awk '{print $1}'
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: oldint
|
||||
|
||||
- name: delete old interface files
|
||||
file:
|
||||
state: absent
|
||||
path: /etc/sysconfig/network-scripts/{{ item }}
|
||||
loop: "{{oldint.stdout_lines}}"
|
||||
when: oldint.stdout != ""
|
||||
|
||||
- name: cretae ifcfg-{{ firstport.stdout }} network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-physicalif01
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-{{ firstport.stdout }}
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: cretae ifcfg-{{ secondport.stdout }} network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-physicalif02
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-{{ secondport.stdout }}
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: create bond0 network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-bond0
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-bond0
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: cretae main bridge network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-br-ext-main
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-br-ext-main
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: cretae mgmt0 network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-mgmt0
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-mgmt0
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: create int port network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-port-int
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-port-int
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: create tun port network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-port-tun
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-port-tun
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: remove NetworkManager
|
||||
yum:
|
||||
name: NetworkManager*
|
||||
state: absent
|
||||
|
||||
# - name: reboot to apply grub changes
|
||||
# reboot:
|
||||
@@ -0,0 +1,333 @@
|
||||
---
|
||||
- hosts: bonchvisor10
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
|
||||
tasks:
|
||||
|
||||
- name: install repos
|
||||
yum:
|
||||
name: "{{ packages }}"
|
||||
state: latest
|
||||
vars:
|
||||
packages:
|
||||
- epel-release
|
||||
- https://rdoproject.org/repos/rdo-release.rpm
|
||||
- https://download.ceph.com/rpm-luminous/el7/noarch/ceph-release-1-1.el7.noarch.rpm
|
||||
|
||||
|
||||
- name: install initial components
|
||||
yum:
|
||||
name: "{{ packages }}"
|
||||
state: latest
|
||||
vars:
|
||||
packages:
|
||||
- net-tools
|
||||
- chrony
|
||||
- openvswitch
|
||||
- qemu-kvm
|
||||
- virt-install
|
||||
- libvirt
|
||||
- libvirt-python
|
||||
- virt-manager
|
||||
- policycoreutils-python
|
||||
- libibverbs
|
||||
- driverctl
|
||||
- libguestfs-tools
|
||||
- python2-pip
|
||||
|
||||
- name: get public ip address
|
||||
shell: echo 172.17.1.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: public_ip
|
||||
|
||||
- name: get private ip address
|
||||
shell: echo 172.17.2.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: private_ip
|
||||
|
||||
- name: get tun ip address
|
||||
shell: echo 172.17.3.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: tun_ip
|
||||
|
||||
- name: get first interface name
|
||||
shell: "ip a | grep enp | awk 'NR==1{print $2}' | tr -d :"
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: firstport
|
||||
|
||||
- name: get second interface name
|
||||
shell: "ip a | grep enp | awk 'NR==2{print $2}' | tr -d :"
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: secondport
|
||||
|
||||
- name: Add hosts entry
|
||||
lineinfile:
|
||||
path: /etc/hosts
|
||||
line: "{{ item.hosts }}"
|
||||
with_items:
|
||||
- { hosts: '172.17.2.54 bonchvisor04' }
|
||||
