Copy from GitHub repo

This commit is contained in:
Dmitry Vlasov
2020-08-12 00:02:27 +03:00
parent c447c45bbb
commit 42ae66e3ec
90 changed files with 5632 additions and 0 deletions
+26
View File
@@ -1,2 +1,28 @@
# Openstack Deployment # Openstack Deployment
## Scripts and Guides for enviroment setup
### 1. create-journal-on-ssd.sh ###
This script used for creating joudnal partitions (4 partitions hardcoded) on drive, that alredy have other partition.
partition that created are logical, firstly created extended partition for all logical.
SYNTAX:
```create-journal-on-ssd.sh {device} {size in %}```
example:
``` #./create-journal-on-ssd.sh /dev/sde 10```
### 2. create-journal-on-ssd-gpt.sh ###
This script used for creating joudnal partitions (4 partitions hardcoded) on GPT drive, that alredy have other partition.
SYNTAX:
```create-journal-on-ssd-gpt.sh {device} {size in %}```
example:
``` #./create-journal-on-ssd-gpt.sh /dev/sde 10```
+496
View File
@@ -0,0 +1,496 @@
# config file for ansible -- https://ansible.com/
# ===============================================
# nearly all parameters can be overridden in ansible-playbook
# or with command line flags. ansible will read ANSIBLE_CONFIG,
# ansible.cfg in the current working directory, .ansible.cfg in
# the home directory or /etc/ansible/ansible.cfg, whichever it
# finds first
[defaults]
# some basic default values...
#inventory = /etc/ansible/hosts
#library = /usr/share/my_modules/
#module_utils = /usr/share/my_module_utils/
#remote_tmp = ~/.ansible/tmp
#local_tmp = ~/.ansible/tmp
#plugin_filters_cfg = /etc/ansible/plugin_filters.yml
#forks = 5
#poll_interval = 15
#sudo_user = root
#ask_sudo_pass = True
#ask_pass = True
#transport = smart
#remote_port = 22
#module_lang = C
#module_set_locale = False
# plays will gather facts by default, which contain information about
# the remote system.
#
# smart - gather by default, but don't regather if already gathered
# implicit - gather by default, turn off with gather_facts: False
# explicit - do not gather by default, must say gather_facts: True
#gathering = implicit
# This only affects the gathering done by a play's gather_facts directive,
# by default gathering retrieves all facts subsets
# all - gather all subsets
# network - gather min and network facts
# hardware - gather hardware facts (longest facts to retrieve)
# virtual - gather min and virtual facts
# facter - import facts from facter
# ohai - import facts from ohai
# You can combine them using comma (ex: network,virtual)
# You can negate them using ! (ex: !hardware,!facter,!ohai)
# A minimal set of facts is always gathered.
#gather_subset = all
# some hardware related facts are collected
# with a maximum timeout of 10 seconds. This
# option lets you increase or decrease that
# timeout to something more suitable for the
# environment.
# gather_timeout = 10
# Ansible facts are available inside the ansible_facts.* dictionary
# namespace. This setting maintains the behaviour which was the default prior
# to 2.5, duplicating these variables into the main namespace, each with a
# prefix of 'ansible_'.
# This variable is set to True by default for backwards compatibility. It
# will be changed to a default of 'False' in a future release.
# ansible_facts.
# inject_facts_as_vars = True
# additional paths to search for roles in, colon separated
#roles_path = /etc/ansible/roles
# uncomment this to disable SSH key host checking
#host_key_checking = False
# change the default callback, you can only have one 'stdout' type enabled at a time.
#stdout_callback = skippy
## Ansible ships with some plugins that require whitelisting,
## this is done to avoid running all of a type by default.
## These setting lists those that you want enabled for your system.
## Custom plugins should not need this unless plugin author specifies it.
# enable callback plugins, they can output to stdout but cannot be 'stdout' type.
#callback_whitelist = timer, mail
# Determine whether includes in tasks and handlers are "static" by
# default. As of 2.0, includes are dynamic by default. Setting these
# values to True will make includes behave more like they did in the
# 1.x versions.
#task_includes_static = False
#handler_includes_static = False
# Controls if a missing handler for a notification event is an error or a warning
#error_on_missing_handler = True
# change this for alternative sudo implementations
#sudo_exe = sudo
# What flags to pass to sudo
# WARNING: leaving out the defaults might create unexpected behaviours
#sudo_flags = -H -S -n
# SSH timeout
#timeout = 10
# default user to use for playbooks if user is not specified
# (/usr/bin/ansible will use current user as default)
#remote_user = root
# logging is off by default unless this path is defined
# if so defined, consider logrotate
#log_path = /var/log/ansible.log
# default module name for /usr/bin/ansible
#module_name = command
# use this shell for commands executed under sudo
# you may need to change this to bin/bash in rare instances
# if sudo is constrained
#executable = /bin/sh
# if inventory variables overlap, does the higher precedence one win
# or are hash values merged together? The default is 'replace' but
# this can also be set to 'merge'.
#hash_behaviour = replace
# by default, variables from roles will be visible in the global variable
# scope. To prevent this, the following option can be enabled, and only
# tasks and handlers within the role will see the variables there
#private_role_vars = yes
# list any Jinja2 extensions to enable here:
#jinja2_extensions = jinja2.ext.do,jinja2.ext.i18n
# if set, always use this private key file for authentication, same as
# if passing --private-key to ansible or ansible-playbook
#private_key_file = /path/to/file
# If set, configures the path to the Vault password file as an alternative to
# specifying --vault-password-file on the command line.
#vault_password_file = /path/to/vault_password_file
# format of string {{ ansible_managed }} available within Jinja2
# templates indicates to users editing templates files will be replaced.
# replacing {file}, {host} and {uid} and strftime codes with proper values.
#ansible_managed = Ansible managed: {file} modified on %Y-%m-%d %H:%M:%S by {uid} on {host}
# {file}, {host}, {uid}, and the timestamp can all interfere with idempotence
# in some situations so the default is a static string:
#ansible_managed = Ansible managed
# by default, ansible-playbook will display "Skipping [host]" if it determines a task
# should not be run on a host. Set this to "False" if you don't want to see these "Skipping"
# messages. NOTE: the task header will still be shown regardless of whether or not the
# task is skipped.
#display_skipped_hosts = True
# by default, if a task in a playbook does not include a name: field then
# ansible-playbook will construct a header that includes the task's action but
# not the task's args. This is a security feature because ansible cannot know
# if the *module* considers an argument to be no_log at the time that the
# header is printed. If your environment doesn't have a problem securing
# stdout from ansible-playbook (or you have manually specified no_log in your
# playbook on all of the tasks where you have secret information) then you can
# safely set this to True to get more informative messages.
#display_args_to_stdout = False
# by default (as of 1.3), Ansible will raise errors when attempting to dereference
# Jinja2 variables that are not set in templates or action lines. Uncomment this line
# to revert the behavior to pre-1.3.
#error_on_undefined_vars = False
# by default (as of 1.6), Ansible may display warnings based on the configuration of the
# system running ansible itself. This may include warnings about 3rd party packages or
# other conditions that should be resolved if possible.
# to disable these warnings, set the following value to False:
#system_warnings = True
# by default (as of 1.4), Ansible may display deprecation warnings for language
# features that should no longer be used and will be removed in future versions.
# to disable these warnings, set the following value to False:
#deprecation_warnings = True
# (as of 1.8), Ansible can optionally warn when usage of the shell and
# command module appear to be simplified by using a default Ansible module
# instead. These warnings can be silenced by adjusting the following
# setting or adding warn=yes or warn=no to the end of the command line
# parameter string. This will for example suggest using the git module
# instead of shelling out to the git command.
# command_warnings = False
# set plugin path directories here, separate with colons
#action_plugins = /usr/share/ansible/plugins/action
#cache_plugins = /usr/share/ansible/plugins/cache
#callback_plugins = /usr/share/ansible/plugins/callback
#connection_plugins = /usr/share/ansible/plugins/connection
#lookup_plugins = /usr/share/ansible/plugins/lookup
#inventory_plugins = /usr/share/ansible/plugins/inventory
#vars_plugins = /usr/share/ansible/plugins/vars
#filter_plugins = /usr/share/ansible/plugins/filter
#test_plugins = /usr/share/ansible/plugins/test
#terminal_plugins = /usr/share/ansible/plugins/terminal
#strategy_plugins = /usr/share/ansible/plugins/strategy
# by default, ansible will use the 'linear' strategy but you may want to try
# another one
#strategy = free
# by default callbacks are not loaded for /bin/ansible, enable this if you
# want, for example, a notification or logging callback to also apply to
# /bin/ansible runs
#bin_ansible_callbacks = False
# don't like cows? that's unfortunate.
# set to 1 if you don't want cowsay support or export ANSIBLE_NOCOWS=1
#nocows = 1
# set which cowsay stencil you'd like to use by default. When set to 'random',
# a random stencil will be selected for each task. The selection will be filtered
# against the `cow_whitelist` option below.
#cow_selection = default
#cow_selection = random
# when using the 'random' option for cowsay, stencils will be restricted to this list.
# it should be formatted as a comma-separated list with no spaces between names.
# NOTE: line continuations here are for formatting purposes only, as the INI parser
# in python does not support them.
#cow_whitelist=bud-frogs,bunny,cheese,daemon,default,dragon,elephant-in-snake,elephant,eyes,\
# hellokitty,kitty,luke-koala,meow,milk,moofasa,moose,ren,sheep,small,stegosaurus,\
# stimpy,supermilker,three-eyes,turkey,turtle,tux,udder,vader-koala,vader,www
# don't like colors either?
# set to 1 if you don't want colors, or export ANSIBLE_NOCOLOR=1
#nocolor = 1
# if set to a persistent type (not 'memory', for example 'redis') fact values
# from previous runs in Ansible will be stored. This may be useful when
# wanting to use, for example, IP information from one group of servers
# without having to talk to them in the same playbook run to get their
# current IP information.
#fact_caching = memory
#This option tells Ansible where to cache facts. The value is plugin dependent.
#For the jsonfile plugin, it should be a path to a local directory.
#For the redis plugin, the value is a host:port:database triplet: fact_caching_connection = localhost:6379:0
#fact_caching_connection=/tmp
# retry files
# When a playbook fails by default a .retry file will be created in ~/
# You can disable this feature by setting retry_files_enabled to False
# and you can change the location of the files by setting retry_files_save_path
#retry_files_enabled = False
#retry_files_save_path = ~/.ansible-retry
# squash actions
# Ansible can optimise actions that call modules with list parameters
# when looping. Instead of calling the module once per with_ item, the
# module is called once with all items at once. Currently this only works
# under limited circumstances, and only with parameters named 'name'.
#squash_actions = apk,apt,dnf,homebrew,pacman,pkgng,yum,zypper
# prevents logging of task data, off by default
#no_log = False
# prevents logging of tasks, but only on the targets, data is still logged on the master/controller
#no_target_syslog = False
# controls whether Ansible will raise an error or warning if a task has no
# choice but to create world readable temporary files to execute a module on
# the remote machine. This option is False by default for security. Users may
# turn this on to have behaviour more like Ansible prior to 2.1.x. See
# https://docs.ansible.com/ansible/become.html#becoming-an-unprivileged-user
# for more secure ways to fix this than enabling this option.
#allow_world_readable_tmpfiles = False
# controls the compression level of variables sent to
# worker processes. At the default of 0, no compression
# is used. This value must be an integer from 0 to 9.
#var_compression_level = 9
# controls what compression method is used for new-style ansible modules when
# they are sent to the remote system. The compression types depend on having
# support compiled into both the controller's python and the client's python.
# The names should match with the python Zipfile compression types:
# * ZIP_STORED (no compression. available everywhere)
# * ZIP_DEFLATED (uses zlib, the default)
# These values may be set per host via the ansible_module_compression inventory
# variable
#module_compression = 'ZIP_DEFLATED'
# This controls the cutoff point (in bytes) on --diff for files
# set to 0 for unlimited (RAM may suffer!).
#max_diff_size = 1048576
# This controls how ansible handles multiple --tags and --skip-tags arguments
# on the CLI. If this is True then multiple arguments are merged together. If
# it is False, then the last specified argument is used and the others are ignored.
# This option will be removed in 2.8.
#merge_multiple_cli_flags = True
# Controls showing custom stats at the end, off by default
#show_custom_stats = True
# Controls which files to ignore when using a directory as inventory with
# possibly multiple sources (both static and dynamic)
#inventory_ignore_extensions = ~, .orig, .bak, .ini, .cfg, .retry, .pyc, .pyo
# This family of modules use an alternative execution path optimized for network appliances
# only update this setting if you know how this works, otherwise it can break module execution
#network_group_modules=eos, nxos, ios, iosxr, junos, vyos
# When enabled, this option allows lookups (via variables like {{lookup('foo')}} or when used as
# a loop with `with_foo`) to return data that is not marked "unsafe". This means the data may contain
# jinja2 templating language which will be run through the templating engine.
# ENABLING THIS COULD BE A SECURITY RISK
#allow_unsafe_lookups = False
# set default errors for all plays
#any_errors_fatal = False
[inventory]
# enable inventory plugins, default: 'host_list', 'script', 'yaml', 'ini'
#enable_plugins = host_list, virtualbox, yaml, constructed
# ignore these extensions when parsing a directory as inventory source
#ignore_extensions = .pyc, .pyo, .swp, .bak, ~, .rpm, .md, .txt, ~, .orig, .ini, .cfg, .retry
# ignore files matching these patterns when parsing a directory as inventory source
#ignore_patterns=
# If 'true' unparsed inventory sources become fatal errors, they are warnings otherwise.
#unparsed_is_failed=False
[privilege_escalation]
#become=True
#become_method=sudo
#become_user=root
#become_ask_pass=False
[paramiko_connection]
# uncomment this line to cause the paramiko connection plugin to not record new host
# keys encountered. Increases performance on new host additions. Setting works independently of the
# host key checking setting above.
#record_host_keys=False
# by default, Ansible requests a pseudo-terminal for commands executed under sudo. Uncomment this
# line to disable this behaviour.
#pty=False
# paramiko will default to looking for SSH keys initially when trying to
# authenticate to remote devices. This is a problem for some network devices
# that close the connection after a key failure. Uncomment this line to
# disable the Paramiko look for keys function
#look_for_keys = False
# When using persistent connections with Paramiko, the connection runs in a
# background process. If the host doesn't already have a valid SSH key, by
# default Ansible will prompt to add the host key. This will cause connections
# running in background processes to fail. Uncomment this line to have
# Paramiko automatically add host keys.
#host_key_auto_add = True
[ssh_connection]
# ssh arguments to use
# Leaving off ControlPersist will result in poor performance, so use
# paramiko on older platforms rather than removing it, -C controls compression use
#ssh_args = -C -o ControlMaster=auto -o ControlPersist=60s
# The base directory for the ControlPath sockets.
# This is the "%(directory)s" in the control_path option
#
# Example:
# control_path_dir = /tmp/.ansible/cp
#control_path_dir = ~/.ansible/cp
# The path to use for the ControlPath sockets. This defaults to a hashed string of the hostname,
# port and username (empty string in the config). The hash mitigates a common problem users
# found with long hostames and the conventional %(directory)s/ansible-ssh-%%h-%%p-%%r format.
# In those cases, a "too long for Unix domain socket" ssh error would occur.
#
# Example:
# control_path = %(directory)s/%%h-%%r
#control_path =
# Enabling pipelining reduces the number of SSH operations required to
# execute a module on the remote server. This can result in a significant
# performance improvement when enabled, however when using "sudo:" you must
# first disable 'requiretty' in /etc/sudoers
#
# By default, this option is disabled to preserve compatibility with
# sudoers configurations that have requiretty (the default on many distros).
#
#pipelining = False
# Control the mechanism for transferring files (old)
# * smart = try sftp and then try scp [default]
# * True = use scp only
# * False = use sftp only
#scp_if_ssh = smart
# Control the mechanism for transferring files (new)
# If set, this will override the scp_if_ssh option
# * sftp = use sftp to transfer files
# * scp = use scp to transfer files
# * piped = use 'dd' over SSH to transfer files
# * smart = try sftp, scp, and piped, in that order [default]
#transfer_method = smart
# if False, sftp will not use batch mode to transfer files. This may cause some
# types of file transfer failures impossible to catch however, and should
# only be disabled if your sftp version has problems with batch mode
#sftp_batch_mode = False
# The -tt argument is passed to ssh when pipelining is not enabled because sudo
# requires a tty by default.
#use_tty = True
# Number of times to retry an SSH connection to a host, in case of UNREACHABLE.
# For each retry attempt, there is an exponential backoff,
# so after the first attempt there is 1s wait, then 2s, 4s etc. up to 30s (max).
#retries = 3
[persistent_connection]
# Configures the persistent connection timeout value in seconds. This value is
# how long the persistent connection will remain idle before it is destroyed.
# If the connection doesn't receive a request before the timeout value
# expires, the connection is shutdown. The default value is 30 seconds.
#connect_timeout = 30
# Configures the persistent connection retry timeout. This value configures the
# the retry timeout that ansible-connection will wait to connect
# to the local domain socket. This value must be larger than the
# ssh timeout (timeout) and less than persistent connection idle timeout (connect_timeout).
# The default value is 15 seconds.
#connect_retry_timeout = 15
# The command timeout value defines the amount of time to wait for a command
# or RPC call before timing out. The value for the command timeout must
# be less than the value of the persistent connection idle timeout (connect_timeout)
# The default value is 10 second.
#command_timeout = 10
[accelerate]
#accelerate_port = 5099
#accelerate_timeout = 30
#accelerate_connect_timeout = 5.0
# The daemon timeout is measured in minutes. This time is measured
# from the last activity to the accelerate daemon.
#accelerate_daemon_timeout = 30
# If set to yes, accelerate_multi_key will allow multiple
# private keys to be uploaded to it, though each user must
# have access to the system via SSH to add a new key. The default
# is "no".
#accelerate_multi_key = yes
[selinux]
# file systems that require special treatment when dealing with security context
# the default behaviour that copies the existing context or uses the user default
# needs to be changed to use the file system dependent context.
#special_context_filesystems=nfs,vboxsf,fuse,ramfs,9p
# Set this to yes to allow libvirt_lxc connections to work without SELinux.
#libvirt_lxc_noseclabel = yes
[colors]
#highlight = white
#verbose = blue
#warn = bright purple
#error = red
#debug = dark gray
#deprecate = purple
#skip = cyan
#unreachable = red
#ok = green
#changed = yellow
#diff_add = green
#diff_remove = red
#diff_lines = cyan
[diff]
# Always print diff when running ( same as always running with -D/--diff )
# always = no
# Set how many context lines to show in diff
# context = 3
+34
View File
@@ -0,0 +1,34 @@
[DEFAULT]
transport_url = rabbit://openstack:GAQ5q55LTj9D@controller-virt
[compute]
[coordination]
[dispatcher_gnocchi]
[event]
[hardware]
[ipmi]
[matchmaker_redis]
[meter]
[notification]
[oslo_concurrency]
[oslo_messaging_amqp]
[oslo_messaging_kafka]
[oslo_messaging_notifications]
[oslo_messaging_rabbit]
[oslo_messaging_zmq]
[polling]
[publisher]
[publisher_notifier]
[rgw_admin_credentials]
[service_credentials]
auth_url = http://controller-virt:5000
project_domain_id = default
user_domain_id = default
auth_type = password
username = ceilometer
project_name = service
password = PhCiXGXFlL
interface = internalURL
region_name = RegionOne
[service_types]
[vmware]
[xenapi]
+2
View File
@@ -0,0 +1,2 @@
[client.vms]
key = AQBFsIFbK1PlGhAAA7dg70FdghDmIZGF32157Q==
+6
View File
@@ -0,0 +1,6 @@
server 172.16.4.11 iburst
server 172.16.4.95 iburst
driftfile /var/lib/chrony/drift
makestep 1.0 3
rtcsync
logdir /var/log/chrony
+1
View File
@@ -0,0 +1 @@
AQCBF4BbaRoNIxAAZXoWxwAnQdgdScJrpR054w==
+1
View File
@@ -0,0 +1 @@
AQBFsIFbK1PlGhAAA7dg70FdghDmIZGF32157Q==
+1
View File
@@ -0,0 +1 @@
uio_pci_generic
@@ -0,0 +1,14 @@
[Unit]
Description=HugeTLB Gigantic Pages Reservation
DefaultDependencies=no
Before=dev-hugepages.mount
ConditionPathExists=/sys/devices/system/node
[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/usr/lib/systemd/hugetlb-reserve-pages.sh
[Install]
WantedBy=sysinit.target
+25
View File
@@ -0,0 +1,25 @@
#!/bin/sh
nodes_path=/sys/devices/system/node/
if [ ! -d $nodes_path ]; then
echo "ERROR: $nodes_path does not exist"
exit 1
fi
reserve_pages()
{
echo $1 > $nodes_path/$2/hugepages/hugepages-2048kB/nr_hugepages
}
nodes=$(ls /sys/devices/system/node/ | grep node)
for i in $nodes; do
if [[ $i == node0 ]]
