Ivan Nardi b2a8b48386 Fix compilation and CI (#1875)
ubuntu-latest s390x CI doesn't like snapshot bigger than 262144 bytes.

Fix an error found by fuzz CI

```
=================================================================
==55399==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000008 (pc 0x561e41cb684d bp 0x7ffd54ce3650 sp 0x7ffd54ce3520 T0)
==55399==The signal is caused by a READ memory access.
==55399==Hint: address points to the zero page.
    #0 0x561e41cb684d in ndpi_network_ptree_match /home/ivan/svnrepos/nDPI/src/lib/ndpi_main.c:2321:41
    #1 0x561e41d30879 in ndpi_guess_undetected_protocol /home/ivan/svnrepos/nDPI/src/lib/ndpi_main.c:7767:8
    #2 0x561e41ca804d in LLVMFuzzerTestOneInput /home/ivan/svnrepos/nDPI/fuzz/fuzz_config.cpp:104:5
    #3 0x561e41bb96a0 in fuzzer::Fuzzer::ExecuteCallback(unsigned char const*, unsigned long) (/home/ivan/svnrepos/nDPI/fuzz/fuzz_config+0x4726a0) (BuildId: d4741c753aafe7c0df2681a592b7df16b38240e9)
    #4 0x561e41ba3c2f in fuzzer::RunOneTest(fuzzer::Fuzzer*, char const*, unsigned long) (/home/ivan/svnrepos/nDPI/fuzz/fuzz_config+0x45cc2f) (BuildId: d4741c753aafe7c0df2681a592b7df16b38240e9)
    #5 0x561e41ba96f6 in fuzzer::FuzzerDriver(int*, char***, int (*)(unsigned char const*, unsigned long)) (/home/ivan/svnrepos/nDPI/fuzz/fuzz_config+0x4626f6) (BuildId: d4741c753aafe7c0df2681a592b7df16b38240e9)
    #6 0x561e41bd22e2 in main (/home/ivan/svnrepos/nDPI/fuzz/fuzz_config+0x48b2e2) (BuildId: d4741c753aafe7c0df2681a592b7df16b38240e9)
    #7 0x7f94f0e5c082 in __libc_start_main /build/glibc-SzIz7B/glibc-2.31/csu/../csu/libc-start.c:308:16
    #8 0x561e41b9eb0d in _start (/home/ivan/svnrepos/nDPI/fuzz/fuzz_config+0x457b0d) (BuildId: d4741c753aafe7c0df2681a592b7df16b38240e9)
```
2023-01-25 14:49:45 +01:00
2023-01-24 22:58:17 +01:00
2022-12-11 10:24:42 +01:00
2022-10-31 13:53:23 +01:00
2022-09-21 08:24:37 +02:00
2023-01-25 14:49:45 +01:00
2023-01-25 14:49:45 +01:00
2022-10-01 12:01:41 +02:00
2023-01-24 22:58:17 +01:00
2019-07-23 10:47:25 +01:00
2015-04-19 07:25:59 +02:00
2015-04-19 07:25:59 +02:00

ntop ntop

nDPI

Build Status Fuzzing Status

What is nDPI ?

nDPI® is an open source LGPLv3 library for deep-packet inspection. Based on OpenDPI it includes ntop extensions. We have tried to push them into the OpenDPI source tree but nobody answered emails so we have decided to create our own source tree

How To Compile nDPI

In order to compile this project do

  • ./autogen.sh
  • make

To compile the library w/o any tools or tests:

  • ./autogen.sh --with-only-libndpi
  • make

To run tests do additionally:

  • ./tests/do.sh # Generate and check for diff's in PCAP files
  • ./tests/do-unit.sh # Run unit tests
  • ./tests/do-dga.sh # Run DGA detection test

or run all with: make check

Please note that the (minimal) pre-requisites for compilation include:

  • GNU tools (autoconf automake libtool pkg-config gettext flex bison)
  • GNU C compiler (gcc) or Clang

On Debian/Ubuntu systems do:

  • sudo apt-get install build-essential git gettext flex bison libtool autoconf automake pkg-config libpcap-dev libjson-c-dev libnuma-dev libpcre2-dev libmaxminddb-dev librrd-dev

On Arch Linux:

  • sudo pacman -S gcc git gettext flex bison libtool autoconf automake pkg-config libpcap json-c numactl pcre2 libmaxminddb rrdtool

On FreeBSD:

  • sudo pkg install gcc git gettext flex bison libtool autoconf automake devel/pkgconf gmake libpcap json-c pcre2 libmaxminddb rrdtool

Remember to use gmake and not make on FreeBSD

On MacOS:

  • brew install coreutils gcc git gettext flex bison libtool autoconf automake pkg-config libpcap json-c pcre2 libmaxminddb rrdtool

On Windows:

There are three supported ways to build nDPI:

  1. MSYS2 (assuming MSYS2 already installed):
  • msys2 -c "pacman --noconfirm -S --needed --overwrite '*' git mingw-w64-x86_64-toolchain automake1.16 automake-wrapper autoconf libtool make mingw-w64-x86_64-json-c mingw-w64-x86_64-crt-git mingw-w64-x86_64-pcre mingw-w64-x86_64-libpcap"
  1. Mingw-w64

  2. Visual Studio (see windows/nDPI.sln)

Note: All Windows versions require npcap with WinPcap compatibility mode enabled.

How To Build The Documentation

  • pip install --upgrade pip
  • pip install -r doc/requirements.txt
  • make doc

Use the builtin python3 webserver to view documentation:

  • make doc-view

How To Add A New Protocol Dissector

The entire procedure of adding new protocols in detail:

  1. Add new protocol together with its unique ID to: src/include/ndpi_protocol_ids.h
  2. Create a new protocol in: src/lib/protocols/
  3. Variables to be kept for the duration of the entire flow (as state variables) need to be placed in: src/include/ndpi_typedefs.h in ndpi_flow_tcp_struct (for TCP only), ndpi_flow_udp_struct (for UDP only), or ndpi_flow_struct (for both).
  4. Add a new entry for the search function for the new protocol in: src/include/ndpi_protocols.h
  5. Choose (do not change anything) a selection bitmask from: src/include/ndpi_define.h
  6. Set protocol default ports in ndpi_init_protocol_defaults in: src/lib/ndpi_main.c
  7. Be sure to have nBPF support, cloning PF_RING in the same directory where you cloned nDPI: git clone https://github.com/ntop/PF_RING/ && cd PF_RING/userland/nbpf && ./configure && make
  8. From the nDPI root directory, ./autogen.sh --with-pcre (nBPF and PCRE are usually optional, but they are needed to run/update all the unit tests)
  9. make
  10. make check

How to use nDPI to Block Selected Traffic

You can use nDPI to selectively block selected Internet traffic by embedding it onto an application (remember that nDPI is just a library). Both ntopng and nProbe cento can do this.

nDPI Paper Citation

Videos and Presentations

DISCLAIMER

While we do our best to detect network protocols, we cannot guarantee that our software is error free and 100% accurate in protocol detection. Please make sure that you respect the privacy of users and you have proper authorization to listen, capture and inspect network traffic.

nDPI is a registered trademark in the US and EU.

S
Description
No description provided
Readme
226 MiB
Languages
C 91.8%
Lua 2.3%
C++ 2%
Makefile 1.3%
Shell 1.1%
Other 1.5%