- { hosts: '172.17.2.55 bonchvisor05' }
|
||||
- { hosts: '172.17.2.56 bonchvisor06' }
|
||||
- { hosts: '172.17.2.57 bonchvisor07' }
|
||||
- { hosts: '172.17.2.58 bonchvisor08' }
|
||||
- { hosts: '172.17.2.59 bonchvisor09' }
|
||||
- { hosts: '172.17.2.60 bonchvisor10' }
|
||||
- { hosts: '172.17.2.61 bonchvisor11' }
|
||||
- { hosts: '172.17.2.62 bonchvisor12' }
|
||||
- { hosts: '172.17.2.50 controller-ceph' }
|
||||
- { hosts: '172.17.2.100 controller-virt' }
|
||||
- { hosts: '172.17.2.200 controller-net' }
|
||||
|
||||
- name: copy chrony file
|
||||
copy:
|
||||
src: /etc/ansible/files/chrony.conf
|
||||
dest: /etc/chrony.conf
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0640
|
||||
|
||||
- name: insert uio_pci_generic module
|
||||
shell: modprobe uio_pci_generic
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: copy uio_pci_generic module file to autostart
|
||||
copy: src=/etc/ansible/files/dpdk.conf dest=/etc/modules-load.d/dpdk.conf owner=root group=root mode=0640
|
||||
|
||||
- name: detect dpdk interface name
|
||||
shell: driverctl -v list-devices | grep -i net | grep 82576 | awk '{print $1}'
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: dpdk_bus
|
||||
|
||||
- name: change dpdk device#1 driver
|
||||
shell: driverctl set-override {{ dpdk_bus.stdout_lines[0] }} uio_pci_generic
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: change dpdk device#2 driver
|
||||
shell: driverctl set-override {{ dpdk_bus.stdout_lines[1] }} uio_pci_generic
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: upload selinux modules
|
||||
copy: src=/etc/ansible/files/{{ item }} dest=/tmp owner=root group=root mode=0640
|
||||
with_items:
|
||||
- ovs-vswitchd.pp
|
||||
- ovsdb-server.pp
|
||||
|
||||
- name: install selinux modules
|
||||
shell: semodule -i /tmp/{{ item }}
|
||||
with_items:
|
||||
- ovs-vswitchd.pp
|
||||
- ovsdb-server.pp
|
||||
|
||||
- name: enable isolcpu and hugepages in kernel
|
||||
shell: grep GRUB_CMDLINE_LINUX /etc/default/grub | grep -c "hugepages" || true
|
||||
register: hugepages_status
|
||||
ignore_errors: true
|
||||
|
||||
- name: enable isolcpu in kernel
|
||||
shell: grep GRUB_CMDLINE_LINUX /etc/default/grub | grep -c "isolcpus" || true
|
||||
register: isolcpu_status
|
||||
ignore_errors: true
|
||||
|
||||
- name: Enable isolcpu in grub
|
||||
lineinfile: dest="/etc/default/grub" regexp='GRUB_CMDLINE_LINUX="(.*)"' line='GRUB_CMDLINE_LINUX="\1 isolcpus=2-3"' backrefs=yes
|
||||
when: isolcpu_status.stdout == "0"
|
||||
|
||||
- name: Enable hugepages in grub
|
||||
lineinfile: dest="/etc/default/grub" regexp='GRUB_CMDLINE_LINUX="(.*)"' line='GRUB_CMDLINE_LINUX="\1 hugepages=512"' backrefs=yes
|
||||
when: hugepages_status.stdout == "0"
|
||||
|
||||
- name: modify grub to load hugepages
|
||||
shell: grub2-mkconfig -o /boot/efi/EFI/centos/grub.cfg
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: check if hugepages fstab entry exist
|
||||
shell: grep "^hugetlbfs" /etc/fstab || true
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: test_grep
|
||||
|
||||
- name: modify fstab
|
||||
lineinfile:
|
||||
path: /etc/fstab
|
||||
line: 'nodev /mnt/huge hugetlbfs defaults 0 0'
|
||||
when: test_grep.stdout == ""
|
||||
|
||||
- name: Creates directory
|
||||
file:
|
||||
path: /mnt/huge
|
||||
state: directory
|
||||
|
||||
- name: copy systemd service file to use hugepages on node0
|
||||
copy:
|
||||
src: /etc/ansible/files/hugetlb-gigantic-pages.service
|
||||
dest: /usr/lib/systemd/system/hugetlb-gigantic-pages.service
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0640
|
||||
|
||||
- name: copy bash script file to use hugepages
|
||||
copy:
|
||||
src: /etc/ansible/files/hugetlb-reserve-pages.sh
|
||||
dest: /usr/lib/systemd/hugetlb-reserve-pages.sh