then
reserve_pages 512 $i
else
reserve_pages 0 $i
fi
done
+8
View File
@@ -0,0 +1,8 @@
TYPE=Bridge
NAME=br2
DEVICE=br2
ONBOOT=yes
BOOTPROTO=none
NOZEROCONF=yes
ZONE=public
MTU=9000
+7
View File
@@ -0,0 +1,7 @@
VLAN=yes
NAME=vlan165
DEVICE=vlan165
PHYSDEV=bond0
VLAN_NAME_TYPE=VLAN_PLUS_VID_PAD
BRIDGE=br2
VLAN_ID=165
+4
View File
@@ -0,0 +1,4 @@
options kvm-intel nested=1
options kvm-intel enable_shadow_vmcs=1
options kvm-intel enable_apicv=1
options kvm-intel ept=1
+33
View File
@@ -0,0 +1,33 @@
# Override the default config file
# NOTE: This setting is no longer honoured if using
# systemd. Set '--config /etc/libvirt/libvirtd.conf'
# in LIBVIRTD_ARGS instead.
#LIBVIRTD_CONFIG=/etc/libvirt/libvirtd.conf
# Listen for TCP/IP connections
# NB. must setup TLS/SSL keys prior to using this
LIBVIRTD_ARGS="--listen"
# Override Kerberos service keytab for SASL/GSSAPI
#KRB5_KTNAME=/etc/libvirt/krb5.tab
# Override the QEMU/SDL default audio driver probing when
# starting virtual machines using SDL graphics
#
# NB these have no effect for VMs using VNC, unless vnc_allow_host_audio
# is enabled in /etc/libvirt/qemu.conf
#QEMU_AUDIO_DRV=sdl
#
#SDL_AUDIODRIVER=pulse
# Override the maximum number of opened files.
# This only works with traditional init scripts.
# In the systemd world, the limit can only be changed by overriding
# LimitNOFILE for libvirtd.service. To do that, just create a *.conf
# file in /etc/systemd/system/libvirtd.service.d/ (for example
# /etc/systemd/system/libvirtd.service.d/openfiles.conf) and write
# the following two lines in it:
# [Service]
# LimitNOFILE=2048
#
#LIBVIRTD_NOFILES_LIMIT=2048
+468
View File
@@ -0,0 +1,468 @@
# Master libvirt daemon configuration file
#
# For further information consult https://libvirt.org/format.html
#
# NOTE: the tests/daemon-conf regression test script requires
# that each "PARAMETER = VALUE" line in this file have the parameter
# name just after a leading "#".
#################################################################
#
# Network connectivity controls
#
# Flag listening for secure TLS connections on the public TCP/IP port.
# NB, must pass the --listen flag to the libvirtd process for this to
# have any effect.
#
# It is necessary to setup a CA and issue server certificates before
# using this capability.
#
# This is enabled by default, uncomment this to disable it
listen_tls = 0
# Listen for unencrypted TCP connections on the public TCP/IP port.
# NB, must pass the --listen flag to the libvirtd process for this to
# have any effect.
#
# Using the TCP socket requires SASL authentication by default. Only
# SASL mechanisms which support data encryption are allowed. This is
# DIGEST_MD5 and GSSAPI (Kerberos5)
#
# This is disabled by default, uncomment this to enable it.
listen_tcp = 1
# Override the port for accepting secure TLS connections
# This can be a port number, or service name
#
#tls_port = "16514"
# Override the port for accepting insecure TCP connections
# This can be a port number, or service name
#
#tcp_port = "16509"
# Override the default configuration which binds to all network
# interfaces. This can be a numeric IPv4/6 address, or hostname
#
# If the libvirtd service is started in parallel with network
# startup (e.g. with systemd), binding to addresses other than
# the wildcards (0.0.0.0/::) might not be available yet.
#
#listen_addr = "192.168.0.1"
# Flag toggling mDNS advertizement of the libvirt service.
#
# Alternatively can disable for all services on a host by
# stopping the Avahi daemon
#
# This is disabled by default, uncomment this to enable it
#mdns_adv = 1
# Override the default mDNS advertizement name. This must be
# unique on the immediate broadcast network.
#
# The default is "Virtualization Host HOSTNAME", where HOSTNAME
# is substituted for the short hostname of the machine (without domain)
#
#mdns_name = "Virtualization Host Joe Demo"
#################################################################
#
# UNIX socket access controls
#
# Set the UNIX domain socket group ownership. This can be used to
# allow a 'trusted' set of users access to management capabilities
# without becoming root.
#
# This is restricted to 'root' by default.
#unix_sock_group = "libvirt"
# Set the UNIX socket permissions for the R/O socket. This is used
# for monitoring VM status only
#
# Default allows any user. If setting group ownership, you may want to
# restrict this too.
#unix_sock_ro_perms = "0777"
# Set the UNIX socket permissions for the R/W socket. This is used
# for full management of VMs
#
# Default allows only root. If PolicyKit is enabled on the socket,
# the default will change to allow everyone (eg, 0777)
#
# If not using PolicyKit and setting group ownership for access
# control, then you may want to relax this too.
#unix_sock_rw_perms = "0770"
# Set the UNIX socket permissions for the admin interface socket.
#
# Default allows only owner (root), do not change it unless you are
# sure to whom you are exposing the access to.
#unix_sock_admin_perms = "0700"
# Set the name of the directory in which sockets will be found/created.
#unix_sock_dir = "/var/run/libvirt"
#################################################################
#
# Authentication.
#
# - none: do not perform auth checks. If you can connect to the
# socket you are allowed. This is suitable if there are
# restrictions on connecting to the socket (eg, UNIX
# socket permissions), or if there is a lower layer in
# the network providing auth (eg, TLS/x509 certificates)
#
# - sasl: use SASL infrastructure. The actual auth scheme is then
# controlled from /etc/sasl2/libvirt.conf. For the TCP
# socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
# For non-TCP or TLS sockets, any scheme is allowed.
#
# - polkit: use PolicyKit to authenticate. This is only suitable
# for use on the UNIX sockets. The default policy will
# require a user to supply their own password to gain
# full read/write access (aka sudo like), while anyone
# is allowed read/only access.
#
# Set an authentication scheme for UNIX read-only sockets
# By default socket permissions allow anyone to connect
#
# To restrict monitoring of domains you may wish to enable
# an authentication mechanism here
#auth_unix_ro = "none"
# Set an authentication scheme for UNIX read-write sockets
# By default socket permissions only allow root. If PolicyKit
# support was compiled into libvirt, the default will be to
# use 'polkit' auth.
#
# If the unix_sock_rw_perms are changed you may wish to enable
# an authentication mechanism here
#auth_unix_rw = "none"
# Change the authentication scheme for TCP sockets.
#
# If you don't enable SASL, then all TCP traffic is cleartext.
# Don't do this outside of a dev/test scenario. For real world
# use, always enable SASL and use the GSSAPI or DIGEST-MD5
# mechanism in /etc/sasl2/libvirt.conf
auth_tcp = "none"
# Change the authentication scheme for TLS sockets.
#
# TLS sockets already have encryption provided by the TLS
# layer, and limited authentication is done by certificates
#
# It is possible to make use of any SASL authentication
# mechanism as well, by using 'sasl' for this option
#auth_tls = "none"
# Change the API access control scheme
#
# By default an authenticated user is allowed access
# to all APIs. Access drivers can place restrictions
# on this. By default the 'nop' driver is enabled,
# meaning no access control checks are done once a
# client has authenticated with libvirtd
#
#access_drivers = [ "polkit" ]
#################################################################
#
# TLS x509 certificate configuration
#
# Override the default server key file path
#
#key_file = "/etc/pki/libvirt/private/serverkey.pem"
# Override the default server certificate file path
#
#cert_file = "/etc/pki/libvirt/servercert.pem"
# Override the default CA certificate path
#
#ca_file = "/etc/pki/CA/cacert.pem"
# Specify a certificate revocation list.
#
# Defaults to not using a CRL, uncomment to enable it
#crl_file = "/etc/pki/CA/crl.pem"
#################################################################
#
# Authorization controls
#
# Flag to disable verification of our own server certificates
#
# When libvirtd starts it performs some sanity checks against
# its own certificates.
#
# Default is to always run sanity checks. Uncommenting this
# will disable sanity checks which is not a good idea
#tls_no_sanity_certificate = 1
# Flag to disable verification of client certificates
#
# Client certificate verification is the primary authentication mechanism.
# Any client which does not present a certificate signed by the CA
# will be rejected.
#
# Default is to always verify. Uncommenting this will disable
# verification - make sure an IP whitelist is set
#tls_no_verify_certificate = 1
# A whitelist of allowed x509 Distinguished Names
# This list may contain wildcards such as
#
# "C=GB,ST=London,L=London,O=Red Hat,CN=*"
#
# See the POSIX fnmatch function for the format of the wildcards.
#
# NB If this is an empty list, no client can connect, so comment out
# entirely rather than using empty list to disable these checks
#
# By default, no DN's are checked
#tls_allowed_dn_list = ["DN1", "DN2"]
# A whitelist of allowed SASL usernames. The format for username
# depends on the SASL authentication mechanism. Kerberos usernames
# look like username@REALM
#
# This list may contain wildcards such as
#
# "*@EXAMPLE.COM"
#
# See the POSIX fnmatch function for the format of the wildcards.
#
# NB If this is an empty list, no client can connect, so comment out
# entirely rather than using empty list to disable these checks
#
# By default, no Username's are checked
#sasl_allowed_username_list = ["joe@EXAMPLE.COM", "fred@EXAMPLE.COM" ]
# Override the compile time default TLS priority string. The
# default is usually "NORMAL" unless overridden at build time.
# Only set this is it is desired for libvirt to deviate from
# the global default settings.
#
#tls_priority="NORMAL"
#################################################################
#
# Processing controls
#
# The maximum number of concurrent client connections to allow
# over all sockets combined.
#max_clients = 5000
# The maximum length of queue of connections waiting to be
# accepted by the daemon. Note, that some protocols supporting
# retransmission may obey this so that a later reattempt at
# connection succeeds.
#max_queued_clients = 1000
# The maximum length of queue of accepted but not yet
# authenticated clients. The default value is 20. Set this to
# zero to turn this feature off.
#max_anonymous_clients = 20
# The minimum limit sets the number of workers to start up
# initially. If the number of active clients exceeds this,
# then more threads are spawned, up to max_workers limit.
# Typically you'd want max_workers to equal maximum number
# of clients allowed
#min_workers = 5
#max_workers = 20
# The number of priority workers. If all workers from above
# pool are stuck, some calls marked as high priority
# (notably domainDestroy) can be executed in this pool.
#prio_workers = 5
# Limit on concurrent requests from a single client
# connection. To avoid one client monopolizing the server
# this should be a small fraction of the global max_workers
# parameter.
#max_client_requests = 5
# Same processing controls, but this time for the admin interface.
# For description of each option, be so kind to scroll few lines
# upwards.
#admin_min_workers = 1
#admin_max_workers = 5
#admin_max_clients = 5
#admin_max_queued_clients = 5
#admin_max_client_requests = 5
#################################################################
#
# Logging controls
#
# Logging level: 4 errors, 3 warnings, 2 information, 1 debug
# basically 1 will log everything possible
# Note: Journald may employ rate limiting of the messages logged
# and thus lock up the libvirt daemon. To use the debug level with
# journald you have to specify it explicitly in 'log_outputs', otherwise
# only information level messages will be logged.
#log_level = 3
# Logging filters:
# A filter allows to select a different logging level for a given category
# of logs
# The format for a filter is one of:
# x:name
# x:+name
# where name is a string which is matched against the category
# given in the VIR_LOG_INIT() at the top of each libvirt source
# file, e.g., "remote", "qemu", or "util.json" (the name in the
# filter can be a substring of the full category name, in order
# to match multiple similar categories), the optional "+" prefix
# tells libvirt to log stack trace for each message matching
# name, and x is the minimal level where matching messages should
# be logged:
# 1: DEBUG
# 2: INFO
# 3: WARNING
# 4: ERROR
#
# Multiple filters can be defined in a single @filters, they just need to be
# separated by spaces.
#
# e.g. to only get warning or errors from the remote layer and only errors
# from the event layer:
#log_filters="3:remote 4:event"
# Logging outputs:
# An output is one of the places to save logging information
# The format for an output can be:
# x:stderr
# output goes to stderr
# x:syslog:name
# use syslog for the output and use the given name as the ident
# x:file:file_path
# output to a file, with the given filepath
# x:journald
# output to journald logging system
# In all case the x prefix is the minimal level, acting as a filter
# 1: DEBUG
# 2: INFO
# 3: WARNING
# 4: ERROR
#
# Multiple outputs can be defined, they just need to be separated by spaces.
# e.g. to log all warnings and errors to syslog under the libvirtd ident:
#log_outputs="3:syslog:libvirtd"
#
# Log debug buffer size:
#
# This configuration option is no longer used, since the global
# log buffer functionality has been removed. Please configure
# suitable log_outputs/log_filters settings to obtain logs.
#log_buffer_size = 64
##################################################################
#
# Auditing
#
# This setting allows usage of the auditing subsystem to be altered:
#
# audit_level == 0 -> disable all auditing
# audit_level == 1 -> enable auditing, only if enabled on host (default)
# audit_level == 2 -> enable auditing, and exit if disabled on host
#
#audit_level = 2
#
# If set to 1, then audit messages will also be sent
# via libvirt logging infrastructure. Defaults to 0
#
#audit_logging = 1
###################################################################
# UUID of the host:
# Host UUID is read from one of the sources specified in host_uuid_source.
#
# - 'smbios': fetch the UUID from 'dmidecode -s system-uuid'
# - 'machine-id': fetch the UUID from /etc/machine-id
#
# The host_uuid_source default is 'smbios'. If 'dmidecode' does not provide
# a valid UUID a temporary UUID will be generated.
#
# Another option is to specify host UUID in host_uuid.
#
# Keep the format of the example UUID below. UUID must not have all digits
# be the same.
# NB This default all-zeros UUID will not work. Replace
# it with the output of the 'uuidgen' command and then
# uncomment this entry
#host_uuid = "00000000-0000-0000-0000-000000000000"
#host_uuid_source = "smbios"
###################################################################
# Keepalive protocol:
# This allows libvirtd to detect broken client connections or even
# dead clients. A keepalive message is sent to a client after
# keepalive_interval seconds of inactivity to check if the client is
# still responding; keepalive_count is a maximum number of keepalive
# messages that are allowed to be sent to the client without getting
# any response before the connection is considered broken. In other
# words, the connection is automatically closed approximately after
# keepalive_interval * (keepalive_count + 1) seconds since the last
# message received from the client. If keepalive_interval is set to
# -1, libvirtd will never send keepalive requests; however clients
# can still send them and the daemon will send responses. When
# keepalive_count is set to 0, connections will be automatically
# closed after keepalive_interval seconds of inactivity without
# sending any keepalive messages.
#
#keepalive_interval = 5
#keepalive_count = 5
#
# These configuration options are no longer used. There is no way to
# restrict such clients from connecting since they first need to
# connect in order to ask for keepalive.
#
#keepalive_required = 1
#admin_keepalive_required = 1
# Keepalive settings for the admin interface
#admin_keepalive_interval = 5
#admin_keepalive_count = 5
###################################################################
# Open vSwitch:
# This allows to specify a timeout for openvswitch calls made by
# libvirt. The ovs-vsctl utility is used for the configuration and
# its timeout option is set by default to 5 seconds to avoid
# potential infinite waits blocking libvirt.
#
#ovs_timeout = 5
+9
View File
@@ -0,0 +1,9 @@
[DEFAULT]
[agent]
[linux_bridge]
physical_interface_mappings = provider-nat:vlan165
[securitygroup]
firewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver
enable_ipset = true
[vxlan]
l2_population = true
+21
View File
@@ -0,0 +1,21 @@
[DEFAULT]
[l2pop]
[ml2]
path_mtu = 9000
tenant_network_types = vxlan
type_drivers = flat,vlan,vxlan
extension_drivers = port_security
mechanism_drivers = openvswitch,l2population
physical_network_mtus = provider:9000
[ml2_type_flat]
[ml2_type_geneve]
[ml2_type_gre]
[ml2_type_vlan]
network_vlan_ranges = provider:160:165,212
[ml2_type_vxlan]
vni_ranges = 65537:69999
[securitygroup]
enable_security_group = True
firewall_driver = ovs_learn_action
[agent]
extensions = qos
+11
View File
@@ -0,0 +1,11 @@
TYPE=OVSBond
DEVICETYPE=ovs
NAME=bond0
DEVICE=bond0
ONBOOT=yes
BOOTPROTO=none
OVS_BRIDGE=br-ext-main
BOND_IFACES="{{ firstport.stdout }} {{ secondport.stdout }}"
OVS_OPTIONS="bond_mode=balance-tcp lacp=active"
NOZEROCONF=yes
HOTPUG=no
+7
View File
@@ -0,0 +1,7 @@
DEVICE=br-ext-main
DEVICETYPE=ovs
TYPE=OVSBridge
BOOTPROTO=none
OVS_EXTRA="set int $DEVICE mtu_request=9000"
ONBOOT=yes
HOTPLUG=no
+14
View File
@@ -0,0 +1,14 @@
TYPE=OVSIntPort
DEVICETYPE=ovs
DEVICE=mgmt0
ONBOOT=yes
OVS_BRIDGE=br-ext-main
OVS_OPTIONS="tag=161"
BOOTPROTO=static
IPADDR={{ public_ip.stdout }}
DNS1=172.17.1.10
GATEWAY=172.17.1.1
OVS_EXTRA="set int $DEVICE mtu_request=9000"
NOZEROCONF=yes
PREFIX=24
HOTPLUG="no"
@@ -0,0 +1,8 @@
DEVICE=patch-main-ext01
ONBOOT=yes
DEVICETYPE=ovs
TYPE=OVSPatchPort
OVS_OPTIONS="tag=160"
OVS_EXTRA="set int $DEVICE mtu_request=9000"
OVS_BRIDGE=br-main
OVS_PATCH_PEER=patch-ext01-main
@@ -0,0 +1,8 @@
DEVICE=patch-main-ext02
ONBOOT=yes
DEVICETYPE=ovs
TYPE=OVSPatchPort
OVS_OPTIONS="tag=165"
OVS_EXTRA="set int $DEVICE mtu_request=9000"
OVS_BRIDGE=br-main
OVS_PATCH_PEER=patch-ext02-main
@@ -0,0 +1,7 @@
DEVICE=patch-main-slave
ONBOOT=yes
DEVICETYPE=ovs
TYPE=OVSPatchPort
OVS_EXTRA="set int $DEVICE mtu_request=9000"
OVS_BRIDGE=br-ext-main
OVS_PATCH_PEER=patch-slave-main
@@ -0,0 +1,5 @@
TYPE=Ethernet
DEVICE={{ firstport.stdout }}
ONBOOT=yes
MTU=9000
ETHTOOL_OPTS="-K ${DEVICE} rx off tx off; -K ${DEVICE} tso off; -K ${DEVICE} gso off"
@@ -0,0 +1,5 @@
TYPE=Ethernet
DEVICE={{ secondport.stdout }}
ONBOOT=yes
MTU=9000
ETHTOOL_OPTS="-K ${DEVICE} rx off tx off; -K ${DEVICE} tso off; -K ${DEVICE} gso off"
+12
View File
@@ -0,0 +1,12 @@
TYPE=OVSIntPort
DEVICETYPE=ovs
DEVICE=port-int
ONBOOT=yes
OVS_BRIDGE=br-ext-main
OVS_OPTIONS="tag=162"
BOOTPROTO=static
OVS_EXTRA="set int $DEVICE mtu_request=9000"
IPADDR={{ private_ip.stdout }}
NOZEROCONF=yes
PREFIX=24
HOTPLUG="no"
+12
View File
@@ -0,0 +1,12 @@
TYPE=OVSIntPort
DEVICETYPE=ovs
DEVICE=port-tun
ONBOOT=yes
OVS_BRIDGE=br-dpdk
OVS_OPTIONS="tag=163"
BOOTPROTO=static
OVS_EXTRA="set int $DEVICE mtu_request=9000"
IPADDR={{ tun_ip.stdout }}
NOZEROCONF=yes
PREFIX=24
HOTPLUG="no"
+29
View File
@@ -0,0 +1,29 @@
[DEFAULT]
auth_strategy = keystone
transport_url = rabbit://openstack:GAQ5q55LTj9D@controller-virt
[agent]
[cors]
[database]
[keystone_authtoken]
auth_uri = http://controller-virt:5000
auth_url = http://controller-virt:35357
memcached_servers = controller-virt:11211
auth_type = password
project_domain_name = Default
user_domain_name = Default
project_name = service
username = neutron
password = 9hEFkAtYY
[matchmaker_redis]
[nova]
[oslo_concurrency]
lock_path = /var/lib/neutron/tmp
[oslo_messaging_amqp]
[oslo_messaging_kafka]
[oslo_messaging_notifications]
[oslo_messaging_rabbit]
[oslo_messaging_zmq]
[oslo_middleware]
[oslo_policy]
[quotas]
[ssl]
+111
View File
@@ -0,0 +1,111 @@
[DEFAULT]
my_ip={{ public_ip.stdout }}
use_neutron=true
firewall_driver = nova.virt.firewall.NoopFirewallDriver
enabled_apis=osapi_compute,metadata
transport_url = rabbit://openstack:GAQ5q55LTj9D@controller-virt
force_raw_images = True
security_group_api = neutron
instance_usage_audit = True
instance_usage_audit_period = hour
notify_on_state_change = vm_and_task_state
compute_monitors = cpu.virt_driver, numa_mem_bw.virt_driver
[api]
auth_strategy=keystone
[api_database]
[barbican]
[cache]
[cells]
[cinder]
os_region_name = RegionOne
[compute]
[conductor]
[console]
[consoleauth]
[cors]
[crypto]
[database]
[ephemeral_storage_encryption]
[filter_scheduler]
[glance]
api_servers = http://controller-ceph:9292
[guestfs]
[healthcheck]
[hyperv]
[ironic]
[key_manager]
[keystone]
[keystone_authtoken]
auth_url = http://controller-virt:5000
auth_url = http://controller-virt:35357
memcached_servers = controller-virt:11211
auth_type = password
project_domain_name = Default
user_domain_name = Default
project_name = service
username = nova
password = AFdhNTV4Pj
[libvirt]
virt_type=kvm
images_type = rbd
images_rbd_pool = vms
images_rbd_ceph_conf = /etc/ceph/ceph.conf
rbd_user = vms
rbd_secret_uuid = 565f7a01-3486-4a62-85bf-fbcc8490d7ca
disk_cachemodes = writeback
[matchmaker_redis]
[metrics]
[mks]
[neutron]
url = http://controller-net:9696
auth_url = http://controller-virt:35357
auth_type = password
project_domain_name = Default
user_domain_name = Default
region_name = RegionOne
project_name = service
username = neutron
password = 9hEFkAtYYa
[notifications]
notify_on_state_change = vm_and_task_state
[osapi_v21]
[oslo_concurrency]
lock_path=/var/lib/nova/tmp
[oslo_messaging_amqp]
[oslo_messaging_kafka]
[oslo_messaging_notifications]
driver = messagingv2
[oslo_messaging_rabbit]
[oslo_messaging_zmq]
[oslo_middleware]
[oslo_policy]
[pci]
[placement]
os_region_name = RegionOne
project_domain_name = Default
project_name = service
auth_type = password
user_domain_name = Default
auth_url = http://controller-virt:35357/v3
username = placement
password = jxjuhBKRQ9
[quota]
[rdp]
[remote_debug]
[scheduler]
[serial_console]
[service_user]
[spice]
[trusted_computing]
[upgrade_levels]
[vendordata_dynamic_auth]
[vmware]
[vnc]
enabled = True
vncserver_listen = 0.0.0.0
vncserver_proxyclient_address = $my_ip
novncproxy_base_url = http://controller-virt:6080/vnc_auto.html
[workarounds]
[wsgi]
[xenserver]
[xvp]
+11
View File
@@ -0,0 +1,11 @@
[DEFAULT]
[agent]
tunnel_types = vxlan
l2_population = true
arp_responder = True
[ovs]
local_ip = {{ tunnel_ip.stdout }}
bridge_mappings = provider:br-ext-main
[securitygroup]
firewall_driver = openvswitch
[xenapi]
Binary file not shown.
Binary file not shown.
+6
View File
@@ -0,0 +1,6 @@
<secret ephemeral='no' private='no'>
<uuid>da3a1f59-cb17-4259-9351-0b30cc54d778</uuid>
<usage type='ceph'>
<name>client.cinder secret</name>
</usage>
</secret>
+464
View File
@@ -0,0 +1,464 @@
###############################################################################
#
# snmpd.conf:
# An example configuration file for configuring the ucd-snmp snmpd agent.
#
###############################################################################
#
# This file is intended to only be as a starting point. Many more
# configuration directives exist than are mentioned in this file. For
# full details, see the snmpd.conf(5) manual page.
#
# All lines beginning with a '#' are comments and are intended for you
# to read. All other lines are configuration commands for the agent.
###############################################################################
# Access Control
###############################################################################
# As shipped, the snmpd demon will only respond to queries on the
# system mib group until this file is replaced or modified for
# security purposes. Examples are shown below about how to increase the
# level of access.
# By far, the most common question I get about the agent is "why won't
# it work?", when really it should be "how do I configure the agent to
# allow me to access it?"
#
# By default, the agent responds to the "public" community for read
# only access, if run out of the box without any configuration file in
# place. The following examples show you other ways of configuring
# the agent so that you can change the community names, and give
# yourself write access to the mib tree as well.
#
# For more information, read the FAQ as well as the snmpd.conf(5)
# manual page.
####
# First, map the community name "public" into a "security name"
# sec.name source community
com2sec notConfigUser default public
####
# Second, map the security name into a group name:
# groupName securityModel securityName
group notConfigGroup v1 notConfigUser
group notConfigGroup v2c notConfigUser
####
# Third, create a view for us to let the group have rights to:
# Make at least snmpwalk -v 1 localhost -c public system fast again.
# name incl/excl subtree mask(optional)
view systemview included .1.3.6.1.2.1
view systemview included .1.3.6.1.4.1.2021
view systemview included .1.3.6.1.2.1.1
view systemview included .1.3.6.1.2.1.25.1.1
####
# Finally, grant the group read-only access to the systemview view.
# group context sec.model sec.level prefix read write notif
access notConfigGroup "" any noauth exact systemview none none
# -----------------------------------------------------------------------------
# Here is a commented out example configuration that allows less
# restrictive access.
# YOU SHOULD CHANGE THE "COMMUNITY" TOKEN BELOW TO A NEW KEYWORD ONLY
# KNOWN AT YOUR SITE. YOU *MUST* CHANGE THE NETWORK TOKEN BELOW TO
# SOMETHING REFLECTING YOUR LOCAL NETWORK ADDRESS SPACE.
## sec.name source community
#com2sec local localhost COMMUNITY
#com2sec mynetwork NETWORK/24 COMMUNITY
## group.name sec.model sec.name
#group MyRWGroup any local
#group MyROGroup any mynetwork
#
#group MyRWGroup any otherv3user
#...
## incl/excl subtree mask
#view all included .1 80
## -or just the mib2 tree-
#view mib2 included .iso.org.dod.internet.mgmt.mib-2 fc
## context sec.model sec.level prefix read write notif
#access MyROGroup "" any noauth 0 all none none
#access MyRWGroup "" any noauth 0 all all all
###############################################################################
# Sample configuration to make net-snmpd RFC 1213.
# Unfortunately v1 and v2c don't allow any user based authentification, so
# opening up the default config is not an option from a security point.
#
# WARNING: If you uncomment the following lines you allow write access to your
# snmpd daemon from any source! To avoid this use different names for your
# community or split out the write access to a different community and
# restrict it to your local network.
# Also remember to comment the syslocation and syscontact parameters later as
# otherwise they are still read only (see FAQ for net-snmp).
#
# First, map the community name "public" into a "security name"
# sec.name source community
#com2sec notConfigUser default public
# Second, map the security name into a group name:
# groupName securityModel securityName
#group notConfigGroup v1 notConfigUser
#group notConfigGroup v2c notConfigUser
# Third, create a view for us to let the group have rights to:
# Open up the whole tree for ro, make the RFC 1213 required ones rw.
# name incl/excl subtree mask(optional)
#view roview included .1
#view rwview included system.sysContact
#view rwview included system.sysName
#view rwview included system.sysLocation
#view rwview included interfaces.ifTable.ifEntry.ifAdminStatus
#view rwview included at.atTable.atEntry.atPhysAddress
#view rwview included at.atTable.atEntry.atNetAddress
#view rwview included ip.ipForwarding
#view rwview included ip.ipDefaultTTL
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteDest
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteIfIndex
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric1
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric2
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric3
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric4
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteType
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteAge
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMask
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric5
#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaIfIndex
#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaPhysAddress
#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaNetAddress
#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaType
#view rwview included tcp.tcpConnTable.tcpConnEntry.tcpConnState
#view rwview included egp.egpNeighTable.egpNeighEntry.egpNeighEventTrigger
#view rwview included snmp.snmpEnableAuthenTraps
# Finally, grant the group read-only access to the systemview view.
# group context sec.model sec.level prefix read write notif
#access notConfigGroup "" any noauth exact roview rwview none
###############################################################################
# System contact information
#
# It is also possible to set the sysContact and sysLocation system
# variables through the snmpd.conf file:
syslocation Unknown (edit /etc/snmp/snmpd.conf)
syscontact Root <root@localhost> (configure /etc/snmp/snmp.local.conf)
# Example output of snmpwalk:
# % snmpwalk -v 1 localhost -c public system
# system.sysDescr.0 = "SunOS name sun4c"
# system.sysObjectID.0 = OID: enterprises.ucdavis.ucdSnmpAgent.sunos4
# system.sysUpTime.0 = Timeticks: (595637548) 68 days, 22:32:55
# system.sysContact.0 = "Me <me@somewhere.org>"
# system.sysName.0 = "name"
# system.sysLocation.0 = "Right here, right now."
# system.sysServices.0 = 72
###############################################################################
# Logging
#
# We do not want annoying "Connection from UDP: " messages in syslog.
# If the following option is commented out, snmpd will print each incoming
# connection, which can be useful for debugging.
dontLogTCPWrappersConnects yes
# -----------------------------------------------------------------------------
###############################################################################
# Process checks.
#
# The following are examples of how to use the agent to check for
# processes running on the host. The syntax looks something like:
#
# proc NAME [MAX=0] [MIN=0]
#
# NAME: the name of the process to check for. It must match
# exactly (ie, http will not find httpd processes).
# MAX: the maximum number allowed to be running. Defaults to 0.
# MIN: the minimum number to be running. Defaults to 0.
#
# Examples (commented out by default):
#
# Make sure mountd is running
#proc mountd
# Make sure there are no more than 4 ntalkds running, but 0 is ok too.
#proc ntalkd 4
# Make sure at least one sendmail, but less than or equal to 10 are running.
#proc sendmail 10 1
# A snmpwalk of the process mib tree would look something like this:
#
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.2
# enterprises.ucdavis.procTable.prEntry.prIndex.1 = 1
# enterprises.ucdavis.procTable.prEntry.prIndex.2 = 2
# enterprises.ucdavis.procTable.prEntry.prIndex.3 = 3
# enterprises.ucdavis.procTable.prEntry.prNames.1 = "mountd"
# enterprises.ucdavis.procTable.prEntry.prNames.2 = "ntalkd"
# enterprises.ucdavis.procTable.prEntry.prNames.3 = "sendmail"
# enterprises.ucdavis.procTable.prEntry.prMin.1 = 0
# enterprises.ucdavis.procTable.prEntry.prMin.2 = 0
# enterprises.ucdavis.procTable.prEntry.prMin.3 = 1
# enterprises.ucdavis.procTable.prEntry.prMax.1 = 0
# enterprises.ucdavis.procTable.prEntry.prMax.2 = 4
# enterprises.ucdavis.procTable.prEntry.prMax.3 = 10
# enterprises.ucdavis.procTable.prEntry.prCount.1 = 0
# enterprises.ucdavis.procTable.prEntry.prCount.2 = 0
# enterprises.ucdavis.procTable.prEntry.prCount.3 = 1
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.1 = 1
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.2 = 0
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.3 = 0
# enterprises.ucdavis.procTable.prEntry.prErrMessage.1 = "No mountd process running."
# enterprises.ucdavis.procTable.prEntry.prErrMessage.2 = ""
# enterprises.ucdavis.procTable.prEntry.prErrMessage.3 = ""
# enterprises.ucdavis.procTable.prEntry.prErrFix.1 = 0
# enterprises.ucdavis.procTable.prEntry.prErrFix.2 = 0
# enterprises.ucdavis.procTable.prEntry.prErrFix.3 = 0
#
# Note that the errorFlag for mountd is set to 1 because one is not
# running (in this case an rpc.mountd is, but thats not good enough),
# and the ErrMessage tells you what's wrong. The configuration
# imposed in the snmpd.conf file is also shown.
#
# Special Case: When the min and max numbers are both 0, it assumes
# you want a max of infinity and a min of 1.
#
# -----------------------------------------------------------------------------
###############################################################################
# Executables/scripts
#
#
# You can also have programs run by the agent that return a single
# line of output and an exit code. Here are two examples.
#
# exec NAME PROGRAM [ARGS ...]
#
# NAME: A generic name. The name must be unique for each exec statement.
# PROGRAM: The program to run. Include the path!
# ARGS: optional arguments to be passed to the program
# a simple hello world
#exec echotest /bin/echo hello world
# Run a shell script containing:
#
# #!/bin/sh
# echo hello world
# echo hi there
# exit 35
#
# Note: this has been specifically commented out to prevent
# accidental security holes due to someone else on your system writing
# a /tmp/shtest before you do. Uncomment to use it.
#
#exec shelltest /bin/sh /tmp/shtest
# Then,
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.8
# enterprises.ucdavis.extTable.extEntry.extIndex.1 = 1
# enterprises.ucdavis.extTable.extEntry.extIndex.2 = 2
# enterprises.ucdavis.extTable.extEntry.extNames.1 = "echotest"
# enterprises.ucdavis.extTable.extEntry.extNames.2 = "shelltest"
# enterprises.ucdavis.extTable.extEntry.extCommand.1 = "/bin/echo hello world"
# enterprises.ucdavis.extTable.extEntry.extCommand.2 = "/bin/sh /tmp/shtest"
# enterprises.ucdavis.extTable.extEntry.extResult.1 = 0
# enterprises.ucdavis.extTable.extEntry.extResult.2 = 35
# enterprises.ucdavis.extTable.extEntry.extOutput.1 = "hello world."
# enterprises.ucdavis.extTable.extEntry.extOutput.2 = "hello world."
# enterprises.ucdavis.extTable.extEntry.extErrFix.1 = 0
# enterprises.ucdavis.extTable.extEntry.extErrFix.2 = 0
# Note that the second line of the /tmp/shtest shell script is cut
# off. Also note that the exit status of 35 was returned.
# -----------------------------------------------------------------------------
###############################################################################
# disk checks
#
# The agent can check the amount of available disk space, and make
# sure it is above a set limit.
# disk PATH [MIN=100000]
#
# PATH: mount path to the disk in question.
# MIN: Disks with space below this value will have the Mib's errorFlag set.
# Default value = 100000.
# Check the / partition and make sure it contains at least 10 megs.
#disk / 10000
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.9
# enterprises.ucdavis.diskTable.dskEntry.diskIndex.1 = 0
# enterprises.ucdavis.diskTable.dskEntry.diskPath.1 = "/" Hex: 2F
# enterprises.ucdavis.diskTable.dskEntry.diskDevice.1 = "/dev/dsk/c201d6s0"
# enterprises.ucdavis.diskTable.dskEntry.diskMinimum.1 = 10000
# enterprises.ucdavis.diskTable.dskEntry.diskTotal.1 = 837130
# enterprises.ucdavis.diskTable.dskEntry.diskAvail.1 = 316325
# enterprises.ucdavis.diskTable.dskEntry.diskUsed.1 = 437092
# enterprises.ucdavis.diskTable.dskEntry.diskPercent.1 = 58
# enterprises.ucdavis.diskTable.dskEntry.diskErrorFlag.1 = 0
# enterprises.ucdavis.diskTable.dskEntry.diskErrorMsg.1 = ""
# -----------------------------------------------------------------------------
###############################################################################
# load average checks
#
# load [1MAX=12.0] [5MAX=12.0] [15MAX=12.0]
#
# 1MAX: If the 1 minute load average is above this limit at query
# time, the errorFlag will be set.
# 5MAX: Similar, but for 5 min average.
# 15MAX: Similar, but for 15 min average.
# Check for loads:
#load 12 14 14
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.10
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.1 = 1
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.2 = 2
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.3 = 3
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.1 = "Load-1"
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.2 = "Load-5"
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.3 = "Load-15"
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.1 = "0.49" Hex: 30 2E 34 39
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.2 = "0.31" Hex: 30 2E 33 31
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.3 = "0.26" Hex: 30 2E 32 36
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.1 = "12.00"
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.2 = "14.00"
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.3 = "14.00"
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.1 = 0
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.2 = 0
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.3 = 0
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.1 = ""
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.2 = ""
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.3 = ""
# -----------------------------------------------------------------------------
###############################################################################
# Extensible sections.
#
# This alleviates the multiple line output problem found in the
# previous executable mib by placing each mib in its own mib table:
# Run a shell script containing:
#
# #!/bin/sh
# echo hello world
# echo hi there
# exit 35
#
# Note: this has been specifically commented out to prevent
# accidental security holes due to someone else on your system writing
# a /tmp/shtest before you do. Uncomment to use it.
#
# exec .1.3.6.1.4.1.2021.50 shelltest /bin/sh /tmp/shtest
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.50
# enterprises.ucdavis.50.1.1 = 1
# enterprises.ucdavis.50.2.1 = "shelltest"
# enterprises.ucdavis.50.3.1 = "/bin/sh /tmp/shtest"
# enterprises.ucdavis.50.100.1 = 35
# enterprises.ucdavis.50.101.1 = "hello world."
# enterprises.ucdavis.50.101.2 = "hi there."
# enterprises.ucdavis.50.102.1 = 0
# Now the Output has grown to two lines, and we can see the 'hi
# there.' output as the second line from our shell script.
#
# Note that you must alter the mib.txt file to be correct if you want
# the .50.* outputs above to change to reasonable text descriptions.
# Other ideas:
#
# exec .1.3.6.1.4.1.2021.51 ps /bin/ps
# exec .1.3.6.1.4.1.2021.52 top /usr/local/bin/top
# exec .1.3.6.1.4.1.2021.53 mailq /usr/bin/mailq
# -----------------------------------------------------------------------------
###############################################################################
# Pass through control.
#
# Usage:
# pass MIBOID EXEC-COMMAND
#
# This will pass total control of the mib underneath the MIBOID
# portion of the mib to the EXEC-COMMAND.
#
# Note: You'll have to change the path of the passtest script to your
# source directory or install it in the given location.
#
# Example: (see the script for details)
# (commented out here since it requires that you place the
# script in the right location. (its not installed by default))
# pass .1.3.6.1.4.1.2021.255 /bin/sh /usr/local/local/passtest
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.255
# enterprises.ucdavis.255.1 = "life the universe and everything"
# enterprises.ucdavis.255.2.1 = 42
# enterprises.ucdavis.255.2.2 = OID: 42.42.42
# enterprises.ucdavis.255.3 = Timeticks: (363136200) 42 days, 0:42:42
# enterprises.ucdavis.255.4 = IpAddress: 127.0.0.1
# enterprises.ucdavis.255.5 = 42
# enterprises.ucdavis.255.6 = Gauge: 42
#
# % snmpget -v 1 localhost public .1.3.6.1.4.1.2021.255.5
# enterprises.ucdavis.255.5 = 42
#
# % snmpset -v 1 localhost public .1.3.6.1.4.1.2021.255.1 s "New string"
# enterprises.ucdavis.255.1 = "New string"
#
# For specific usage information, see the man/snmpd.conf.5 manual page
# as well as the local/passtest script used in the above example.
###############################################################################
# Further Information
#
# See the snmpd.conf manual page, and the output of "snmpd -H".
+484
View File
@@ -0,0 +1,484 @@
###############################################################################
#
# snmpd.conf:
# An example configuration file for configuring the ucd-snmp snmpd agent.
#
###############################################################################
#
# This file is intended to only be as a starting point. Many more
# configuration directives exist than are mentioned in this file. For
# full details, see the snmpd.conf(5) manual page.
#
# All lines beginning with a '#' are comments and are intended for you
# to read. All other lines are configuration commands for the agent.
###############################################################################
# Access Control
###############################################################################
# As shipped, the snmpd demon will only respond to queries on the
# system mib group until this file is replaced or modified for
# security purposes. Examples are shown below about how to increase the
# level of access.
# By far, the most common question I get about the agent is "why won't
# it work?", when really it should be "how do I configure the agent to
# allow me to access it?"
#
# By default, the agent responds to the "public" community for read
# only access, if run out of the box without any configuration file in
# place. The following examples show you other ways of configuring
# the agent so that you can change the community names, and give
# yourself write access to the mib tree as well.
#
# For more information, read the FAQ as well as the snmpd.conf(5)
# manual page.
####
# First, map the community name "public" into a "security name"
# sec.name source community
com2sec notConfigUser default public
####
# Second, map the security name into a group name:
# groupName securityModel securityName
group notConfigGroup v1 notConfigUser
group notConfigGroup v2c notConfigUser
####
# Third, create a view for us to let the group have rights to:
# Make at least snmpwalk -v 1 localhost -c public system fast again.
# name incl/excl subtree mask(optional)
#view systemview included .1.3.6.1.2.1
#view systemview included .1.3.6.1.4.1.2021
view systemview included .1.3.6.1.4.1.2021.10.1.3.1
view systemview included .1.3.6.1.4.1.2021.10.1.3.2
view systemview included .1.3.6.1.4.1.2021.10.1.3.3
view systemview included .1.3.6.1.4.1.2021.11.9.0
view systemview included .1.3.6.1.4.1.2021.4.5.0
view systemview included .1.3.6.1.4.1.2021.4.6.0
view systemview included .1.3.6.1.4.1.2021.4.3.0
view systemview included .1.3.6.1.4.1.2021.4.4.0
view systemview included .1.3.6.1.4.1.2021.4.14.0
view systemview included .1.3.6.1.4.1.2021.4.15.0
view systemview included .1.3.6.1.2.1.2.2.1.10
view systemview included .1.3.6.1.2.1.2.2.1.2
view systemview included .1.3.6.1.2.1.2.2.1.5
view systemview included .1.3.6.1.2.1.2.2.1.6
view systemview included .1.3.6.1.2.1.2.2.1.16
view systemview included .1.3.6.1.2.1.2.2.1.20
view systemview included .1.3.6.1.2.1.4.10.0
view systemview included .1.3.6.1.2.1.4.3.0
view systemview included .1.3.6.1.4.1.2021.11.11.0
view systemview included .1.3.6.1.2.1.1
view systemview included .1.3.6.1.2.1.25.1.1
####
# Finally, grant the group read-only access to the systemview view.
# group context sec.model sec.level prefix read write notif
access notConfigGroup "" any noauth exact systemview none none
# -----------------------------------------------------------------------------
# Here is a commented out example configuration that allows less
# restrictive access.
# YOU SHOULD CHANGE THE "COMMUNITY" TOKEN BELOW TO A NEW KEYWORD ONLY
# KNOWN AT YOUR SITE. YOU *MUST* CHANGE THE NETWORK TOKEN BELOW TO
# SOMETHING REFLECTING YOUR LOCAL NETWORK ADDRESS SPACE.
## sec.name source community
#com2sec local localhost COMMUNITY
#com2sec mynetwork NETWORK/24 COMMUNITY
## group.name sec.model sec.name
#group MyRWGroup any local
#group MyROGroup any mynetwork
#
#group MyRWGroup any otherv3user
#...