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0750
|
||||
|
||||
- name: modify openvswitch startup users
|
||||
replace:
|
||||
path: /etc/sysconfig/openvswitch
|
||||
regexp: '^OVS_USER_ID(.*)$'
|
||||
replace: 'OVS_USER_ID="root:root"'
|
||||
|
||||
- name: enable and start libvirtd services
|
||||
systemd:
|
||||
state: started
|
||||
enabled: yes
|
||||
daemon_reload: yes
|
||||
name: libvirtd.service
|
||||
|
||||
- name: enable and start chronyd services
|
||||
systemd:
|
||||
state: started
|
||||
enabled: yes
|
||||
daemon_reload: yes
|
||||
name: chronyd.service
|
||||
|
||||
|
||||
- name: enable and start service hugetlb-gigantic-pages
|
||||
systemd:
|
||||
state: started
|
||||
name: hugetlb-gigantic-pages
|
||||
enabled: yes
|
||||
daemon_reload: yes
|
||||
|
||||
- name: enable and start opevswitchd
|
||||
systemd:
|
||||
state: started
|
||||
name: openvswitch
|
||||
enabled: yes
|
||||
|
||||
- name: ovs enable dpdk
|
||||
shell: ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-init="true"
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: ovs dpdk config cpu mask
|
||||
shell: ovs-vsctl --no-wait set Open_vSwitch . other_config:pmd-cpu-mask=0x4
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: ovs dpdk config memory usage
|
||||
shell: ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-socket-mem="1024,0"
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: config dpdk port
|
||||
shell: ovs-vsctl --may-exist add-br br-dpdk -- set bridge br-dpdk datapath_type=netdev
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: add dpdk port
|
||||
shell: ovs-vsctl --may-exist add-bond br-dpdk dpdkbond p0 p1 lacp=active bond_mode=balance-tcp
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: add dpdk port
|
||||
shell: ovs-vsctl set Interface p0 type=dpdk options:dpdk-devargs={{ dpdk_bus.stdout_lines[0] }}
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: add dpdk port
|
||||
shell: ovs-vsctl set Interface p1 type=dpdk options:dpdk-devargs={{ dpdk_bus.stdout_lines[1] }}
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: collect old ifcfg-files
|
||||
shell: ls /etc/sysconfig/network-scripts/ | grep ifcfg | grep -v 'ifcfg-lo\|ifcfg-ens1f0\|ens1f1' | awk '{print $1}'
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: oldint
|
||||
|
||||
- name: delete old interface files
|
||||
file:
|
||||
state: absent
|
||||
path: /etc/sysconfig/network-scripts/{{ item }}
|
||||
loop: "{{oldint.stdout_lines}}"
|
||||
when: oldint.stdout != ""
|
||||
|
||||
- name: cretae ifcfg-{{ firstport.stdout }} network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-physicalif01
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-{{ firstport.stdout }}
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: cretae ifcfg-{{ secondport.stdout }} network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-physicalif02
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-{{ secondport.stdout }}
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: create bond0 network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-bond0
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-bond0
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: cretae main bridge network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-br-ext-main
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-br-ext-main
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: cretae mgmt0 network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-mgmt0
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-mgmt0
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: create int port network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-port-int
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-port-int