## incl/excl subtree mask
#view all included .1 80
## -or just the mib2 tree-
#view mib2 included .iso.org.dod.internet.mgmt.mib-2 fc
## context sec.model sec.level prefix read write notif
#access MyROGroup "" any noauth 0 all none none
#access MyRWGroup "" any noauth 0 all all all
###############################################################################
# Sample configuration to make net-snmpd RFC 1213.
# Unfortunately v1 and v2c don't allow any user based authentification, so
# opening up the default config is not an option from a security point.
#
# WARNING: If you uncomment the following lines you allow write access to your
# snmpd daemon from any source! To avoid this use different names for your
# community or split out the write access to a different community and
# restrict it to your local network.
# Also remember to comment the syslocation and syscontact parameters later as
# otherwise they are still read only (see FAQ for net-snmp).
#
# First, map the community name "public" into a "security name"
# sec.name source community
#com2sec notConfigUser default public
# Second, map the security name into a group name:
# groupName securityModel securityName
#group notConfigGroup v1 notConfigUser
#group notConfigGroup v2c notConfigUser
# Third, create a view for us to let the group have rights to:
# Open up the whole tree for ro, make the RFC 1213 required ones rw.
# name incl/excl subtree mask(optional)
#view roview included .1
#view rwview included system.sysContact
#view rwview included system.sysName
#view rwview included system.sysLocation
#view rwview included interfaces.ifTable.ifEntry.ifAdminStatus
#view rwview included at.atTable.atEntry.atPhysAddress
#view rwview included at.atTable.atEntry.atNetAddress
#view rwview included ip.ipForwarding
#view rwview included ip.ipDefaultTTL
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteDest
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteIfIndex
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric1
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric2
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric3
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric4
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteType
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteAge
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMask
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric5
#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaIfIndex
#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaPhysAddress
#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaNetAddress
#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaType
#view rwview included tcp.tcpConnTable.tcpConnEntry.tcpConnState
#view rwview included egp.egpNeighTable.egpNeighEntry.egpNeighEventTrigger
#view rwview included snmp.snmpEnableAuthenTraps
# Finally, grant the group read-only access to the systemview view.
# group context sec.model sec.level prefix read write notif
#access notConfigGroup "" any noauth exact roview rwview none
###############################################################################
# System contact information
#
# It is also possible to set the sysContact and sysLocation system
# variables through the snmpd.conf file:
syslocation Unknown (edit /etc/snmp/snmpd.conf)
syscontact Root <root@localhost> (configure /etc/snmp/snmp.local.conf)
# Example output of snmpwalk:
# % snmpwalk -v 1 localhost -c public system
# system.sysDescr.0 = "SunOS name sun4c"
# system.sysObjectID.0 = OID: enterprises.ucdavis.ucdSnmpAgent.sunos4
# system.sysUpTime.0 = Timeticks: (595637548) 68 days, 22:32:55
# system.sysContact.0 = "Me <me@somewhere.org>"
# system.sysName.0 = "name"
# system.sysLocation.0 = "Right here, right now."
# system.sysServices.0 = 72
###############################################################################
# Logging
#
# We do not want annoying "Connection from UDP: " messages in syslog.
# If the following option is commented out, snmpd will print each incoming
# connection, which can be useful for debugging.
dontLogTCPWrappersConnects yes
# -----------------------------------------------------------------------------
###############################################################################
# Process checks.
#
# The following are examples of how to use the agent to check for
# processes running on the host. The syntax looks something like:
#
# proc NAME [MAX=0] [MIN=0]
#
# NAME: the name of the process to check for. It must match
# exactly (ie, http will not find httpd processes).
# MAX: the maximum number allowed to be running. Defaults to 0.
# MIN: the minimum number to be running. Defaults to 0.
#
# Examples (commented out by default):
#
# Make sure mountd is running
#proc mountd
# Make sure there are no more than 4 ntalkds running, but 0 is ok too.
#proc ntalkd 4
# Make sure at least one sendmail, but less than or equal to 10 are running.
#proc sendmail 10 1
# A snmpwalk of the process mib tree would look something like this:
#
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.2
# enterprises.ucdavis.procTable.prEntry.prIndex.1 = 1
# enterprises.ucdavis.procTable.prEntry.prIndex.2 = 2
# enterprises.ucdavis.procTable.prEntry.prIndex.3 = 3
# enterprises.ucdavis.procTable.prEntry.prNames.1 = "mountd"
# enterprises.ucdavis.procTable.prEntry.prNames.2 = "ntalkd"
# enterprises.ucdavis.procTable.prEntry.prNames.3 = "sendmail"
# enterprises.ucdavis.procTable.prEntry.prMin.1 = 0
# enterprises.ucdavis.procTable.prEntry.prMin.2 = 0
# enterprises.ucdavis.procTable.prEntry.prMin.3 = 1
# enterprises.ucdavis.procTable.prEntry.prMax.1 = 0
# enterprises.ucdavis.procTable.prEntry.prMax.2 = 4
# enterprises.ucdavis.procTable.prEntry.prMax.3 = 10
# enterprises.ucdavis.procTable.prEntry.prCount.1 = 0
# enterprises.ucdavis.procTable.prEntry.prCount.2 = 0
# enterprises.ucdavis.procTable.prEntry.prCount.3 = 1
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.1 = 1
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.2 = 0
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.3 = 0
# enterprises.ucdavis.procTable.prEntry.prErrMessage.1 = "No mountd process running."
# enterprises.ucdavis.procTable.prEntry.prErrMessage.2 = ""
# enterprises.ucdavis.procTable.prEntry.prErrMessage.3 = ""
# enterprises.ucdavis.procTable.prEntry.prErrFix.1 = 0
# enterprises.ucdavis.procTable.prEntry.prErrFix.2 = 0
# enterprises.ucdavis.procTable.prEntry.prErrFix.3 = 0
#
# Note that the errorFlag for mountd is set to 1 because one is not
# running (in this case an rpc.mountd is, but thats not good enough),
# and the ErrMessage tells you what's wrong. The configuration
# imposed in the snmpd.conf file is also shown.
#
# Special Case: When the min and max numbers are both 0, it assumes
# you want a max of infinity and a min of 1.
#
# -----------------------------------------------------------------------------
###############################################################################
# Executables/scripts
#
#
# You can also have programs run by the agent that return a single
# line of output and an exit code. Here are two examples.
#
# exec NAME PROGRAM [ARGS ...]
#
# NAME: A generic name. The name must be unique for each exec statement.
# PROGRAM: The program to run. Include the path!
# ARGS: optional arguments to be passed to the program
# a simple hello world
#exec echotest /bin/echo hello world
# Run a shell script containing:
#
# #!/bin/sh
# echo hello world
# echo hi there
# exit 35
#
# Note: this has been specifically commented out to prevent
# accidental security holes due to someone else on your system writing
# a /tmp/shtest before you do. Uncomment to use it.
#
#exec shelltest /bin/sh /tmp/shtest
# Then,
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.8
# enterprises.ucdavis.extTable.extEntry.extIndex.1 = 1
# enterprises.ucdavis.extTable.extEntry.extIndex.2 = 2
# enterprises.ucdavis.extTable.extEntry.extNames.1 = "echotest"
# enterprises.ucdavis.extTable.extEntry.extNames.2 = "shelltest"
# enterprises.ucdavis.extTable.extEntry.extCommand.1 = "/bin/echo hello world"
# enterprises.ucdavis.extTable.extEntry.extCommand.2 = "/bin/sh /tmp/shtest"
# enterprises.ucdavis.extTable.extEntry.extResult.1 = 0
# enterprises.ucdavis.extTable.extEntry.extResult.2 = 35
# enterprises.ucdavis.extTable.extEntry.extOutput.1 = "hello world."
# enterprises.ucdavis.extTable.extEntry.extOutput.2 = "hello world."
# enterprises.ucdavis.extTable.extEntry.extErrFix.1 = 0
# enterprises.ucdavis.extTable.extEntry.extErrFix.2 = 0
# Note that the second line of the /tmp/shtest shell script is cut
# off. Also note that the exit status of 35 was returned.
# -----------------------------------------------------------------------------
###############################################################################
# disk checks
#
# The agent can check the amount of available disk space, and make
# sure it is above a set limit.
# disk PATH [MIN=100000]
#
# PATH: mount path to the disk in question.
# MIN: Disks with space below this value will have the Mib's errorFlag set.
# Default value = 100000.
# Check the / partition and make sure it contains at least 10 megs.
#disk / 10000
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.9
# enterprises.ucdavis.diskTable.dskEntry.diskIndex.1 = 0
# enterprises.ucdavis.diskTable.dskEntry.diskPath.1 = "/" Hex: 2F
# enterprises.ucdavis.diskTable.dskEntry.diskDevice.1 = "/dev/dsk/c201d6s0"
# enterprises.ucdavis.diskTable.dskEntry.diskMinimum.1 = 10000
# enterprises.ucdavis.diskTable.dskEntry.diskTotal.1 = 837130
# enterprises.ucdavis.diskTable.dskEntry.diskAvail.1 = 316325
# enterprises.ucdavis.diskTable.dskEntry.diskUsed.1 = 437092
# enterprises.ucdavis.diskTable.dskEntry.diskPercent.1 = 58
# enterprises.ucdavis.diskTable.dskEntry.diskErrorFlag.1 = 0
# enterprises.ucdavis.diskTable.dskEntry.diskErrorMsg.1 = ""
# -----------------------------------------------------------------------------
###############################################################################
# load average checks
#
# load [1MAX=12.0] [5MAX=12.0] [15MAX=12.0]
#
# 1MAX: If the 1 minute load average is above this limit at query
# time, the errorFlag will be set.
# 5MAX: Similar, but for 5 min average.
# 15MAX: Similar, but for 15 min average.
# Check for loads:
#load 12 14 14
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.10
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.1 = 1
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.2 = 2
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.3 = 3
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.1 = "Load-1"
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.2 = "Load-5"
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.3 = "Load-15"
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.1 = "0.49" Hex: 30 2E 34 39
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.2 = "0.31" Hex: 30 2E 33 31
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.3 = "0.26" Hex: 30 2E 32 36
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.1 = "12.00"
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.2 = "14.00"
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.3 = "14.00"
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.1 = 0
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.2 = 0
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.3 = 0
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.1 = ""
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.2 = ""
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.3 = ""
# -----------------------------------------------------------------------------
###############################################################################
# Extensible sections.
#
# This alleviates the multiple line output problem found in the
# previous executable mib by placing each mib in its own mib table:
# Run a shell script containing:
#
# #!/bin/sh
# echo hello world
# echo hi there
# exit 35
#
# Note: this has been specifically commented out to prevent
# accidental security holes due to someone else on your system writing
# a /tmp/shtest before you do. Uncomment to use it.
#
# exec .1.3.6.1.4.1.2021.50 shelltest /bin/sh /tmp/shtest
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.50
# enterprises.ucdavis.50.1.1 = 1
# enterprises.ucdavis.50.2.1 = "shelltest"
# enterprises.ucdavis.50.3.1 = "/bin/sh /tmp/shtest"
# enterprises.ucdavis.50.100.1 = 35
# enterprises.ucdavis.50.101.1 = "hello world."
# enterprises.ucdavis.50.101.2 = "hi there."
# enterprises.ucdavis.50.102.1 = 0
# Now the Output has grown to two lines, and we can see the 'hi
# there.' output as the second line from our shell script.
#
# Note that you must alter the mib.txt file to be correct if you want
# the .50.* outputs above to change to reasonable text descriptions.
# Other ideas:
#
# exec .1.3.6.1.4.1.2021.51 ps /bin/ps
# exec .1.3.6.1.4.1.2021.52 top /usr/local/bin/top
# exec .1.3.6.1.4.1.2021.53 mailq /usr/bin/mailq
# -----------------------------------------------------------------------------
###############################################################################
# Pass through control.
#
# Usage:
# pass MIBOID EXEC-COMMAND
#
# This will pass total control of the mib underneath the MIBOID
# portion of the mib to the EXEC-COMMAND.
#
# Note: You'll have to change the path of the passtest script to your
# source directory or install it in the given location.
#
# Example: (see the script for details)
# (commented out here since it requires that you place the
# script in the right location. (its not installed by default))
# pass .1.3.6.1.4.1.2021.255 /bin/sh /usr/local/local/passtest
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.255
# enterprises.ucdavis.255.1 = "life the universe and everything"
# enterprises.ucdavis.255.2.1 = 42
# enterprises.ucdavis.255.2.2 = OID: 42.42.42
# enterprises.ucdavis.255.3 = Timeticks: (363136200) 42 days, 0:42:42
# enterprises.ucdavis.255.4 = IpAddress: 127.0.0.1
# enterprises.ucdavis.255.5 = 42
# enterprises.ucdavis.255.6 = Gauge: 42
#
# % snmpget -v 1 localhost public .1.3.6.1.4.1.2021.255.5
# enterprises.ucdavis.255.5 = 42
#
# % snmpset -v 1 localhost public .1.3.6.1.4.1.2021.255.1 s "New string"
# enterprises.ucdavis.255.1 = "New string"
#
# For specific usage information, see the man/snmpd.conf.5 manual page
# as well as the local/passtest script used in the above example.
###############################################################################
# Further Information
#
# See the snmpd.conf manual page, and the output of "snmpd -H".
+464
View File
@@ -0,0 +1,464 @@
###############################################################################
#
# snmpd.conf:
# An example configuration file for configuring the ucd-snmp snmpd agent.
#
###############################################################################
#
# This file is intended to only be as a starting point. Many more
# configuration directives exist than are mentioned in this file. For
# full details, see the snmpd.conf(5) manual page.
#
# All lines beginning with a '#' are comments and are intended for you
# to read. All other lines are configuration commands for the agent.
###############################################################################
# Access Control
###############################################################################
# As shipped, the snmpd demon will only respond to queries on the
# system mib group until this file is replaced or modified for
# security purposes. Examples are shown below about how to increase the
# level of access.
# By far, the most common question I get about the agent is "why won't
# it work?", when really it should be "how do I configure the agent to
# allow me to access it?"
#
# By default, the agent responds to the "public" community for read
# only access, if run out of the box without any configuration file in
# place. The following examples show you other ways of configuring
# the agent so that you can change the community names, and give
# yourself write access to the mib tree as well.
#
# For more information, read the FAQ as well as the snmpd.conf(5)
# manual page.
####
# First, map the community name "public" into a "security name"
# sec.name source community
com2sec notConfigUser default public
####
# Second, map the security name into a group name:
# groupName securityModel securityName
group notConfigGroup v1 notConfigUser
group notConfigGroup v2c notConfigUser
####
# Third, create a view for us to let the group have rights to:
# Make at least snmpwalk -v 1 localhost -c public system fast again.
# name incl/excl subtree mask(optional)
view systemview included .1.3.6.1.2.1
view systemview included .1.3.6.1.4.1.2021
view systemview included .1.3.6.1.2.1.1
view systemview included .1.3.6.1.2.1.25.1.1
####
# Finally, grant the group read-only access to the systemview view.
# group context sec.model sec.level prefix read write notif
access notConfigGroup "" any noauth exact systemview none none
# -----------------------------------------------------------------------------
# Here is a commented out example configuration that allows less
# restrictive access.
# YOU SHOULD CHANGE THE "COMMUNITY" TOKEN BELOW TO A NEW KEYWORD ONLY
# KNOWN AT YOUR SITE. YOU *MUST* CHANGE THE NETWORK TOKEN BELOW TO
# SOMETHING REFLECTING YOUR LOCAL NETWORK ADDRESS SPACE.
## sec.name source community
#com2sec local localhost COMMUNITY
#com2sec mynetwork NETWORK/24 COMMUNITY
## group.name sec.model sec.name
#group MyRWGroup any local
#group MyROGroup any mynetwork
#
#group MyRWGroup any otherv3user
#...
## incl/excl subtree mask
#view all included .1 80
## -or just the mib2 tree-
#view mib2 included .iso.org.dod.internet.mgmt.mib-2 fc
## context sec.model sec.level prefix read write notif
#access MyROGroup "" any noauth 0 all none none
#access MyRWGroup "" any noauth 0 all all all
###############################################################################
# Sample configuration to make net-snmpd RFC 1213.
# Unfortunately v1 and v2c don't allow any user based authentification, so
# opening up the default config is not an option from a security point.
#
# WARNING: If you uncomment the following lines you allow write access to your
# snmpd daemon from any source! To avoid this use different names for your
# community or split out the write access to a different community and
# restrict it to your local network.
# Also remember to comment the syslocation and syscontact parameters later as
# otherwise they are still read only (see FAQ for net-snmp).
#
# First, map the community name "public" into a "security name"
# sec.name source community
#com2sec notConfigUser default public
# Second, map the security name into a group name:
# groupName securityModel securityName
#group notConfigGroup v1 notConfigUser
#group notConfigGroup v2c notConfigUser
# Third, create a view for us to let the group have rights to:
# Open up the whole tree for ro, make the RFC 1213 required ones rw.
# name incl/excl subtree mask(optional)
#view roview included .1
#view rwview included system.sysContact
#view rwview included system.sysName
#view rwview included system.sysLocation
#view rwview included interfaces.ifTable.ifEntry.ifAdminStatus
#view rwview included at.atTable.atEntry.atPhysAddress
#view rwview included at.atTable.atEntry.atNetAddress
#view rwview included ip.ipForwarding
#view rwview included ip.ipDefaultTTL
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteDest
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteIfIndex
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric1
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric2
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric3
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric4
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteType
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteAge
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMask
#view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric5
#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaIfIndex
#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaPhysAddress
#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaNetAddress
#view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaType
#view rwview included tcp.tcpConnTable.tcpConnEntry.tcpConnState
#view rwview included egp.egpNeighTable.egpNeighEntry.egpNeighEventTrigger
#view rwview included snmp.snmpEnableAuthenTraps
# Finally, grant the group read-only access to the systemview view.
# group context sec.model sec.level prefix read write notif
#access notConfigGroup "" any noauth exact roview rwview none
###############################################################################
# System contact information
#
# It is also possible to set the sysContact and sysLocation system
# variables through the snmpd.conf file:
syslocation Unknown (edit /etc/snmp/snmpd.conf)
syscontact Root <root@localhost> (configure /etc/snmp/snmp.local.conf)
# Example output of snmpwalk:
# % snmpwalk -v 1 localhost -c public system
# system.sysDescr.0 = "SunOS name sun4c"
# system.sysObjectID.0 = OID: enterprises.ucdavis.ucdSnmpAgent.sunos4
# system.sysUpTime.0 = Timeticks: (595637548) 68 days, 22:32:55
# system.sysContact.0 = "Me <me@somewhere.org>"
# system.sysName.0 = "name"
# system.sysLocation.0 = "Right here, right now."
# system.sysServices.0 = 72
###############################################################################
# Logging
#
# We do not want annoying "Connection from UDP: " messages in syslog.
# If the following option is commented out, snmpd will print each incoming
# connection, which can be useful for debugging.
dontLogTCPWrappersConnects yes
# -----------------------------------------------------------------------------
###############################################################################
# Process checks.
#
# The following are examples of how to use the agent to check for
# processes running on the host. The syntax looks something like:
#
# proc NAME [MAX=0] [MIN=0]
#
# NAME: the name of the process to check for. It must match
# exactly (ie, http will not find httpd processes).
# MAX: the maximum number allowed to be running. Defaults to 0.
# MIN: the minimum number to be running. Defaults to 0.
#
# Examples (commented out by default):
#
# Make sure mountd is running
#proc mountd
# Make sure there are no more than 4 ntalkds running, but 0 is ok too.
#proc ntalkd 4
# Make sure at least one sendmail, but less than or equal to 10 are running.
#proc sendmail 10 1
# A snmpwalk of the process mib tree would look something like this:
#
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.2
# enterprises.ucdavis.procTable.prEntry.prIndex.1 = 1
# enterprises.ucdavis.procTable.prEntry.prIndex.2 = 2
# enterprises.ucdavis.procTable.prEntry.prIndex.3 = 3
# enterprises.ucdavis.procTable.prEntry.prNames.1 = "mountd"
# enterprises.ucdavis.procTable.prEntry.prNames.2 = "ntalkd"
# enterprises.ucdavis.procTable.prEntry.prNames.3 = "sendmail"
# enterprises.ucdavis.procTable.prEntry.prMin.1 = 0
# enterprises.ucdavis.procTable.prEntry.prMin.2 = 0
# enterprises.ucdavis.procTable.prEntry.prMin.3 = 1
# enterprises.ucdavis.procTable.prEntry.prMax.1 = 0
# enterprises.ucdavis.procTable.prEntry.prMax.2 = 4
# enterprises.ucdavis.procTable.prEntry.prMax.3 = 10
# enterprises.ucdavis.procTable.prEntry.prCount.1 = 0
# enterprises.ucdavis.procTable.prEntry.prCount.2 = 0
# enterprises.ucdavis.procTable.prEntry.prCount.3 = 1
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.1 = 1
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.2 = 0
# enterprises.ucdavis.procTable.prEntry.prErrorFlag.3 = 0
# enterprises.ucdavis.procTable.prEntry.prErrMessage.1 = "No mountd process running."
# enterprises.ucdavis.procTable.prEntry.prErrMessage.2 = ""
# enterprises.ucdavis.procTable.prEntry.prErrMessage.3 = ""
# enterprises.ucdavis.procTable.prEntry.prErrFix.1 = 0
# enterprises.ucdavis.procTable.prEntry.prErrFix.2 = 0
# enterprises.ucdavis.procTable.prEntry.prErrFix.3 = 0
#
# Note that the errorFlag for mountd is set to 1 because one is not
# running (in this case an rpc.mountd is, but thats not good enough),
# and the ErrMessage tells you what's wrong. The configuration
# imposed in the snmpd.conf file is also shown.
#
# Special Case: When the min and max numbers are both 0, it assumes
# you want a max of infinity and a min of 1.
#
# -----------------------------------------------------------------------------
###############################################################################
# Executables/scripts
#
#
# You can also have programs run by the agent that return a single
# line of output and an exit code. Here are two examples.
#
# exec NAME PROGRAM [ARGS ...]
#
# NAME: A generic name. The name must be unique for each exec statement.
# PROGRAM: The program to run. Include the path!
# ARGS: optional arguments to be passed to the program
# a simple hello world
#exec echotest /bin/echo hello world
# Run a shell script containing:
#
# #!/bin/sh
# echo hello world
# echo hi there
# exit 35
#
# Note: this has been specifically commented out to prevent
# accidental security holes due to someone else on your system writing
# a /tmp/shtest before you do. Uncomment to use it.
#
#exec shelltest /bin/sh /tmp/shtest
# Then,
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.8
# enterprises.ucdavis.extTable.extEntry.extIndex.1 = 1
# enterprises.ucdavis.extTable.extEntry.extIndex.2 = 2
# enterprises.ucdavis.extTable.extEntry.extNames.1 = "echotest"
# enterprises.ucdavis.extTable.extEntry.extNames.2 = "shelltest"
# enterprises.ucdavis.extTable.extEntry.extCommand.1 = "/bin/echo hello world"
# enterprises.ucdavis.extTable.extEntry.extCommand.2 = "/bin/sh /tmp/shtest"
# enterprises.ucdavis.extTable.extEntry.extResult.1 = 0
# enterprises.ucdavis.extTable.extEntry.extResult.2 = 35
# enterprises.ucdavis.extTable.extEntry.extOutput.1 = "hello world."
# enterprises.ucdavis.extTable.extEntry.extOutput.2 = "hello world."
# enterprises.ucdavis.extTable.extEntry.extErrFix.1 = 0
# enterprises.ucdavis.extTable.extEntry.extErrFix.2 = 0
# Note that the second line of the /tmp/shtest shell script is cut
# off. Also note that the exit status of 35 was returned.
# -----------------------------------------------------------------------------
###############################################################################
# disk checks
#
# The agent can check the amount of available disk space, and make
# sure it is above a set limit.
# disk PATH [MIN=100000]
#
# PATH: mount path to the disk in question.
# MIN: Disks with space below this value will have the Mib's errorFlag set.
# Default value = 100000.
# Check the / partition and make sure it contains at least 10 megs.
#disk / 10000
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.9
# enterprises.ucdavis.diskTable.dskEntry.diskIndex.1 = 0
# enterprises.ucdavis.diskTable.dskEntry.diskPath.1 = "/" Hex: 2F
# enterprises.ucdavis.diskTable.dskEntry.diskDevice.1 = "/dev/dsk/c201d6s0"
# enterprises.ucdavis.diskTable.dskEntry.diskMinimum.1 = 10000
# enterprises.ucdavis.diskTable.dskEntry.diskTotal.1 = 837130
# enterprises.ucdavis.diskTable.dskEntry.diskAvail.1 = 316325
# enterprises.ucdavis.diskTable.dskEntry.diskUsed.1 = 437092
# enterprises.ucdavis.diskTable.dskEntry.diskPercent.1 = 58
# enterprises.ucdavis.diskTable.dskEntry.diskErrorFlag.1 = 0
# enterprises.ucdavis.diskTable.dskEntry.diskErrorMsg.1 = ""
# -----------------------------------------------------------------------------
###############################################################################
# load average checks
#
# load [1MAX=12.0] [5MAX=12.0] [15MAX=12.0]
#
# 1MAX: If the 1 minute load average is above this limit at query
# time, the errorFlag will be set.
# 5MAX: Similar, but for 5 min average.
# 15MAX: Similar, but for 15 min average.
# Check for loads:
#load 12 14 14
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.10
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.1 = 1
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.2 = 2
# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.3 = 3
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.1 = "Load-1"
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.2 = "Load-5"
# enterprises.ucdavis.loadTable.laEntry.loadaveNames.3 = "Load-15"
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.1 = "0.49" Hex: 30 2E 34 39
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.2 = "0.31" Hex: 30 2E 33 31
# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.3 = "0.26" Hex: 30 2E 32 36
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.1 = "12.00"
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.2 = "14.00"
# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.3 = "14.00"
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.1 = 0
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.2 = 0
# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.3 = 0
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.1 = ""
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.2 = ""
# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.3 = ""
# -----------------------------------------------------------------------------
###############################################################################
# Extensible sections.
#
# This alleviates the multiple line output problem found in the
# previous executable mib by placing each mib in its own mib table:
# Run a shell script containing:
#
# #!/bin/sh
# echo hello world
# echo hi there
# exit 35
#
# Note: this has been specifically commented out to prevent
# accidental security holes due to someone else on your system writing
# a /tmp/shtest before you do. Uncomment to use it.
#
# exec .1.3.6.1.4.1.2021.50 shelltest /bin/sh /tmp/shtest
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.50
# enterprises.ucdavis.50.1.1 = 1
# enterprises.ucdavis.50.2.1 = "shelltest"
# enterprises.ucdavis.50.3.1 = "/bin/sh /tmp/shtest"
# enterprises.ucdavis.50.100.1 = 35
# enterprises.ucdavis.50.101.1 = "hello world."
# enterprises.ucdavis.50.101.2 = "hi there."
# enterprises.ucdavis.50.102.1 = 0
# Now the Output has grown to two lines, and we can see the 'hi
# there.' output as the second line from our shell script.
#
# Note that you must alter the mib.txt file to be correct if you want
# the .50.* outputs above to change to reasonable text descriptions.
# Other ideas:
#
# exec .1.3.6.1.4.1.2021.51 ps /bin/ps
# exec .1.3.6.1.4.1.2021.52 top /usr/local/bin/top
# exec .1.3.6.1.4.1.2021.53 mailq /usr/bin/mailq
# -----------------------------------------------------------------------------
###############################################################################
# Pass through control.
#
# Usage:
# pass MIBOID EXEC-COMMAND
#
# This will pass total control of the mib underneath the MIBOID
# portion of the mib to the EXEC-COMMAND.
#
# Note: You'll have to change the path of the passtest script to your
# source directory or install it in the given location.
#
# Example: (see the script for details)
# (commented out here since it requires that you place the
# script in the right location. (its not installed by default))
# pass .1.3.6.1.4.1.2021.255 /bin/sh /usr/local/local/passtest
# % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.255
# enterprises.ucdavis.255.1 = "life the universe and everything"
# enterprises.ucdavis.255.2.1 = 42
# enterprises.ucdavis.255.2.2 = OID: 42.42.42
# enterprises.ucdavis.255.3 = Timeticks: (363136200) 42 days, 0:42:42
# enterprises.ucdavis.255.4 = IpAddress: 127.0.0.1
# enterprises.ucdavis.255.5 = 42
# enterprises.ucdavis.255.6 = Gauge: 42
#
# % snmpget -v 1 localhost public .1.3.6.1.4.1.2021.255.5
# enterprises.ucdavis.255.5 = 42
#
# % snmpset -v 1 localhost public .1.3.6.1.4.1.2021.255.1 s "New string"
# enterprises.ucdavis.255.1 = "New string"
#
# For specific usage information, see the man/snmpd.conf.5 manual page
# as well as the local/passtest script used in the above example.
###############################################################################
# Further Information
#
# See the snmpd.conf manual page, and the output of "snmpd -H".
+6
View File
@@ -0,0 +1,6 @@
<secret ephemeral='no' private='no'>
<uuid>565f7a01-3486-4a62-85bf-fbcc8490d7ca</uuid>
<usage type='ceph'>
<name>client.vms secret</name>
</usage>
</secret>
+2
View File
@@ -0,0 +1,2 @@
---
ansible_ssh_user: cephadmin
+71
View File
@@ -0,0 +1,71 @@
# This is the default ansible 'hosts' file.
#
# It should live in /etc/ansible/hosts
#
# - Comments begin with the '#' character
# - Blank lines are ignored
# - Groups of hosts are delimited by [header] elements
# - You can enter hostnames or ip addresses
# - A hostname/ip can be a member of multiple groups
# Ex 1: Ungrouped hosts, specify before any group headers.
## green.example.com
## blue.example.com
## 192.168.100.1
## 192.168.100.10
# Ex 2: A collection of hosts belonging to the 'webservers' group
## [webservers]
## alpha.example.org
## beta.example.org
## 192.168.1.100
## 192.168.1.110
# If you have multiple hosts following a pattern you can specify
# them like this:
## www[001:006].example.com
# Ex 3: A collection of database servers in the 'dbservers' group
## [dbservers]
##
## db01.intranet.mydomain.net
## db02.intranet.mydomain.net
## 10.25.1.56
## 10.25.1.57
# Here's another example of host ranges, this time there are no
# leading 0s:
## db-[99:101]-node.example.com
[bonchvisors]
bonchvisor04 ansible_ssh_host=172.17.2.54 ansible_user=cephadmin
bonchvisor05 ansible_ssh_host=172.17.2.55 ansible_user=cephadmin
bonchvisor06 ansible_ssh_host=172.17.2.56 ansible_user=cephadmin
bonchvisor07 ansible_ssh_host=172.17.2.57 ansible_user=cephadmin
bonchvisor08 ansible_ssh_host=172.17.2.58 ansible_user=cephadmin
bonchvisor09 ansible_ssh_host=172.17.2.59 ansible_user=cephadmin
bonchvisor10 ansible_ssh_host=172.17.2.60 ansible_user=cephadmin
bonchvisor11 ansible_ssh_host=172.17.2.61 ansible_user=cephadmin
bonchvisor12 ansible_ssh_host=172.17.2.62 ansible_user=cephadmin
[bonchvisors-small]
bonchvisor05 ansible_ssh_host=172.17.2.55
bonchvisor06 ansible_ssh_host=172.17.2.56
bonchvisor07 ansible_ssh_host=172.17.2.57
bonchvisor08 ansible_ssh_host=172.17.2.58
bonchvisor09 ansible_ssh_host=172.17.2.59
bonchvisor10 ansible_ssh_host=172.17.2.60
bonchvisor11 ansible_ssh_host=172.17.2.61
bonchvisor12 ansible_ssh_host=172.17.2.62
[bonchvisor-dpdk]
[controllers]
controller-ceph ansible_ssh_host=172.17.2.50
controller-virt ansible_ssh_host=172.17.2.100
controller-net ansible_ssh_host=172.17.2.200
+26
View File
@@ -0,0 +1,26 @@
- hosts: {{ your hosts }}
remote_user: {{ you users }}
become: true
become_user: root
become_method: sudo
tasks:
- name: ensure a list of packages installed
yum:
name: centos-release-openstack-pike
state: latest
- name: upgrade all packages
yum:
name: '*'
state: latest
- name: ensure a list of packages installed
yum:
name: "{{ packages }}"
vars:
packages:
- python-openstackclient
- openstack-selinux
+27
View File
@@ -0,0 +1,27 @@
---
- hosts: bonchvisors
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
tasks:
- name: Add hosts entry
lineinfile:
path: /etc/hosts
line: "{{ item.hosts }}"
with_items:
- { hosts: '172.17.3.54 bonchvisor04' }
- { hosts: '172.17.3.55 bonchvisor05' }
- { hosts: '172.17.3.56 bonchvisor06' }
- { hosts: '172.17.3.57 bonchvisor07' }
- { hosts: '172.17.3.58 bonchvisor08' }
- { hosts: '172.17.3.59 bonchvisor09' }
- { hosts: '172.17.3.60 bonchvisor10' }
- { hosts: '172.17.3.61 bonchvisor11' }
- { hosts: '172.17.3.62 bonchvisor12' }
- { hosts: '172.17.3.63 bonchvisor13' }
- { hosts: '172.17.3.64 bonchvisor14' }
- { hosts: '172.17.3.50 controller-ceph' }
- { hosts: '172.17.3.100 controller-virt' }
+58
View File
@@ -0,0 +1,58 @@
---
- hosts: bonchvisors
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
vars:
disk:
- sdb
- sdc
- sdd
- sde
tasks:
- name: detect lv
shell: pvscan | grep ceph | sed -n "1,4p" | awk '{print $4}'
args:
executable: /bin/bash
register: ceph_lv
- name: detect pv
shell: pvscan | grep ceph | sed -n "1,4p" | awk '{print $2}'
args:
executable: /bin/bash
register: ceph_pv
- name: list PV
debug:
msg: "{{ item }}"
loop: "{{ceph_pv.stdout_lines}}"
when: ceph_pv.stdout != ""
- name: delete VG
lvg:
vg: "{{ item }}"
state: absent
force: yes
loop: "{{ceph_lv.stdout_lines}}"
when: ceph_lv.stdout != ""
- name: delete pv
shell: pvremove -y {{ item }}
args:
executable: /bin/bash
loop: "{{ceph_pv.stdout_lines}}"
when: ceph_pv.stdout != ""
- name: wipe HDD
shell: wipefs -a /dev/{{item}}
args:
executable: /bin/bash
with_items: "{{ disk }}"
- name: delete partition info
shell: for i in b c d; do dd if=/dev/zero of=/dev/sd$i bs=512 count=1 conv=notrunc; done
args:
executable: /bin/bash
@@ -0,0 +1,72 @@
---
- hosts: bonchvisors
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
vars:
disk:
- sdb
- sdc
- sdd
- sde
tasks:
- name: detect lv
shell: pvscan | grep ceph | sed -n "1,4p" | awk '{print $4}'
args:
executable: /bin/bash
register: ceph_lv
- name: detect pv
shell: pvscan | grep ceph | sed -n "1,4p" | awk '{print $2}'
args:
executable: /bin/bash
register: ceph_pv
- name: list PV
debug:
msg: "{{ item }}"
loop: "{{ceph_pv.stdout_lines}}"
when: ceph_pv.stdout != ""
- name: list mounted ceph volume
shell: mount | grep ceph | grep -v tmpfs | awk '{print $3}'
args:
executable: /bin/bash
warn: false
register: ceph_mount
- name: umount OSD
shell: umount {{item}}
args:
executable: /bin/bash
loop: "{{ceph_mount.stdout_lines}}"
when: ceph_lv.stdout != ""
- name: delete VG
lvg:
vg: "{{ item }}"
state: absent
force: yes
loop: "{{ceph_lv.stdout_lines}}"
when: ceph_lv.stdout != ""
- name: delete pv
shell: pvremove -y {{ item }}
args:
executable: /bin/bash
loop: "{{ceph_pv.stdout_lines}}"
when: ceph_pv.stdout != ""
- name: wipe HDD
shell: wipefs -a /dev/{{item}}
args:
executable: /bin/bash
with_items: "{{ disk }}"
- name: delete partition info
shell: for i in b c d; do dd if=/dev/zero of=/dev/sd$i bs=512 count=1 conv=notrunc; done
args:
executable: /bin/bash
@@ -0,0 +1,43 @@
---
- hosts: bonchvisors
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
vars:
disk:
- sdb
- sdc
- sdd
tasks:
# - name: list variables
# debug:
# msg: "{{ item }}"
# loop: "{{ disk }}"
- name: wipe SSD
shell: wipefs -a /dev/sde
args:
executable: /bin/bash
- name: SSD to gpt
shell: parted -s /dev/sde mklabel gpt
args:
executable: /bin/bash
- name: create ssd {{disk[0]}} db partitions
shell: parted /dev/sde mkpart ceph-db-{{disk[0]}} ext2 0% 20%
args:
executable: /bin/bash
- name: create ssd {{disk[1]}} db partitions
shell: parted /dev/sde mkpart ceph-db-{{disk[1]}} ext2 20% 40%
args:
executable: /bin/bash
- name: create ssd {{disk[2]}} db partitions
shell: parted /dev/sde mkpart ceph-db-{{disk[2]}} ext2 40% 60%
args:
executable: /bin/bash
@@ -0,0 +1,39 @@
---
- hosts: bonchvisors
serial: 1
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
vars:
disk:
- sdb
- sdc
- sdd
dbpart:
- sde1
- sde2
- sde3
tasks:
# - name: list variables
# debug:
# msg: ceph-volume lvm create --bluestore --data /dev/{{disk[index]}} --block.db /dev/{{dbpart[index]}}
# loop: "{{ disk|flatten(levels=1) }}"
# loop_control:
# index_var: index
# - name: wipe HDD
# shell: wipefs -a /dev/{{item}}
# args:
# executable: /bin/bash
# with_items: "{{ disk }}"
- name: create OSD on hosts
shell: ceph-volume lvm create --bluestore --data /dev/{{disk[index]}} --block.db /dev/{{dbpart[index]}}
args:
executable: /bin/bash
loop: "{{ disk|flatten(levels=1) }}"
loop_control:
index_var: index
@@ -0,0 +1,41 @@
---
- hosts: bonchvisors
serial: 1
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
vars:
disk:
- sda
- sdb
- sdc
- sdd
dbpart:
- sde5
- sde6
- sde7
- sde8
tasks:
# - name: list variables
# debug:
# msg: ceph-volume lvm create --bluestore --data /dev/{{disk[index]}} --block.db /dev/{{dbpart[index]}}
# loop: "{{ disk|flatten(levels=1) }}"
# loop_control:
# index_var: index
# - name: wipe HDD
# shell: wipefs -a /dev/{{item}}
# args:
# executable: /bin/bash
# with_items: "{{ disk }}"
- name: create OSD on hosts