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: create tun port network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-port-tun
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-port-tun
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: remove NetworkManager
|
||||
yum:
|
||||
name: NetworkManager*
|
||||
state: absent
|
||||
|
||||
- name: reboot to apply grub changes
|
||||
reboot:
|
||||
@@ -0,0 +1,27 @@
|
||||
---
|
||||
- hosts: bonchvisors
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
|
||||
tasks:
|
||||
|
||||
- name: install openstack pike repository
|
||||
yum:
|
||||
name: centos-release-openstack-pike
|
||||
state: latest
|
||||
|
||||
- name: upgrade all packages
|
||||
yum:
|
||||
name: '*'
|
||||
state: latest
|
||||
|
||||
|
||||
- name: install openstack client and selinux lib's
|
||||
yum:
|
||||
name: "{{ packages }}"
|
||||
vars:
|
||||
packages:
|
||||
- python-openstackclient
|
||||
- openstack-selinux
|
||||
@@ -0,0 +1 @@
|
||||
bonchvisor08
|
||||
@@ -0,0 +1,150 @@
|
||||
---
|
||||
- hosts: bonchvisor14
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
|
||||
tasks:
|
||||
|
||||
- name: install openstack nova compute elements
|
||||
yum:
|
||||
name: "{{ packages }}"
|
||||
state: latest
|
||||
vars:
|
||||
packages:
|
||||
- openstack-neutron-linuxbridge
|
||||
- ebtables
|
||||
- ipset
|
||||
- openstack-nova-compute
|
||||
- openstack-neutron-ml2
|
||||
- openstack-neutron-openvswitch
|
||||
|
||||
- name: get public ip address
|
||||
shell: echo 172.17.2.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: public_ip
|
||||
|
||||
- name: get private ip address
|
||||
shell: echo 172.17.3.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: private_ip
|
||||
|
||||
|
||||
- name: copy secret.xml file
|
||||
copy:
|
||||
src: /etc/ansible/files/secret.xml
|
||||
dest: /etc/ceph/secret.xml
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0640
|
||||
|
||||
- name: copy ceph.client.vms.keyring file
|
||||
copy:
|
||||
src: /etc/ansible/files/ceph.client.vms.keyring
|
||||
dest: /etc/ceph/ceph.client.vms.keyring
|
||||
owner: root
|
||||
group: nova
|
||||
mode: 0640
|
||||
|
||||
- name: copy client.cinder.key file
|
||||
copy:
|
||||
src: /etc/ansible/files/client.cinder.key
|
||||
dest: /etc/ceph/client.cinder.key
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0640
|
||||
|
||||
- name: copy vms-secret.xml file
|
||||
copy:
|
||||
src: /etc/ansible/files/vms-secret.xml
|
||||
dest: /etc/ceph/vms-secret.xml
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0640
|
||||
|
||||
- name: copy client.vms.key file
|
||||
copy:
|
||||
src: /etc/ansible/files/client.vms.key
|
||||
dest: /etc/ceph/client.vms.key
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0640
|
||||
|
||||
- name: create openvswitch_agent.ini
|
||||
template:
|
||||
src: /etc/ansible/files/openvswitch_agent.ini
|
||||
dest: /etc/neutron/plugins/ml2/openvswitch_agent.ini
|
||||
owner: root
|
||||
group: neutron
|
||||
mode: 0644
|
||||
|
||||
- name: create nova.conf
|
||||
template:
|
||||
src: /etc/ansible/files/nova.conf
|
||||
dest: /etc/nova/nova.conf
|
||||
owner: root
|
||||
group: nova
|
||||
mode: 0640
|
||||
|
||||
- name: create neutron.conf
|
||||
template:
|
||||
src: /etc/ansible/files/neutron.conf
|
||||
dest: /etc/nova/neutron.conf
|
||||
owner: root
|
||||
group: neutron
|
||||
mode: 0640
|
||||
|
||||
- name: virsh secret define
|
||||
shell: virsh secret-define --file /etc/ceph/secret.xml
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: required_uuid
|
||||
|
||||
- name: virsh secret set
|
||||
shell: virsh secret-set-value --secret $(echo {{required_uuid.stdout }} | awk '{print $2}') --base64 $(cat /etc/ceph/client.cinder.key)