shell: ceph-volume lvm create --filestore --data /dev/{{disk[index]}} --journal /dev/{{dbpart[index]}}
args:
executable: /bin/bash
loop: "{{ disk|flatten(levels=1) }}"
loop_control:
index_var: index
@@ -0,0 +1 @@
bonchvisor04
+24
View File
@@ -0,0 +1,24 @@
---
- hosts: bonchvisors
serial: 11
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
tasks:
- name: detect osd number in array
shell: systemctl list-units --type=service --all | grep osd | awk '{print $1}' | awk -F "@" '{print $2}' | awk -F "." '{print $1}'
args:
executable: /bin/bash
register: osd_num
- name: delete osd
shell: ceph osd crush reweight osd.{{item}} 0.0; ceph osd out {{item}}; systemctl stop ceph-osd@{{item}}; ceph osd crush remove osd.{{item}}; ceph auth del osd.{{item}}; ceph osd rm {{item}}
args:
executable: /bin/bash
loop: "{{osd_num.stdout_lines}}"
when: osd_num.stdout != ""
@@ -0,0 +1,24 @@
---
- hosts: bonchvisors
serial: 11
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
tasks:
- name: detect osd number in array
shell: systemctl list-units --type=service --all | grep ceph-volume | awk '{print $1}'
args:
executable: /bin/bash
register: volume_service
- name: delete osd
systemd:
enabled: no
name: "{{item}}"
loop: "{{volume_service.stdout_lines}}"
when: volume_service.stdout != ""
@@ -0,0 +1,29 @@
---
- hosts: bonchvisor14
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
vars:
disk:
- sdb
- sdc
- sdd
- sde
tasks:
- name: Detect used service
shell: systemctl list-units --type=service --all | grep ceph | grep running | awk '{print $1}'
args:
executable: /bin/bash
warn: false
register: services
- name: Restart all services
shell: systemctl restart {{item}}
args:
executable: /bin/bash
warn: false
loop: "{{services.stdout_lines}}"
when: services.stdout != ""
@@ -0,0 +1,127 @@
---
- hosts: bonchvisors
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
tasks:
- name: get public ip address
shell: ip a | grep -v virbr0\:\ | grep -A2 br0\:\ | grep inet | awk '{print $2}' | awk -F "/" '{print $1}'
args:
executable: /bin/bash
register: public_ip
- name: get private ip address
shell: ip a | grep -v virbr0\:\ | grep -A2 br1\:\ | grep inet | awk '{print $2}' | awk -F "/" '{print $1}'
args:
executable: /bin/bash
register: private_ip
- name: create nova.conf file
copy:
src: /etc/ansible/files/nova.conf
dest: /etc/nova/nova.conf
owner: root
group: nova
mode: 0640
- name: create neutron.conf file
copy:
src: /etc/ansible/files/neutron.conf
dest: /etc/neutron/neutron.conf
owner: root
group: neutron
mode: 0640
- name: create linuxbridge_agent.ini file
copy:
src: /etc/ansible/files/linuxbridge_agent.ini
dest: /etc/neutron/plugins/ml2/linuxbridge_agent.ini
owner: root
group: neutron
mode: 0640
- name: copy secret.xml file
copy:
src: /etc/ansible/files/secret.xml
dest: /etc/ceph/secret.xml
owner: root
group: root
mode: 0640
- name: copy ml2_conf.ini file
copy:
src: /etc/ansible/files/ml2_conf.ini
dest: /etc/neutron/plugins/ml2/ml2_conf.ini
owner: root
group: root
mode: 0644
- name: copy client.cinder.key file
copy:
src: /etc/ansible/files/client.cinder.key
dest: /etc/ceph/client.cinder.key
owner: root
group: root
mode: 0640
- name: insert public_ip in nova.conf my_ip string
lineinfile:
path: /etc/nova/nova.conf
insertbefore: 'use_neutron=true'
line: 'my_ip={{item}}'
loop: "{{public_ip.stdout_lines}}"
when: public_ip.stdout != ""
- name: insert private_ip in linuxbridge_agent.ini local_ip string for overlay network
lineinfile:
path: /etc/neutron/plugins/ml2/linuxbridge_agent.ini
insertafter: '\[vxlan\]'
line: 'local_ip={{item}}'
loop: "{{private_ip.stdout_lines}}"
when: private_ip.stdout != ""
# - name: virsh secret define
# shell: virsh secret-define --file /etc/ceph/secret.xml
# args:
# executable: /bin/bash
# register: required_uuid
# - name: virsh secret set
# shell: virsh secret-set-value --secret $(echo {{ item }} | awk '{print $2}') --base64 $(cat /etc/ceph/client.cinder.key)
# args:
# executable: /bin/bash
# loop: "{{required_uuid.stdout_lines}}"
# when: required_uuid.stdout != ""
# - name: restart libvirtd services
# systemd:
# state: restarted
# enabled: yes
# daemon_reload: yes
# name: libvirtd.service
# - name: restart nova-compute services
# systemd:
# state: restarted
# enabled: yes
# daemon_reload: yes
# name: openstack-nova-compute.service
- name: restart libvirtd services
systemd:
state: restarted
enabled: yes
daemon_reload: yes
name: libvirtd.service
- name: restart neutron-linux-brigde-agent services
systemd:
state: restarted
enabled: yes
daemon_reload: yes
name: neutron-linuxbridge-agent.service
@@ -0,0 +1,92 @@
---
- hosts: bonchvisors
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
tasks:
- name: check ceph-mon service exist
shell: systemctl list-units --type=service --all | grep ceph-mon | awk '{print $1}'
args:
executable: /bin/bash
register: mon_service
# определение OSD
- name: find OSD and check if exist
shell: systemctl list-units --type=service --all | grep ceph-osd | awk '{print $1}'
args:
executable: /bin/bash
register: osd_service
- name: check ceph-mon service exist
shell: systemctl list-units --type=service --all | grep ceph-mon | awk '{print $1}'
args:
executable: /bin/bash
register: mon_service
# определение OSD
- name: find OSD and check if exist
shell: systemctl list-units --type=service --all | grep ceph-osd | awk '{print $1}'
args:
executable: /bin/bash
register: osd_service
# определение MGR
- name: check ceph-mgr service exist
shell: systemctl list-units --type=service --all | grep ceph-mgr | awk '{print $1}'
args:
executable: /bin/bash
register: mgr_service
- name: Change ceph-osd cpu affinity
lineinfile:
path: /usr/lib/systemd/system/ceph-osd@.service
insertbefore: '^RestartSec=*'
line: CPUAffinity=0,1
when: osd_service.stdout != ""
- name: Change ceph-mon cpu affinity
lineinfile:
path: /usr/lib/systemd/system/ceph-mon@.service
insertbefore: '^RestartSec=*'
line: CPUAffinity=0,1
when: mon_service.stdout != ""
- name: Change ceph-mgr cpu affinity
lineinfile:
path: /usr/lib/systemd/system/ceph-mgr@.service
insertbefore: '^StartLimitBurst=*'
line: CPUAffinity=0,1
when: mgr_service.stdout != ""
- name: restart ceph-osd service
systemd:
state: restarted
daemon_reload: yes
name: "{{ item }}"
loop: "{{osd_service.stdout_lines}}"
when: osd_service.stdout != ""
- name: restart ceph-mon service
systemd:
state: restarted
daemon_reload: yes
name: "{{ item }}"
loop: "{{mon_service.stdout_lines}}"
when: mon_service.stdout != ""
- name: restart ceph-mgr service
systemd:
state: restarted
daemon_reload: yes
name: "{{ item }}"
loop: "{{mgr_service.stdout_lines}}"
when: mgr_service.stdout != ""
+27
View File
@@ -0,0 +1,27 @@
---
- hosts: controllers
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
tasks:
- name: Add hosts entry
lineinfile:
path: /etc/hosts
line: "{{ item.hosts }}"
with_items:
- { hosts: '172.17.2.54 bonchvisor04' }
- { hosts: '172.17.2.55 bonchvisor05' }
- { hosts: '172.17.2.56 bonchvisor06' }
- { hosts: '172.17.2.57 bonchvisor07' }
- { hosts: '172.17.2.58 bonchvisor08' }
- { hosts: '172.17.2.59 bonchvisor09' }
- { hosts: '172.17.2.60 bonchvisor10' }
- { hosts: '172.17.2.61 bonchvisor11' }
- { hosts: '172.17.2.62 bonchvisor12' }
- { hosts: '172.17.3.50 controller-ceph' }
- { hosts: '172.17.3.100 controller-virt' }
- { hosts: '172.17.3.200 controller-net' }
+11
View File
@@ -0,0 +1,11 @@
bonchvisor04
bonchvisor05
bonchvisor06
bonchvisor07
bonchvisor08
bonchvisor09
bonchvisor10
bonchvisor11
bonchvisor12
bonchvisor13
bonchvisor14
+78
View File
@@ -0,0 +1,78 @@
---
- hosts: bonchvisors-small
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
tasks:
# - name: change MTU in br0 interface
# lineinfile:
# path: /etc/sysconfig/network-scripts/ifcfg-br0
# line: 'MTU=9000'
# - name: change MTU in br1 interface
# lineinfile:
# path: /etc/sysconfig/network-scripts/ifcfg-br1
# line: 'MTU=9000'
- name: change MTU in bond interface
lineinfile:
path: /etc/sysconfig/network-scripts/ifcfg-bond0
line: 'MTU=9000'
# - name: restart network service
# systemd:
# state: restarted
# daemon_reload: yes
# name: network
- name: Find 10Gbit network files
find:
paths: /etc/sysconfig/network-scripts/
patterns: "ifcfg-enp*"
register: files_matched
# - debug:
# msg: "{{ files_matched.files[0].path }}"
# - name: delete unproper ethtool options 1st device
# lineinfile:
# path: "{{ files_matched.files[0].path }}"
# line: '-K ${DEVICE} rx off tx off; -K ${DEVICE} tso off; -K ${DEVICE} gso off'
# state: absent
#
# - name: delete unproper ethtool options 2nd device
# lineinfile:
# path: "{{ files_matched.files[1].path }}"
# line: '-K ${DEVICE} rx off tx off; -K ${DEVICE} tso off; -K ${DEVICE} gso off'
# state: absent
- name: copy vlan165 file
copy:
src: /etc/ansible/files/ifcfg-vlan165
dest: /etc/sysconfig/network-scripts/ifcfg-vlan165
owner: root
group: root
mode: 0644
- name: copy br2 file
copy:
src: /etc/ansible/files/ifcfg-br2
dest: /etc/sysconfig/network-scripts/ifcfg-br2
owner: root
group: root
mode: 0644
- name: Change ethtool options 1st device
lineinfile:
path: "{{ files_matched.files[0].path }}"
line: 'ETHTOOL_OPTS="-K ${DEVICE} rx off tx off; -K ${DEVICE} tso off; -K ${DEVICE} gso off"'
- name: Change ethtool options 2nd device
lineinfile:
path: "{{ files_matched.files[1].path }}"
line: 'ETHTOOL_OPTS="-K ${DEVICE} rx off tx off; -K ${DEVICE} tso off; -K ${DEVICE} gso off"'
- name: restart network service
systemd:
state: restarted
daemon_reload: yes
name: network
@@ -0,0 +1,145 @@
---
- hosts: bonchvisors
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
tasks:
# - name: install openstack nova compute elements
# yum:
# name: "{{ packages }}"
# state: latest
# vars:
# packages:
# - openstack-neutron-linuxbridge
# - ebtables
# - ipset
# - openstack-nova-compute
# - openstack-neutron-ml2
# - openstack-neutron-openvswitch
- name: install snmp tool
yum:
name: "net-snmp"
state: latest
# - name: restart openvswitch services
# systemd:
# state: restarted
# enabled: yes
# daemon_reload: yes
# name: openvswitch.service
- name: get public ip address
shell: echo 172.17.2.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
args:
executable: /bin/bash
register: public_ip
- name: get private ip address
shell: echo 172.17.3.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
args:
executable: /bin/bash
register: private_ip
- name: get tunnel ip address
shell: echo 172.17.1.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
args:
executable: /bin/bash
register: tunnel_ip
# - name: create neutron config file
# template:
# src: /etc/ansible/files/openvswitch_agent.ini
# dest: /etc/neutron/plugins/ml2/openvswitch_agent.ini
# owner: root
# group: root
# mode: 0644
# add snmp firewall port
- firewalld:
immediate: yes
port: 161/udp
permanent: true
state: enabled
- name: create snmpd config file
template:
src: /etc/ansible/files/snmpd.conf
dest: /etc/snmp/snmpd.conf
owner: root
group: root
mode: 0644
- name: create nova config file
template:
src: /etc/ansible/files/nova.conf
dest: /etc/nova/nova.conf
owner: root
group: root
mode: 0644
- name: create neutron config file
template:
src: /etc/ansible/files/neutron.conf
dest: /etc/neutron/neutron.conf
owner: root
group: root
mode: 0644
- name: create ml2_conf.ini file
template:
src: /etc/ansible/files/ml2_conf.ini
dest: /etc/neutron/plugins/ml2/ml2_conf.ini
owner: root
group: root
mode: 0644
- name: create openvswitch_agent.ini file
template:
src: /etc/ansible/files/openvswitch_agent.ini
dest: /etc/neutron/plugins/ml2/openvswitch_agent.ini
owner: root
group: root
mode: 0644
- name: create ceilometer config file
template:
src: /etc/ansible/files/ceilometer.conf
dest: /etc/ceilometer/ceilometer.conf
owner: root
group: root
mode: 0644
- name: restart openstack-ceilometer-compute
systemd:
state: restarted
enabled: yes
daemon_reload: yes
name: openstack-ceilometer-compute
- name: restart openstack-nova-compute
systemd:
state: restarted
enabled: yes
daemon_reload: yes
name: openstack-nova-compute
- name: restart neutron-openvswitch-agent
systemd:
state: restarted
enabled: yes
daemon_reload: yes
name: neutron-openvswitch-agent
- name: restart snmpd
systemd:
state: restarted
enabled: yes
daemon_reload: yes
name: snmpd
@@ -0,0 +1,69 @@
---
- hosts: bonchvisors-dpdk
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
tasks:
# - name: install openstack nova compute elements
# yum:
# name: "{{ packages }}"
# state: latest
# vars:
# packages:
# - openstack-neutron-linuxbridge
# - ebtables
# - ipset
# - openstack-nova-compute
# - openstack-neutron-ml2
# - openstack-neutron-openvswitch
# - name: restart openvswitch services
# systemd:
# state: restarted
# enabled: yes
# daemon_reload: yes
# name: openvswitch.service
- name: get public ip address
shell: echo 172.17.2.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
args:
executable: /bin/bash
register: public_ip
- name: get private ip address
shell: echo 172.17.3.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
args:
executable: /bin/bash
register: private_ip
- name: configure kernel
default_hugepagesz=2M hugepagesz=2M hugepages=2048 iommu=pt intel_iommu=on isolcpus=3-5"q
- name: create openvswitch_agent.ini config file
template:
src: /etc/ansible/files/openvswitch_agent.ini
dest: /etc/neutron/plugins/ml2/openvswitch_agent.ini
owner: root
group: root
mode: 0644
- name: create ml2_conf.ini config file
template:
src: /etc/ansible/files/ml2_conf.ini
dest: /etc/neutron/plugins/ml2/ml2_conf.ini
owner: root
group: root
mode: 0644
- name: create nova.conf config file
template:
src: /etc/ansible/files/nova.conf
dest: /etc/nova/nova.conf
owner: root
group: root
mode: 0644
@@ -0,0 +1,225 @@
---
- hosts: bonchvisors
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
tasks:
# - name: install openstack nova compute elements
# yum:
# name: "{{ packages }}"
# state: latest
# vars:
# packages:
# - openstack-neutron-linuxbridge
# - ebtables
# - ipset
# - openstack-nova-compute
# - openstack-neutron-ml2
# - openstack-neutron-openvswitch
# - name: restart openvswitch services
# systemd:
# state: restarted
# enabled: yes
# daemon_reload: yes
# name: openvswitch.service
- name: get public ip address
shell: echo 172.17.2.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
args:
executable: /bin/bash
register: public_ip
- name: get private ip address
shell: echo 172.17.3.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
args:
executable: /bin/bash
register: private_ip
- name: get first interface name
shell: "ip a | grep enp | awk 'NR==1{print $2}' | tr -d :"
args:
executable: /bin/bash
register: firstport
- name: get second interface name
shell: "ip a | grep enp | awk 'NR==2{print $2}' | tr -d :"
args:
executable: /bin/bash
register: secondport
- name: collect old ifcfg-files
shell: ls /etc/sysconfig/network-scripts/ | grep ifcfg | grep -v 'ifcfg-lo\|ifcfg-ens1f0\|ens1f1' | awk '{print $1}'
args:
executable: /bin/bash
register: oldint
- name: delete old interface files
file:
state: absent
path: /etc/sysconfig/network-scripts/{{ item }}
loop: "{{oldint.stdout_lines}}"
when: oldint.stdout != ""
- name: cretae ifcfg-{{ firstport.stdout }} network config file
template:
src: /etc/ansible/files/networks/ifcfg-physicalif01
dest: /etc/sysconfig/network-scripts/ifcfg-{{ firstport.stdout }}
owner: root
group: root
mode: 0644
- name: cretae ifcfg-{{ secondport.stdout }} network config file
template:
src: /etc/ansible/files/networks/ifcfg-physicalif02
dest: /etc/sysconfig/network-scripts/ifcfg-{{ secondport.stdout }}
owner: root
group: root
mode: 0644
- name: cretae bond0 network config file
template:
src: /etc/ansible/files/networks/ifcfg-bond0
dest: /etc/sysconfig/network-scripts/ifcfg-bond0
owner: root
group: root
mode: 0644
- name: cretae main bridge network config file
template:
src: /etc/ansible/files/networks/ifcfg-br-ext-main
dest: /etc/sysconfig/network-scripts/ifcfg-br-ext-main
owner: root
group: root
mode: 0644
- name: cretae mgmt0 network config file
template:
src: /etc/ansible/files/networks/ifcfg-mgmt0
dest: /etc/sysconfig/network-scripts/ifcfg-mgmt0
owner: root
group: root
mode: 0644
- name: create internal port config file
template:
src: /etc/ansible/files/networks/ifcfg-port-int
dest: /etc/sysconfig/network-scripts/ifcfg-port-int
owner: root
group: root
mode: 0644
# - name: creat first externalbridge patchpanel network config file
# template:
# src: /etc/ansible/files/networks/ifcfg-patch-main-ext01
# dest: /etc/sysconfig/network-scripts/ifcfg-patch-main-ext01
# owner: root
# group: root
# mode: 0644
# - name: creat second external bridge patchpanel network config file
# template:
# src: /etc/ansible/files/networks/ifcfg-patch-main-ext02
# dest: /etc/sysconfig/network-scripts/ifcfg-patch-main-ext02
# owner: root
# group: root
# mode: 0644
- name: creat slave bridge patchpanel network config file
template:
src: /etc/ansible/files/networks/ifcfg-patch-main-slave
dest: /etc/sysconfig/network-scripts/ifcfg-patch-main-slave
owner: root
group: root
mode: 0644
- name: create neutron config file
template:
src: /etc/ansible/files/openvswitch_agent.ini
dest: /etc/neutron/plugins/ml2/openvswitch_agent.ini
owner: root
group: root
mode: 0644
- name: restart all network services and delete all ovs bridge
shell: ls /etc/sysconfig/network-scripts/ | grep ifcfg | grep -v 'ifcfg-lo\|ifcfg-ens1f0\|ens1f1\|enp\|bond0' | awk '{print $1}' | sed 's/ifcfg-//g'| while read line; do ip link set dev $line down && ip link delete $line; done; ovs-vsctl list-br | awk "{print $1}" | while read line; do ovs-vsctl --if-exist del-br $line; done; systemctl restart network; systemctl restart network
args:
executable: /bin/bash
#slave bridge creation
# - name: detect all bridges, except ovs-main
# shell: ovs-vsctl list-br | grep -v "ovs-main" | awk "{print $1}"
# args:
# executable: /bin/bash
# register: oldbridges
# - name: clear all bridges, except ovs-main
# shell: ovs-vsctl --if-exist del-br {{ item }}
# args:
# executable: /bin/bash
# loop: "{{oldbridges.stdout_lines}}"
# when: oldbridges.stdout != ""
- name: create slave bridge
shell: ovs-vsctl --may-exist add-br br-slave && ovs-vsctl set int br-slave mtu_request=9000
args:
executable: /bin/bash
- name: create fake management bridge
shell: ovs-vsctl --may-exist add-br br-mgmt-fake br-slave 162 && ovs-vsctl set int br-mgmt-fake mtu_request=9000
args:
executable: /bin/bash
- name: create fake interconnect bridge
shell: ovs-vsctl --may-exist add-br br-ic-fake br-slave 163 && ovs-vsctl set int br-ic-fake mtu_request=9000
args:
executable: /bin/bash
- name: create patchport -- br-slave to br-ext-main
shell: ovs-vsctl --may-exist add-port br-slave patch-slave-main && ovs-vsctl set int patch-slave-main mtu_request=9000
args:
executable: /bin/bash
- name: connect patchport -- br-slave to br-ext-main
shell: ovs-vsctl set interface patch-slave-main type=patch options:peer=patch-main-slave
args:
executable: /bin/bash
- name: create external bridge
shell: ovs-vsctl --may-exist add-br br-ext && ovs-vsctl set int br-ext mtu_request=9000
args:
executable: /bin/bash
- name: create patchport -- br-ext to br-ext-main
shell: ovs-vsctl --may-exist add-port br-ext patch-ext-main && ovs-vsctl set int patch-ext-main mtu_request=8996
args:
executable: /bin/bash
- name: connect patchport -- br-ext to br-ext-main
shell: ovs-vsctl set interface patch-ext-main type=patch options:peer=patch-main-ext
args:
executable: /bin/bash
- name: restart neutron-openvswitch
systemd:
state: restarted
enabled: yes
daemon_reload: yes
name: neutron-openvswitch-agent.service
# postconfig
#
# - name: set physical interface MTU
# shell: ovs-vsctl set int {{ firstport.stdout }} mtu_request=9000 && ovs-vsctl set int {{ secondport.stdout }} mtu_request=9000
# args:
# executable: /bin/bash
@@ -0,0 +1,188 @@
---
- hosts: bonchvisors
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
tasks:
# - name: install openstack nova compute elements
# yum:
# name: "{{ packages }}"
# state: latest
# vars:
# packages:
# - openstack-neutron-linuxbridge
# - ebtables
# - ipset
# - openstack-nova-compute
# - openstack-neutron-ml2
# - openstack-neutron-openvswitch
# - name: restart openvswitch services
# systemd:
# state: restarted
# enabled: yes
# daemon_reload: yes
# name: openvswitch.service
- name: get public ip address
shell: echo 172.17.2.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
args:
executable: /bin/bash
register: public_ip
- name: get private ip address
shell: echo 172.17.3.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
args:
executable: /bin/bash
register: private_ip
- name: get first interface name
shell: "ip a | grep enp | awk 'NR==1{print $2}' | tr -d :"
args:
executable: /bin/bash
register: firstport
- name: get second interface name
shell: "ip a | grep enp | awk 'NR==2{print $2}' | tr -d :"
args:
executable: /bin/bash
register: secondport
- name: collect old ifcfg-files
shell: ls /etc/sysconfig/network-scripts/ | grep ifcfg | grep -v 'ifcfg-lo\|ifcfg-ens1f0\|ens1f1' | awk '{print $1}'
args:
executable: /bin/bash
register: oldint
- name: delete old interface files
file:
state: absent
path: /etc/sysconfig/network-scripts/{{ item }}
loop: "{{oldint.stdout_lines}}"
when: oldint.stdout != ""
- name: cretae ifcfg-{{ firstport.stdout }} network config file
template:
src: /etc/ansible/files/networks/ifcfg-physicalif01
dest: /etc/sysconfig/network-scripts/ifcfg-{{ firstport.stdout }}
owner: root
group: root
mode: 0644
- name: cretae ifcfg-{{ secondport.stdout }} network config file
template:
src: /etc/ansible/files/networks/ifcfg-physicalif02
dest: /etc/sysconfig/network-scripts/ifcfg-{{ secondport.stdout }}
owner: root
group: root
mode: 0644
- name: cretae bond0 network config file
template:
src: /etc/ansible/files/networks/ifcfg-bond0
dest: /etc/sysconfig/network-scripts/ifcfg-bond0
owner: root
group: root
mode: 0644
- name: cretae main bridge network config file
template:
src: /etc/ansible/files/networks/ifcfg-main-bridge
dest: /etc/sysconfig/network-scripts/ifcfg-ovs-main
owner: root
group: root
mode: 0644
- name: cretae mgmt0 network config file
template:
src: /etc/ansible/files/networks/ifcfg-mgmt0
dest: /etc/sysconfig/network-scripts/ifcfg-mgmt0
owner: root
group: root
mode: 0644
- name: create main bridge network config file
template:
src: /etc/ansible/files/networks/ifcfg-port-int
dest: /etc/sysconfig/network-scripts/ifcfg-port-int
owner: root
group: root
mode: 0644
- name: create patchpanel network config file
template:
src: /etc/ansible/files/networks/ifcfg-ovs-patch0
dest: /etc/sysconfig/network-scripts/ifcfg-ovs-patch0
owner: root
group: root
mode: 0644
- name: create neutron config file
template:
src: /etc/ansible/files/openvswitch_agent.ini
dest: /etc/neutron/plugins/ml2/openvswitch_agent.ini
owner: root
group: root
mode: 0644
#slave bridge creation
- name: create ovs-slave bridge
shell: ovs-vsctl --may-exist add-br ovs-slave && ovs-vsctl set int ovs-slave mtu_request=9000
args:
executable: /bin/bash
- name: create management bridge
shell: ovs-vsctl --may-exist add-br br-mgmt ovs-slave 162 && ovs-vsctl set int br-mgmt mtu_request=9000
args:
executable: /bin/bash
- name: create internal bridge
shell: ovs-vsctl --may-exist add-br br-ic ovs-slave 163 && ovs-vsctl set int br-ic mtu_request=9000
args:
executable: /bin/bash
- name: create first external bridge
shell: ovs-vsctl --may-exist add-br br-ext01 ovs-slave 160 && ovs-vsctl set int br-ext01 mtu_request=9000
args:
executable: /bin/bash
- name: create second external bridge
shell: ovs-vsctl --may-exist add-br br-ext02 ovs-slave 165 && ovs-vsctl set int br-ext02 mtu_request=9000
args:
executable: /bin/bash
- name: create patchport to ovs-main
shell: ovs-vsctl --may-exist add-port ovs-slave patch1 && ovs-vsctl set int patch1 mtu_request=9000
args:
executable: /bin/bash
- name: connect patchport to ovs-main
shell: ovs-vsctl set interface patch1 type=patch options:peer=patch0
args:
executable: /bin/bash
- name: restart network services
shell: ls /etc/sysconfig/network-scripts/ | grep ifcfg | grep -v 'ifcfg-lo\|ifcfg-ens1f0\|ens1f1\|enp' | awk '{print $1}' | sed 's/ifcfg-//g'| while read line; do ip link set dev $line down && ip link delete $line; done && systemctl restart network; systemctl restart network
args:
executable: /bin/bash
- name: restart neutron-openvswitch
systemd:
state: restarted
enabled: yes
daemon_reload: yes
name: neutron-openvswitch-agent.service
# postconfig
- name: set physical interface MTU
shell: ovs-vsctl set int {{ firstport.stdout }} mtu_request=9000 && ovs-vsctl set int {{ secondport.stdout }} mtu_request=9000
args:
executable: /bin/bash
@@ -0,0 +1,37 @@
---
- hosts: bonchvisors
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
tasks:
- name: create libvirtd.conf file
template:
src: /etc/ansible/files/libvirtd.conf
dest: /etc/libvirt/libvirtd.conf
owner: root
group: root
mode: 0644
- name: cretae libvirtd file for port listening
template:
src: /etc/ansible/files/libvirtd
dest: /etc/sysconfig/libvirtd
owner: root
group: root
mode: 0644
- name: cretae firewalld rule
shell: firewall-cmd --add-port 49152-49216/tcp --permanent; firewall-cmd --add-port 16509/tcp --permanent; firewall-cmd --reload
args:
executable: /bin/bash
- name: restart libvirtd
systemd:
state: restarted
enabled: yes
daemon_reload: yes
name: libvirtd.service
+32
View File
@@ -0,0 +1,32 @@
---
- hosts: bonchvisors
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
tasks:
tasks:
- name: create nested-vm enabling file
copy:
src: /etc/ansible/files/kvm-nested.conf
dest: /etc/modprobe.d/kvm-nested.conf
owner: root
group: root
mode: 0644
- name: disable && enable kvm_intel module
shell: modprobe -r kvm_intel && modprobe -a kvm_intel
args:
executable: /bin/bash
- name: check nested vm enabled
shell: cat /sys/module/kvm_intel/parameters/nested
args:
executable: /bin/bash
register: nested_vm
- name: get nested vm enabled state
debug:
msg: "{{ nested_vm.stdout }}"
@@ -0,0 +1,42 @@
---
- hosts: bonchvisors
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
tasks:
- name: enable isolcpu and hugepages in kernel
shell: grep GRUB_CMDLINE_LINUX /etc/default/grub | grep -c "hugepages" || true
register: hugepages_status
ignore_errors: true
- name: enable isolcpu in kernel
shell: grep GRUB_CMDLINE_LINUX /etc/default/grub | grep -c "isolcpus" || true
register: isolcpu_status
ignore_errors: true
- name: Enable isolcpu in grub
lineinfile: dest="/etc/default/grub" regexp='GRUB_CMDLINE_LINUX="(.*)"' line='GRUB_CMDLINE_LINUX="\1 isolcpus=2-3"' backrefs=yes
when: isolcpu_status.stdout == "0"
- name: Enable hugepages in grub
lineinfile: dest="/etc/default/grub" regexp='GRUB_CMDLINE_LINUX="(.*)"' line='GRUB_CMDLINE_LINUX="\1 hugepages=512"' backrefs=yes
when: hugepages_status.stdout == "0"
- name: check if hugepages fstab entry exist
shell: grep "^hugetlbfs" /etc/fstab || true
args:
executable: /bin/bash
register: test_grep
- name: test_grep results
debug:
msg: "{{ test_grep.stdout }}"
- name: modify fstab
lineinfile:
path: /etc/fstab
line: "nodev /mnt/huge hugetlbfs defaults 0 0"
when: test_grep.stdout == ""
@@ -0,0 +1,318 @@
---
- hosts: bonchvisor04
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
tasks:
- name: install repos
yum:
name: "{{ packages }}"
state: latest
vars:
packages:
- epel-release
- https://rdoproject.org/repos/rdo-release.rpm
- https://download.ceph.com/rpm-luminous/el7/noarch/ceph-release-1-1.el7.noarch.rpm
- name: install initial components
yum:
name: "{{ packages }}"
state: latest
vars:
packages:
- net-tools
- chrony
- openvswitch
- qemu-kvm
- virt-install
- libvirt
- libvirt-python
- virt-manager
- policycoreutils-python
- libibverbs
- driverctl
- libguestfs-tools
- python2-pip
- name: get public ip address
shell: echo 172.17.1.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
args:
executable: /bin/bash
register: public_ip
- name: get private ip address
shell: echo 172.17.2.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
args:
executable: /bin/bash
register: private_ip
- name: get tun ip address
shell: echo 172.17.3.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
args:
executable: /bin/bash
register: tun_ip
- name: get first interface name
shell: "ip a | grep enp | awk 'NR==1{print $2}' | tr -d :"
args:
executable: /bin/bash
register: firstport
- name: get second interface name
shell: "ip a | grep enp | awk 'NR==2{print $2}' | tr -d :"
args:
executable: /bin/bash
register: secondport
- name: Add hosts entry
lineinfile:
path: /etc/hosts
line: "{{ item.hosts }}"
with_items:
- { hosts: '172.17.2.54 bonchvisor04' }
- { hosts: '172.17.2.55 bonchvisor05' }
- { hosts: '172.17.2.56 bonchvisor06' }
- { hosts: '172.17.2.57 bonchvisor07' }
- { hosts: '172.17.2.58 bonchvisor08' }
- { hosts: '172.17.2.59 bonchvisor09' }
- { hosts: '172.17.2.60 bonchvisor10' }
- { hosts: '172.17.2.61 bonchvisor11' }
- { hosts: '172.17.2.62 bonchvisor12' }
- { hosts: '172.17.2.50 controller-ceph' }
- { hosts: '172.17.2.100 controller-virt' }
- { hosts: '172.17.2.200 controller-net' }
- name: copy chrony file
copy:
src: /etc/ansible/files/chrony.conf
dest: /etc/chrony.conf
owner: root
group: root
mode: 0640
- name: insert uio_pci_generic module
shell: modprobe uio_pci_generic
args:
executable: /bin/bash
- name: copy uio_pci_generic module file to autostart
copy: src=/etc/ansible/files/dpdk.conf dest=/etc/modules-load.d/dpdk.conf owner=root group=root mode=0640
- name: detect dpdk interface name
shell: driverctl -v list-devices | grep -i net | grep 82576 | awk '{print $1}'
args:
executable: /bin/bash
register: dpdk_bus
- name: change dpdk device#1 driver
shell: driverctl set-override {{ dpdk_bus.stdout_lines[0] }} uio_pci_generic
args:
executable: /bin/bash
- name: change dpdk device#2 driver
shell: driverctl set-override {{ dpdk_bus.stdout_lines[1] }} uio_pci_generic
args:
executable: /bin/bash
- name: upload selinux modules
copy: src=/etc/ansible/files/{{ item }} dest=/tmp owner=root group=root mode=0640
with_items:
- ovs-vswitchd.pp
- ovsdb-server.pp
- name: install selinux modules
shell: semodule -i /tmp/{{ item }}
with_items:
- ovs-vswitchd.pp
- ovsdb-server.pp
- name: copy grub file to load hugepages
copy: src=/etc/ansible/files/grub dest=/etc/default owner=root group=root mode=0640
- name: modify grub to load hugepages
shell: grub2-mkconfig -o /boot/efi/EFI/centos/grub.cfg
args:
executable: /bin/bash
- name: check if hugepages fstab entry exist
shell: grep "^hugetlbfs" /etc/fstab || true
args:
executable: /bin/bash
register: test_grep
- name: modify fstab
lineinfile:
path: /etc/grub
line: 'nodev /mnt/huge hugetlbfs defaults 0 0'
when: test_grep.stdout != ""
- name: Creates directory
file:
path: /mnt/huge
state: directory
- name: copy systemd service file to use hugepages on node0
copy:
src: /etc/ansible/files/hugetlb-gigantic-pages.service
dest: /usr/lib/systemd/system/hugetlb-gigantic-pages.service
owner: root
group: root
mode: 0640
- name: copy bash script file to use hugepages
copy:
src: /etc/ansible/files/hugetlb-reserve-pages.sh
dest: /usr/lib/systemd/hugetlb-reserve-pages.sh
owner: root
group: root
mode: 0750
- name: modify openvswitch startup users
replace:
path: /etc/sysconfig/openvswitch
regexp: '^OVS_USER_ID(.*)$'
replace: 'OVS_USER_ID="root:root"'
- name: enable and start libvirtd services
systemd:
state: started
enabled: yes
daemon_reload: yes
name: libvirtd.service
- name: enable and start chronyd services
systemd:
state: started
enabled: yes
daemon_reload: yes
name: chronyd.service
- name: enable and start service hugetlb-gigantic-pages
systemd:
state: started
name: hugetlb-gigantic-pages
enabled: yes
daemon_reload: yes
- name: enable and start opevswitchd
systemd:
state: started
name: openvswitch
enabled: yes
- name: ovs enable dpdk
shell: ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-init="true"
args:
executable: /bin/bash
- name: ovs dpdk config cpu mask
shell: ovs-vsctl --no-wait set Open_vSwitch . other_config:pmd-cpu-mask=0x4
args:
executable: /bin/bash
- name: ovs dpdk config memory usage
shell: ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-socket-mem="1024,0"
args:
executable: /bin/bash
- name: config dpdk port
shell: ovs-vsctl --may-exist add-br br-dpdk -- set bridge br-dpdk datapath_type=netdev
args:
executable: /bin/bash
- name: add dpdk port
shell: ovs-vsctl --may-exist add-bond br-dpdk dpdkbond p0 p1 lacp=active bond_mode=balance-tcp
args:
executable: /bin/bash
- name: add dpdk port
shell: ovs-vsctl set Interface p0 type=dpdk options:dpdk-devargs={{ dpdk_bus.stdout_lines[0] }}
args:
executable: /bin/bash
- name: add dpdk port
shell: ovs-vsctl set Interface p1 type=dpdk options:dpdk-devargs={{ dpdk_bus.stdout_lines[1] }}
args:
executable: /bin/bash
- name: collect old ifcfg-files
shell: ls /etc/sysconfig/network-scripts/ | grep ifcfg | grep -v 'ifcfg-lo\|ifcfg-ens1f0\|ens1f1' | awk '{print $1}'
args:
executable: /bin/bash
register: oldint
- name: delete old interface files
file:
state: absent
path: /etc/sysconfig/network-scripts/{{ item }}
loop: "{{oldint.stdout_lines}}"
when: oldint.stdout != ""
- name: cretae ifcfg-{{ firstport.stdout }} network config file
template:
src: /etc/ansible/files/networks/ifcfg-physicalif01
dest: /etc/sysconfig/network-scripts/ifcfg-{{ firstport.stdout }}
owner: root
group: root
mode: 0644
- name: cretae ifcfg-{{ secondport.stdout }} network config file
template:
src: /etc/ansible/files/networks/ifcfg-physicalif02
dest: /etc/sysconfig/network-scripts/ifcfg-{{ secondport.stdout }}
owner: root
group: root
mode: 0644
- name: create bond0 network config file
template:
src: /etc/ansible/files/networks/ifcfg-bond0
dest: /etc/sysconfig/network-scripts/ifcfg-bond0
owner: root
group: root
mode: 0644
- name: cretae main bridge network config file
template:
src: /etc/ansible/files/networks/ifcfg-br-ext-main
dest: /etc/sysconfig/network-scripts/ifcfg-br-ext-main
owner: root
group: root
mode: 0644
- name: cretae mgmt0 network config file
template:
src: /etc/ansible/files/networks/ifcfg-mgmt0
dest: /etc/sysconfig/network-scripts/ifcfg-mgmt0
owner: root
group: root
mode: 0644
- name: create int port network config file
template:
src: /etc/ansible/files/networks/ifcfg-port-int
dest: /etc/sysconfig/network-scripts/ifcfg-port-int
owner: root
group: root
mode: 0644
- name: create tun port network config file
template:
src: /etc/ansible/files/networks/ifcfg-port-tun
dest: /etc/sysconfig/network-scripts/ifcfg-port-tun
owner: root
group: root
mode: 0644
- name: remove NetworkManager
yum:
name: NetworkManager*
state: absent
# - name: reboot to apply grub changes
# reboot:
@@ -0,0 +1,333 @@
---
- hosts: bonchvisor10
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
tasks:
- name: install repos
yum:
name: "{{ packages }}"
state: latest
vars:
packages:
- epel-release
- https://rdoproject.org/repos/rdo-release.rpm
- https://download.ceph.com/rpm-luminous/el7/noarch/ceph-release-1-1.el7.noarch.rpm
- name: install initial components
yum:
name: "{{ packages }}"
state: latest
vars:
packages:
- net-tools
- chrony
- openvswitch
- qemu-kvm
- virt-install
- libvirt
- libvirt-python
- virt-manager
- policycoreutils-python
- libibverbs
- driverctl
- libguestfs-tools
- python2-pip
- name: get public ip address
shell: echo 172.17.1.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
args:
executable: /bin/bash
register: public_ip
- name: get private ip address
shell: echo 172.17.2.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
args:
executable: /bin/bash
register: private_ip
- name: get tun ip address
shell: echo 172.17.3.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
args:
executable: /bin/bash
register: tun_ip
- name: get first interface name
shell: "ip a | grep enp | awk 'NR==1{print $2}' | tr -d :"
args:
executable: /bin/bash
register: firstport
- name: get second interface name
shell: "ip a | grep enp | awk 'NR==2{print $2}' | tr -d :"
args:
executable: /bin/bash
register: secondport
- name: Add hosts entry
lineinfile:
path: /etc/hosts
line: "{{ item.hosts }}"
with_items:
- { hosts: '172.17.2.54 bonchvisor04' }
- { hosts: '172.17.2.55 bonchvisor05' }
- { hosts: '172.17.2.56 bonchvisor06' }
- { hosts: '172.17.2.57 bonchvisor07' }
- { hosts: '172.17.2.58 bonchvisor08' }
- { hosts: '172.17.2.59 bonchvisor09' }
- { hosts: '172.17.2.60 bonchvisor10' }
- { hosts: '172.17.2.61 bonchvisor11' }
- { hosts: '172.17.2.62 bonchvisor12' }
- { hosts: '172.17.2.50 controller-ceph' }
- { hosts: '172.17.2.100 controller-virt' }
- { hosts: '172.17.2.200 controller-net' }
- name: copy chrony file
copy:
src: /etc/ansible/files/chrony.conf
dest: /etc/chrony.conf
owner: root
group: root
mode: 0640
- name: insert uio_pci_generic module
shell: modprobe uio_pci_generic
args:
executable: /bin/bash
- name: copy uio_pci_generic module file to autostart
copy: src=/etc/ansible/files/dpdk.conf dest=/etc/modules-load.d/dpdk.conf owner=root group=root mode=0640
- name: detect dpdk interface name
shell: driverctl -v list-devices | grep -i net | grep 82576 | awk '{print $1}'
args:
executable: /bin/bash
register: dpdk_bus
- name: change dpdk device#1 driver
shell: driverctl set-override {{ dpdk_bus.stdout_lines[0] }} uio_pci_generic
args:
executable: /bin/bash
- name: change dpdk device#2 driver
shell: driverctl set-override {{ dpdk_bus.stdout_lines[1] }} uio_pci_generic
args:
executable: /bin/bash
- name: upload selinux modules
copy: src=/etc/ansible/files/{{ item }} dest=/tmp owner=root group=root mode=0640
with_items:
- ovs-vswitchd.pp
- ovsdb-server.pp
- name: install selinux modules
shell: semodule -i /tmp/{{ item }}
with_items:
- ovs-vswitchd.pp
- ovsdb-server.pp
- name: enable isolcpu and hugepages in kernel
shell: grep GRUB_CMDLINE_LINUX /etc/default/grub | grep -c "hugepages" || true
register: hugepages_status
ignore_errors: true
- name: enable isolcpu in kernel
shell: grep GRUB_CMDLINE_LINUX /etc/default/grub | grep -c "isolcpus" || true