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: virsh vms secret define
|
||||
shell: virsh secret-define --file /etc/ceph/vms-secret.xml
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: required_vms_uuid
|
||||
|
||||
- name: virsh vms secret set
|
||||
shell: virsh secret-set-value --secret $(echo {{ required_vms_uuid.stdout }} | awk '{print $2}') --base64 $(cat /etc/ceph/client.vms.key)
|
||||
args:
|
||||
executable: /bin/bash
|
||||
|
||||
- name: restart libvirtd services
|
||||
systemd:
|
||||
state: restarted
|
||||
enabled: yes
|
||||
daemon_reload: yes
|
||||
name: libvirtd.service
|
||||
|
||||
- name: restart nova-compute services
|
||||
systemd:
|
||||
state: restarted
|
||||
enabled: yes
|
||||
daemon_reload: yes
|
||||
name: openstack-nova-compute.service
|
||||
|
||||
- name: restart neutron-linux-brigde-agent services
|
||||
systemd:
|
||||
state: stopped
|
||||
enabled: no
|
||||
daemon_reload: yes
|
||||
name: neutron-linuxbridge-agent.service
|
||||
|
||||
- name: restart neutron-openvswitch-agent services
|
||||
systemd:
|
||||
state: restarted
|
||||
enabled: yes
|
||||
daemon_reload: yes
|
||||
name: neutron-openvswitch-agent.service
|
||||
|
||||
|
||||
@@ -0,0 +1,18 @@
|
||||
---
|
||||
- hosts: bonchvisors
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
|
||||
tasks:
|
||||
|
||||
- name: get controller mode
|
||||
shell: "lspci | grep AHCI"
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: AHCI_present
|
||||
|
||||
- name: get ahci present
|
||||
debug:
|
||||
msg: "{{ AHCI_present.stdout }}"
|
||||
@@ -0,0 +1,173 @@
|
||||
---
|
||||
- hosts: bonchvisor09
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
|
||||
tasks:
|
||||
|
||||
# - name: install openstack nova compute elements
|
||||
# yum:
|
||||
# name: "{{ packages }}"
|
||||
# state: latest
|
||||
# vars:
|
||||
# packages:
|
||||
# - openstack-neutron-linuxbridge
|
||||
# - ebtables
|
||||
# - ipset
|
||||
# - openstack-nova-compute
|
||||
# - openstack-neutron-ml2
|
||||
# - openstack-neutron-openvswitch
|
||||
|
||||
|
||||
- name: restart openvswitch services
|
||||
systemd:
|
||||
state: restarted
|
||||
enabled: yes
|
||||
daemon_reload: yes
|
||||
name: openvswitch.service
|
||||
|
||||
- name: get public ip address
|
||||
shell: echo 172.17.2.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: public_ip
|
||||
|
||||
- name: get private ip address
|
||||
shell: echo 172.17.3.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: private_ip
|
||||
|
||||
- name: get first interface name
|
||||
shell: "ip a | grep enp | awk 'NR==1{print $2}' | tr -d :"
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: firstport
|
||||
|
||||
- name: get second interface name
|
||||
shell: "ip a | grep enp | awk 'NR==2{print $2}' | tr -d :"
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: secondport
|
||||
|
||||
# - name: cretae tetmplate file with ip
|
||||
# template:
|
||||
# src: /etc/ansible/files/networks/testfile.j2
|
||||
# dest: /etc/file.conf
|
||||
# owner: root
|
||||
# group: root
|
||||
# mode: 0644
|
||||
|
||||
- name: collect old ifcfg-files
|
||||
shell: ls /etc/sysconfig/network-scripts/ | grep ifcfg | grep -v 'ifcfg-lo\|ifcfg-ens1f0\|ens1f1' | awk '{print $1}'
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: oldint
|
||||
|
||||
- name: delete old interface files
|
||||
file:
|
||||
state: absent
|
||||
path: /etc/sysconfig/network-scripts/{{ item }}
|
||||
loop: "{{oldint.stdout_lines}}"
|
||||
when: oldint.stdout != ""
|
||||
|
||||
- name: cretae ifcfg-{{ firstport.stdout }} network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-physicalif01
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-{{ firstport.stdout }}
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: cretae ifcfg-{{ secondport.stdout }} network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-physicalif02
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-{{ secondport.stdout }}
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: cretae bond0 network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-bond0
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-bond0
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: cretae main bridge network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-br-ext-main
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-br-ext-main
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: cretae mgmt0 network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-mgmt0
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-mgmt0
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: cretae main bridge network config file
|
||||
template:
|
||||
src: /etc/ansible/files/networks/ifcfg-port-int
|
||||
dest: /etc/sysconfig/network-scripts/ifcfg-port-int
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: check ovs bond exist
|
||||
shell: ovs-vsctl show | grep bond0 | awk '{print $2}'
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: bondexist
|
||||
|
||||
- name: check mgmt0 port exist
|
||||
shell: ovs-vsctl show | grep Port | grep mgmt0 | awk '{print $2}'
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: mgmtexist
|
||||
|
||||
- name: check mgmt-bidge exist
|
||||
shell: ovs-vsctl show | grep br-mgmt | awk '{print $2}'
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: brmgmtexist
|
||||
|
||||
- name: create bond if no exist
|
||||
shell: ovs-vsctl add-bond ovs-main bond0 {{ firstport.stdout }} {{ secondport.stdout }}
|
||||
args:
|
||||
executable: /bin/bash
|
||||
when: bondexist.stdout == ""
|
||||
|
||||
- name: set bond lacp to active
|
||||
shell: ovs-vsctl set port bond0 lacp=active
|
||||
args:
|
||||
executable: /bin/bash
|
||||
when: bondexist.stdout == ""
|
||||
|
||||
- name: create management bridge
|
||||
shell: ovs-vsctl add-br br-mgmt ovs-main 162
|
||||
args:
|
||||
executable: /bin/bash
|
||||
when: brmgmtexist.stdout == ""
|
||||
|
||||
- name: add management port mgmt0
|
||||
shell: ovs-vsctl add-port br-mgmt mgmt0 -- set interface mgmt0 type=internal
|
||||
args:
|
||||
executable: /bin/bash
|
||||
when: mgmtexist.stdout == ""
|
||||
|
||||
- name: restart network services
|
||||
systemd:
|
||||
state: restarted
|
||||
enabled: yes
|
||||
daemon_reload: yes
|
||||
name: network.service
|
||||
|
||||
|
||||
@@ -0,0 +1,122 @@
|
||||
---
|
||||
- hosts: bonchvisors
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
|
||||
tasks:
|
||||
|
||||
- name: install openstack nova compute elements
|
||||
yum:
|
||||
name: "{{ packages }}"
|
||||
state: latest
|
||||
vars:
|
||||
packages:
|
||||
- ebtables
|
||||
- ipset
|
||||
- openstack-nova-compute
|
||||
- openstack-neutron-ml2
|
||||
- openstack-neutron-openvswitch
|
||||
|
||||
|
||||
# - name: restart openvswitch services
|
||||
# systemd:
|
||||
# state: restarted
|
||||
# enabled: yes
|
||||
# daemon_reload: yes
|
||||
# name: openvswitch.service
|
||||
|
||||
- name: get public ip address
|
||||
shell: echo 172.17.2.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: public_ip
|
||||
|
||||
- name: get private ip address
|
||||
shell: echo 172.17.3.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: private_ip
|
||||
|
||||
- name: get tunnel ip address
|
||||
shell: echo 172.17.1.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: tunnel_ip
|
||||
|
||||
|
||||
# - name: creat first externalbridge patchpanel network config file
|
||||
# template:
|
||||
# src: /etc/ansible/files/networks/ifcfg-patch-main-ext01
|
||||