register: isolcpu_status
ignore_errors: true
- name: Enable isolcpu in grub
lineinfile: dest="/etc/default/grub" regexp='GRUB_CMDLINE_LINUX="(.*)"' line='GRUB_CMDLINE_LINUX="\1 isolcpus=2-3"' backrefs=yes
when: isolcpu_status.stdout == "0"
- name: Enable hugepages in grub
lineinfile: dest="/etc/default/grub" regexp='GRUB_CMDLINE_LINUX="(.*)"' line='GRUB_CMDLINE_LINUX="\1 hugepages=512"' backrefs=yes
when: hugepages_status.stdout == "0"
- name: modify grub to load hugepages
shell: grub2-mkconfig -o /boot/efi/EFI/centos/grub.cfg
args:
executable: /bin/bash
- name: check if hugepages fstab entry exist
shell: grep "^hugetlbfs" /etc/fstab || true
args:
executable: /bin/bash
register: test_grep
- name: modify fstab
lineinfile:
path: /etc/fstab
line: 'nodev /mnt/huge hugetlbfs defaults 0 0'
when: test_grep.stdout == ""
- name: Creates directory
file:
path: /mnt/huge
state: directory
- name: copy systemd service file to use hugepages on node0
copy:
src: /etc/ansible/files/hugetlb-gigantic-pages.service
dest: /usr/lib/systemd/system/hugetlb-gigantic-pages.service
owner: root
group: root
mode: 0640
- name: copy bash script file to use hugepages
copy:
src: /etc/ansible/files/hugetlb-reserve-pages.sh
dest: /usr/lib/systemd/hugetlb-reserve-pages.sh
owner: root
group: root
mode: 0750
- name: modify openvswitch startup users
replace:
path: /etc/sysconfig/openvswitch
regexp: '^OVS_USER_ID(.*)$'
replace: 'OVS_USER_ID="root:root"'
- name: enable and start libvirtd services
systemd:
state: started
enabled: yes
daemon_reload: yes
name: libvirtd.service
- name: enable and start chronyd services
systemd:
state: started
enabled: yes
daemon_reload: yes
name: chronyd.service
- name: enable and start service hugetlb-gigantic-pages
systemd:
state: started
name: hugetlb-gigantic-pages
enabled: yes
daemon_reload: yes
- name: enable and start opevswitchd
systemd:
state: started
name: openvswitch
enabled: yes
- name: ovs enable dpdk
shell: ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-init="true"
args:
executable: /bin/bash
- name: ovs dpdk config cpu mask
shell: ovs-vsctl --no-wait set Open_vSwitch . other_config:pmd-cpu-mask=0x4
args:
executable: /bin/bash
- name: ovs dpdk config memory usage
shell: ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-socket-mem="1024,0"
args:
executable: /bin/bash
- name: config dpdk port
shell: ovs-vsctl --may-exist add-br br-dpdk -- set bridge br-dpdk datapath_type=netdev
args:
executable: /bin/bash
- name: add dpdk port
shell: ovs-vsctl --may-exist add-bond br-dpdk dpdkbond p0 p1 lacp=active bond_mode=balance-tcp
args:
executable: /bin/bash
- name: add dpdk port
shell: ovs-vsctl set Interface p0 type=dpdk options:dpdk-devargs={{ dpdk_bus.stdout_lines[0] }}
args:
executable: /bin/bash
- name: add dpdk port
shell: ovs-vsctl set Interface p1 type=dpdk options:dpdk-devargs={{ dpdk_bus.stdout_lines[1] }}
args:
executable: /bin/bash
- name: collect old ifcfg-files
shell: ls /etc/sysconfig/network-scripts/ | grep ifcfg | grep -v 'ifcfg-lo\|ifcfg-ens1f0\|ens1f1' | awk '{print $1}'
args:
executable: /bin/bash
register: oldint
- name: delete old interface files
file:
state: absent
path: /etc/sysconfig/network-scripts/{{ item }}
loop: "{{oldint.stdout_lines}}"
when: oldint.stdout != ""
- name: cretae ifcfg-{{ firstport.stdout }} network config file
template:
src: /etc/ansible/files/networks/ifcfg-physicalif01
dest: /etc/sysconfig/network-scripts/ifcfg-{{ firstport.stdout }}
owner: root
group: root
mode: 0644
- name: cretae ifcfg-{{ secondport.stdout }} network config file
template:
src: /etc/ansible/files/networks/ifcfg-physicalif02
dest: /etc/sysconfig/network-scripts/ifcfg-{{ secondport.stdout }}
owner: root
group: root
mode: 0644
- name: create bond0 network config file
template:
src: /etc/ansible/files/networks/ifcfg-bond0
dest: /etc/sysconfig/network-scripts/ifcfg-bond0
owner: root
group: root
mode: 0644
- name: cretae main bridge network config file
template:
src: /etc/ansible/files/networks/ifcfg-br-ext-main
dest: /etc/sysconfig/network-scripts/ifcfg-br-ext-main
owner: root
group: root
mode: 0644
- name: cretae mgmt0 network config file
template:
src: /etc/ansible/files/networks/ifcfg-mgmt0
dest: /etc/sysconfig/network-scripts/ifcfg-mgmt0
owner: root
group: root
mode: 0644
- name: create int port network config file
template:
src: /etc/ansible/files/networks/ifcfg-port-int
dest: /etc/sysconfig/network-scripts/ifcfg-port-int
owner: root
group: root
mode: 0644
- name: create tun port network config file
template:
src: /etc/ansible/files/networks/ifcfg-port-tun
dest: /etc/sysconfig/network-scripts/ifcfg-port-tun
owner: root
group: root
mode: 0644
- name: remove NetworkManager
yum:
name: NetworkManager*
state: absent
- name: reboot to apply grub changes
reboot:
@@ -0,0 +1,27 @@
---
- hosts: bonchvisors
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
tasks:
- name: install openstack pike repository
yum:
name: centos-release-openstack-pike
state: latest
- name: upgrade all packages
yum:
name: '*'
state: latest
- name: install openstack client and selinux lib's
yum:
name: "{{ packages }}"
vars:
packages:
- python-openstackclient
- openstack-selinux
@@ -0,0 +1 @@
bonchvisor08
@@ -0,0 +1,150 @@
---
- hosts: bonchvisor14
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
tasks:
- name: install openstack nova compute elements
yum:
name: "{{ packages }}"
state: latest
vars:
packages:
- openstack-neutron-linuxbridge
- ebtables
- ipset
- openstack-nova-compute
- openstack-neutron-ml2
- openstack-neutron-openvswitch
- name: get public ip address
shell: echo 172.17.2.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
args:
executable: /bin/bash
register: public_ip
- name: get private ip address
shell: echo 172.17.3.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
args:
executable: /bin/bash
register: private_ip
- name: copy secret.xml file
copy:
src: /etc/ansible/files/secret.xml
dest: /etc/ceph/secret.xml
owner: root
group: root
mode: 0640
- name: copy ceph.client.vms.keyring file
copy:
src: /etc/ansible/files/ceph.client.vms.keyring
dest: /etc/ceph/ceph.client.vms.keyring
owner: root
group: nova
mode: 0640
- name: copy client.cinder.key file
copy:
src: /etc/ansible/files/client.cinder.key
dest: /etc/ceph/client.cinder.key
owner: root
group: root
mode: 0640
- name: copy vms-secret.xml file
copy:
src: /etc/ansible/files/vms-secret.xml
dest: /etc/ceph/vms-secret.xml
owner: root
group: root
mode: 0640
- name: copy client.vms.key file
copy:
src: /etc/ansible/files/client.vms.key
dest: /etc/ceph/client.vms.key
owner: root
group: root
mode: 0640
- name: create openvswitch_agent.ini
template:
src: /etc/ansible/files/openvswitch_agent.ini
dest: /etc/neutron/plugins/ml2/openvswitch_agent.ini
owner: root
group: neutron
mode: 0644
- name: create nova.conf
template:
src: /etc/ansible/files/nova.conf
dest: /etc/nova/nova.conf
owner: root
group: nova
mode: 0640
- name: create neutron.conf
template:
src: /etc/ansible/files/neutron.conf
dest: /etc/nova/neutron.conf
owner: root
group: neutron
mode: 0640
- name: virsh secret define
shell: virsh secret-define --file /etc/ceph/secret.xml
args:
executable: /bin/bash
register: required_uuid
- name: virsh secret set
shell: virsh secret-set-value --secret $(echo {{required_uuid.stdout }} | awk '{print $2}') --base64 $(cat /etc/ceph/client.cinder.key)
args:
executable: /bin/bash
- name: virsh vms secret define
shell: virsh secret-define --file /etc/ceph/vms-secret.xml
args:
executable: /bin/bash
register: required_vms_uuid
- name: virsh vms secret set
shell: virsh secret-set-value --secret $(echo {{ required_vms_uuid.stdout }} | awk '{print $2}') --base64 $(cat /etc/ceph/client.vms.key)
args:
executable: /bin/bash
- name: restart libvirtd services
systemd:
state: restarted
enabled: yes
daemon_reload: yes
name: libvirtd.service
- name: restart nova-compute services
systemd:
state: restarted
enabled: yes
daemon_reload: yes
name: openstack-nova-compute.service
- name: restart neutron-linux-brigde-agent services
systemd:
state: stopped
enabled: no
daemon_reload: yes
name: neutron-linuxbridge-agent.service
- name: restart neutron-openvswitch-agent services
systemd:
state: restarted
enabled: yes
daemon_reload: yes
name: neutron-openvswitch-agent.service
+18
View File
@@ -0,0 +1,18 @@
---
- hosts: bonchvisors
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
tasks:
- name: get controller mode
shell: "lspci | grep AHCI"
args:
executable: /bin/bash
register: AHCI_present
- name: get ahci present
debug:
msg: "{{ AHCI_present.stdout }}"
@@ -0,0 +1,173 @@
---
- hosts: bonchvisor09
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
tasks:
# - name: install openstack nova compute elements
# yum:
# name: "{{ packages }}"
# state: latest
# vars:
# packages:
# - openstack-neutron-linuxbridge
# - ebtables
# - ipset
# - openstack-nova-compute
# - openstack-neutron-ml2
# - openstack-neutron-openvswitch
- name: restart openvswitch services
systemd:
state: restarted
enabled: yes
daemon_reload: yes
name: openvswitch.service
- name: get public ip address
shell: echo 172.17.2.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
args:
executable: /bin/bash
register: public_ip
- name: get private ip address
shell: echo 172.17.3.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
args:
executable: /bin/bash
register: private_ip
- name: get first interface name
shell: "ip a | grep enp | awk 'NR==1{print $2}' | tr -d :"
args:
executable: /bin/bash
register: firstport
- name: get second interface name
shell: "ip a | grep enp | awk 'NR==2{print $2}' | tr -d :"
args:
executable: /bin/bash
register: secondport
# - name: cretae tetmplate file with ip
# template:
# src: /etc/ansible/files/networks/testfile.j2
# dest: /etc/file.conf
# owner: root
# group: root
# mode: 0644
- name: collect old ifcfg-files
shell: ls /etc/sysconfig/network-scripts/ | grep ifcfg | grep -v 'ifcfg-lo\|ifcfg-ens1f0\|ens1f1' | awk '{print $1}'
args:
executable: /bin/bash
register: oldint
- name: delete old interface files
file:
state: absent
path: /etc/sysconfig/network-scripts/{{ item }}
loop: "{{oldint.stdout_lines}}"
when: oldint.stdout != ""
- name: cretae ifcfg-{{ firstport.stdout }} network config file
template:
src: /etc/ansible/files/networks/ifcfg-physicalif01
dest: /etc/sysconfig/network-scripts/ifcfg-{{ firstport.stdout }}
owner: root
group: root
mode: 0644
- name: cretae ifcfg-{{ secondport.stdout }} network config file
template:
src: /etc/ansible/files/networks/ifcfg-physicalif02
dest: /etc/sysconfig/network-scripts/ifcfg-{{ secondport.stdout }}
owner: root
group: root
mode: 0644
- name: cretae bond0 network config file
template:
src: /etc/ansible/files/networks/ifcfg-bond0
dest: /etc/sysconfig/network-scripts/ifcfg-bond0
owner: root
group: root
mode: 0644
- name: cretae main bridge network config file
template:
src: /etc/ansible/files/networks/ifcfg-br-ext-main
dest: /etc/sysconfig/network-scripts/ifcfg-br-ext-main
owner: root
group: root
mode: 0644
- name: cretae mgmt0 network config file
template:
src: /etc/ansible/files/networks/ifcfg-mgmt0
dest: /etc/sysconfig/network-scripts/ifcfg-mgmt0
owner: root
group: root
mode: 0644
- name: cretae main bridge network config file
template:
src: /etc/ansible/files/networks/ifcfg-port-int
dest: /etc/sysconfig/network-scripts/ifcfg-port-int
owner: root
group: root
mode: 0644
- name: check ovs bond exist
shell: ovs-vsctl show | grep bond0 | awk '{print $2}'
args:
executable: /bin/bash
register: bondexist
- name: check mgmt0 port exist
shell: ovs-vsctl show | grep Port | grep mgmt0 | awk '{print $2}'
args:
executable: /bin/bash
register: mgmtexist
- name: check mgmt-bidge exist
shell: ovs-vsctl show | grep br-mgmt | awk '{print $2}'
args:
executable: /bin/bash
register: brmgmtexist
- name: create bond if no exist
shell: ovs-vsctl add-bond ovs-main bond0 {{ firstport.stdout }} {{ secondport.stdout }}
args:
executable: /bin/bash
when: bondexist.stdout == ""
- name: set bond lacp to active
shell: ovs-vsctl set port bond0 lacp=active
args:
executable: /bin/bash
when: bondexist.stdout == ""
- name: create management bridge
shell: ovs-vsctl add-br br-mgmt ovs-main 162
args:
executable: /bin/bash
when: brmgmtexist.stdout == ""
- name: add management port mgmt0
shell: ovs-vsctl add-port br-mgmt mgmt0 -- set interface mgmt0 type=internal
args:
executable: /bin/bash
when: mgmtexist.stdout == ""
- name: restart network services
systemd:
state: restarted
enabled: yes
daemon_reload: yes
name: network.service
+122
View File
@@ -0,0 +1,122 @@
---
- hosts: bonchvisors
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
tasks:
- name: install openstack nova compute elements
yum:
name: "{{ packages }}"
state: latest
vars:
packages:
- ebtables
- ipset
- openstack-nova-compute
- openstack-neutron-ml2
- openstack-neutron-openvswitch
# - name: restart openvswitch services
# systemd:
# state: restarted
# enabled: yes
# daemon_reload: yes
# name: openvswitch.service
- name: get public ip address
shell: echo 172.17.2.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
args:
executable: /bin/bash
register: public_ip
- name: get private ip address
shell: echo 172.17.3.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
args:
executable: /bin/bash
register: private_ip
- name: get tunnel ip address
shell: echo 172.17.1.$((50+$(echo $HOSTNAME | awk -F "bonchvisor" '{print $2}' | sed 's/^0*//')))
args:
executable: /bin/bash
register: tunnel_ip
# - name: creat first externalbridge patchpanel network config file
# template:
# src: /etc/ansible/files/networks/ifcfg-patch-main-ext01
# dest: /etc/sysconfig/network-scripts/ifcfg-patch-main-ext01
# owner: root
# group: root
# mode: 0644
# - name: creat second external bridge patchpanel network config file
# template:
# src: /etc/ansible/files/networks/ifcfg-patch-main-ext02
# dest: /etc/sysconfig/network-scripts/ifcfg-patch-main-ext02
# owner: root
# group: root
# mode: 0644
- name: create openvswitch_agent.ini config file
template:
src: /etc/ansible/files/openvswitch_agent.ini
dest: /etc/neutron/plugins/ml2/openvswitch_agent.ini
owner: root
group: root
mode: 0644
- name: create ml2_conf.ini config file
template:
src: /etc/ansible/files/ml2_conf.ini
dest: /etc/neutron/plugins/ml2/ml2_conf.ini
owner: root
group: root
mode: 0644
- name: create nova.conf config file
template:
src: /etc/ansible/files/nova.conf
dest: /etc/nova/nova.conf
owner: root
group: root
mode: 0644
#slave bridge creation
# - name: detect all bridges, except ovs-main
# shell: ovs-vsctl list-br | grep -v "ovs-main" | awk "{print $1}"
# args:
# executable: /bin/bash
# register: oldbridges
# - name: clear all bridges, except ovs-main
# shell: ovs-vsctl --if-exist del-br {{ item }}
# args:
# executable: /bin/bash
# loop: "{{oldbridges.stdout_lines}}"
# when: oldbridges.stdout != ""
- name: restart neutron-openvswitch
systemd:
state: restarted
enabled: yes
daemon_reload: yes
name: neutron-openvswitch-agent.service
- name: restart openstack-nova
systemd:
state: restarted
enabled: yes
daemon_reload: yes
name: openstack-nova-compute.service
+20
View File
@@ -0,0 +1,20 @@
---
- hosts: bonchvisor04
remote_user: cephadmin
become: true
become_user: root
become_method: sudo
tasks:
- name: detect dpdk interface name
shell: /usr/sbin/driverctl -v list-devices | grep -i net | grep 82576 | awk '{print $1}'
args:
executable: /bin/bash
register: dpdk_bus
- name: check dpdk_bus
debug:
msg: "{{ dpdk_bus.stdout_lines[1] }}"
+16
View File
@@ -0,0 +1,16 @@
#/bin/bash
devname=$1
size=$2
partsize=$(( $size * 1024 * 1024 * 2 ))
start=$(( $(parted $devname 'unit % print' | grep -v extended | tail -2 | grep . | awk '{print $3}' | tr -d %| cut -f1 -d".") + 1 ))
for i in {1..4}; do
parted $devname mkpart ext2 "$(( $start + $(( $(( $i - 1 )) * 10 )) ))"% "$(( $start + $(( $i*10 )) ))"%
done
+38
View File
@@ -0,0 +1,38 @@
#!/bin/bash
devname=$1
extended_exist=$(parted $devname print | grep extended)
logical_exist=$(parted $devname print | grep -v Sector | grep logical)
size=$2
echo "extended value is :$extended_exist-"
echo "logical value is:$logical_exist-"
if [ -z "$extended_exist" ]
then
echo "extended no exist, creating.."
free=$(parted $devname 'unit s print' | grep -v extended | tail -2 | grep . | awk '{print $3}' | tr -d s)
free=$(( $free+1 ))
parted $devname mkpart extended "$free"s 100%
echo "logical no exist, creating.."
for i in {1..4}; do
free=$(parted $devname 'unit % print' | grep -v extended | tail -2 | grep . | awk '{print $3}' | tr -d %| cut -f1 -d".")
free=$(( $free+1 ))
end=$(awk -v a="$free" -v b="$size" 'BEGIN {print a + b}')
parted $devname mkpart logical ext2 $(echo $free)% $(echo $end)%
done
elif [ -z "$logical_exist" ]
then
echo "extended exist, but logical no exist, creating.."
for i in {1..4}; do
free=$(parted $devname 'unit % print' | grep -v extended | tail -2 | grep . | awk '{print $3}' | tr -d %| cut -f1 -d".")
free=$(( $free+1 ))
end=$(awk -v a="$free" -v b="$size" 'BEGIN {print a + b}')
parted $devname mkpart logical ext2 $(echo $free)% $(echo $end)%
done
fi
+8
View File
@@ -0,0 +1,8 @@
#/bin/bash
devname=$1
start=$(( $(parted $devname 'unit % print' | grep -v extended | tail -2 | grep . | awk '{print $3}' | tr -d %| cut -f1 -d".") + 1 ))
parted $devname mkpart ext2 "$start"% 100%
Binary file not shown.

After

Width:  |  Height:  |  Size: 60 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 119 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 89 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 118 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 118 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 131 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 157 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 31 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 63 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 27 KiB

BIN
View File
Binary file not shown.

After

Width:  |  Height:  |  Size: 38 KiB

+1
View File
@@ -0,0 +1 @@
+30
View File
@@ -0,0 +1,30 @@
#!/bin/bash
case $1 in
-n)
k=$2
;;
start)
for i in $(seq 1 `nproc`); do sha1sum /dev/zero &2>1; done
exit 0
;;
stop)
pkill -f sha1sum
exit 0
;;
*)
echo wrong paremeters, exit...
exit 1
esac
case $3 in
start)
for i in $(seq 1 $k); do sha1sum /dev/zero &2>1; done
;;
stop)
pkill -f sha1sum
;;
*)
echo wrong paremeters, exit...
exit 1
esac
BIN
View File
Binary file not shown.
BIN
View File
Binary file not shown.
+27
View File
@@ -0,0 +1,27 @@
#!/usr/bin/python3.6
import os
import sys
import re
new_args = ['/usr/libexec/qemu-kvm.origin']
flag = 0
for i in range(1,len(sys.argv)+1):
if sys.argv[i-1] == "-cpu":
subargs = sys.argv[i].split(",")
if not ("kvm=off" in subargs): subargs.insert(1,"kvm=off")
for key in subargs:
if (re.findall('hv_vendor_id=.*', key).__len__()): flag = 1
if not flag: subargs.insert(2,"hv_vendor_id=Some_Coffee")
new_arg = ",".join(subargs)
new_args.append(new_arg)
continue
try:
new_args.append(sys.argv[i])
except IndexError:
pass
os.execv('/usr/libexec/qemu-kvm.origin', new_args)