# dest: /etc/sysconfig/network-scripts/ifcfg-patch-main-ext01
|
||||
# owner: root
|
||||
# group: root
|
||||
# mode: 0644
|
||||
|
||||
|
||||
# - name: creat second external bridge patchpanel network config file
|
||||
# template:
|
||||
# src: /etc/ansible/files/networks/ifcfg-patch-main-ext02
|
||||
# dest: /etc/sysconfig/network-scripts/ifcfg-patch-main-ext02
|
||||
# owner: root
|
||||
# group: root
|
||||
# mode: 0644
|
||||
|
||||
- name: create openvswitch_agent.ini config file
|
||||
template:
|
||||
src: /etc/ansible/files/openvswitch_agent.ini
|
||||
dest: /etc/neutron/plugins/ml2/openvswitch_agent.ini
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
|
||||
- name: create ml2_conf.ini config file
|
||||
template:
|
||||
src: /etc/ansible/files/ml2_conf.ini
|
||||
dest: /etc/neutron/plugins/ml2/ml2_conf.ini
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
- name: create nova.conf config file
|
||||
template:
|
||||
src: /etc/ansible/files/nova.conf
|
||||
dest: /etc/nova/nova.conf
|
||||
owner: root
|
||||
group: root
|
||||
mode: 0644
|
||||
|
||||
#slave bridge creation
|
||||
|
||||
|
||||
|
||||
|
||||
# - name: detect all bridges, except ovs-main
|
||||
# shell: ovs-vsctl list-br | grep -v "ovs-main" | awk "{print $1}"
|
||||
# args:
|
||||
# executable: /bin/bash
|
||||
# register: oldbridges
|
||||
|
||||
# - name: clear all bridges, except ovs-main
|
||||
# shell: ovs-vsctl --if-exist del-br {{ item }}
|
||||
# args:
|
||||
# executable: /bin/bash
|
||||
# loop: "{{oldbridges.stdout_lines}}"
|
||||
# when: oldbridges.stdout != ""
|
||||
|
||||
- name: restart neutron-openvswitch
|
||||
systemd:
|
||||
state: restarted
|
||||
enabled: yes
|
||||
daemon_reload: yes
|
||||
name: neutron-openvswitch-agent.service
|
||||
|
||||
- name: restart openstack-nova
|
||||
systemd:
|
||||
state: restarted
|
||||
enabled: yes
|
||||
daemon_reload: yes
|
||||
name: openstack-nova-compute.service
|
||||
|
||||
@@ -0,0 +1,20 @@
|
||||
---
|
||||
- hosts: bonchvisor04
|
||||
remote_user: cephadmin
|
||||
become: true
|
||||
become_user: root
|
||||
become_method: sudo
|
||||
|
||||
tasks:
|
||||
|
||||
|
||||
|
||||
- name: detect dpdk interface name
|
||||
shell: /usr/sbin/driverctl -v list-devices | grep -i net | grep 82576 | awk '{print $1}'
|
||||
args:
|
||||
executable: /bin/bash
|
||||
register: dpdk_bus
|
||||
|
||||
- name: check dpdk_bus
|
||||
debug:
|
||||
msg: "{{ dpdk_bus.stdout_lines[1] }}"
|
||||
@@ -0,0 +1,16 @@
|
||||
#/bin/bash
|
||||
|
||||
devname=$1
|
||||
|
||||
size=$2
|
||||
|
||||
partsize=$(( $size * 1024 * 1024 * 2 ))
|
||||
|
||||
start=$(( $(parted $devname 'unit % print' | grep -v extended | tail -2 | grep . | awk '{print $3}' | tr -d %| cut -f1 -d".") + 1 ))
|
||||
|
||||
|
||||
for i in {1..4}; do
|
||||
|
||||
parted $devname mkpart ext2 "$(( $start + $(( $(( $i - 1 )) * 10 )) ))"% "$(( $start + $(( $i*10 )) ))"%
|
||||
|
||||
done
|
||||
@@ -0,0 +1,38 @@
|
||||
#!/bin/bash
|
||||
|
||||
devname=$1
|
||||
extended_exist=$(parted $devname print | grep extended)
|
||||
logical_exist=$(parted $devname print | grep -v Sector | grep logical)
|
||||
|
||||
size=$2
|
||||
|
||||
echo "extended value is :$extended_exist-"
|
||||
echo "logical value is:$logical_exist-"
|
||||
|
||||
if [ -z "$extended_exist" ]
|
||||
then
|
||||
echo "extended no exist, creating.."
|
||||
|
||||
free=$(parted $devname 'unit s print' | grep -v extended | tail -2 | grep . | awk '{print $3}' | tr -d s)
|
||||
free=$(( $free+1 ))
|
||||
|
||||
parted $devname mkpart extended "$free"s 100%
|
||||
|
||||
echo "logical no exist, creating.."
|
||||
|
||||
for i in {1..4}; do
|
||||
free=$(parted $devname 'unit % print' | grep -v extended | tail -2 | grep . | awk '{print $3}' | tr -d %| cut -f1 -d".")
|
||||
free=$(( $free+1 ))
|
||||
end=$(awk -v a="$free" -v b="$size" 'BEGIN {print a + b}')
|
||||
parted $devname mkpart logical ext2 $(echo $free)% $(echo $end)%
|
||||
done
|
||||
elif [ -z "$logical_exist" ]
|
||||
then
|
||||
echo "extended exist, but logical no exist, creating.."
|
||||
for i in {1..4}; do
|
||||
free=$(parted $devname 'unit % print' | grep -v extended | tail -2 | grep . | awk '{print $3}' | tr -d %| cut -f1 -d".")
|
||||
free=$(( $free+1 ))
|
||||
end=$(awk -v a="$free" -v b="$size" 'BEGIN {print a + b}')
|
||||
parted $devname mkpart logical ext2 $(echo $free)% $(echo $end)%
|
||||
done
|
||||
fi
|
||||
@@ -0,0 +1,8 @@
|
||||
#/bin/bash
|
||||
|
||||
devname=$1
|
||||
|
||||
|
||||
start=$(( $(parted $devname 'unit % print' | grep -v extended | tail -2 | grep . | awk '{print $3}' | tr -d %| cut -f1 -d".") + 1 ))
|
||||
|
||||
parted $devname mkpart ext2 "$start"% 100%
|
||||
|
After Width: | Height: | Size: 60 KiB |
|
After Width: | Height: | Size: 119 KiB |
|
After Width: | Height: | Size: 89 KiB |
|
After Width: | Height: | Size: 118 KiB |
|
After Width: | Height: | Size: 118 KiB |
|
After Width: | Height: | Size: 131 KiB |
|
After Width: | Height: | Size: 157 KiB |
|
After Width: | Height: | Size: 31 KiB |
|
After Width: | Height: | Size: 63 KiB |
|
After Width: | Height: | Size: 27 KiB |
|
After Width: | Height: | Size: 38 KiB |
@@ -0,0 +1 @@
|
||||
|
||||
@@ -0,0 +1,30 @@
|
||||
#!/bin/bash
|
||||
|
||||
case $1 in
|
||||
-n)
|
||||
k=$2
|
||||
;;
|
||||
start)
|
||||
for i in $(seq 1 `nproc`); do sha1sum /dev/zero &2>1; done
|
||||
exit 0
|
||||
;;
|
||||
stop)
|
||||
pkill -f sha1sum
|
||||
exit 0
|
||||
;;
|
||||
*)
|
||||
echo wrong paremeters, exit...
|
||||
exit 1
|
||||
esac
|
||||
|
||||
case $3 in
|
||||
start)
|
||||
for i in $(seq 1 $k); do sha1sum /dev/zero &2>1; done
|
||||
;;
|
||||
stop)
|
||||
pkill -f sha1sum
|
||||
;;
|
||||
*)
|
||||
echo wrong paremeters, exit...
|
||||
exit 1
|
||||
esac
|
||||
@@ -0,0 +1,27 @@
|
||||
#!/usr/bin/python3.6
|
||||
import os
|
||||
import sys
|
||||
import re
|
||||
|
||||
new_args = ['/usr/libexec/qemu-kvm.origin']
|
||||
flag = 0
|
||||
|
||||
for i in range(1,len(sys.argv)+1):
|
||||
if sys.argv[i-1] == "-cpu":
|
||||
subargs = sys.argv[i].split(",")
|
||||
if not ("kvm=off" in subargs): subargs.insert(1,"kvm=off")
|
||||
|
||||
for key in subargs:
|
||||
if (re.findall('hv_vendor_id=.*', key).__len__()): flag = 1
|
||||
|
||||
if not flag: subargs.insert(2,"hv_vendor_id=Some_Coffee")
|
||||
|
||||
new_arg = ",".join(subargs)
|
||||
new_args.append(new_arg)
|
||||
continue
|
||||
try:
|
||||
new_args.append(sys.argv[i])
|
||||
except IndexError:
|
||||
pass
|
||||
|
||||
os.execv('/usr/libexec/qemu-kvm.origin', new_args)
|
||||